Ring RPP70 Manuel utilisateur

12v

only

<40°c

Compact

PowerPack

RPP70 - 12v, 7Ah Compact PowerPack

www.ringautomotive.co.uk

Instructions

The ultimate automotive essential...

The ideal leisure accessory

Fully charge this product before use - Charge time 30 hours

Powering 7Ah PowerPack Instructions.indd 1 30/04/2010 13:39

Contents

Safety

Caution

RPP70 PowerPack Instructions

AC Mains Charger

Input: 220/240v

Output: 13.5v 500mA

Replacement part number: RPT50

Reverse Polarity Protection

Ensure no power is transfered if

the booster cables are connected

incorrectly.

To maintain optimum performance and long term life this PowerPack must

be fully recharged:

• Every 3 months if not used

• Before each use

• After each use

• From complete discharge the PowerPack will take 30 hours to fully charge

Anti-Arc Protection

The battery clips will not spark if

touched together.

Circuit Protection

Prevents too much power draw from

the DC outlet, prevents surging.

12v

only

<40°c

12v

only

Powering 7Ah PowerPack Instructions.indd 2 30/04/2010 13:39

4Features

12v DC

socket

12v DC

socket

1x Battery status

indicators

Charge status

indicator

Connection

Indicator

LED work lightOn/Off switch Reverse polarity

protection

Selection

switch

USB

applications

0% 25% 75% 100%

Powering 7Ah PowerPack Instructions.indd 3 30/04/2010 13:39

AC charging

Recharging the PowerPack

30 hours

Disconnect any 12v DC appliances

• Plug the 230v AC mains charger into the

charging socket on the PowerPack

• Plug the mains charger into 230v AC mains supply

• Turn on mains supply

• Charging is indicated by the red ‘Charging indicator’

LED illuminating

• Once charging is complete the ‘Charging / Charged’ LED will

change from red to green

• A full charge takes approximately 30 hours

NB: If the charge light changes to green before 30 hours on

the initial charge, continue charging for the remainder of

the 30 hours.

Powering 7Ah PowerPack Instructions.indd 4 30/04/2010 13:39

Vehicle jumpstarting

Ensure the ON/OFF switch is in the ‘OFF’ position

Disconnect any 12v DC appliances

Turn off the LED work light

Turn off the vehicle ignition

Position the PowerPack on a ﬂat surface away from engine

moving parts.

Connect the booster cable

Red (+) clip to the red positive (+) battery terminal

Black (-) clip to the black (-) battery terminal

Check Connection

If the Reverse polarity indication LED illuminates the battery

clips are connected incorrectly. Check the connections and retry.

Rotate the ON/OFF switch to the ‘ON’ position.

Ensure cables are clear of moving parts before starting the engine.

Powering 7Ah PowerPack Instructions.indd 5 30/04/2010 13:39

Turn over the engine in 3 second bursts until the engine starts.

With the vehicle’s engine running, leave the PowerPack for 2-3mins

to fast charge the PowerPacks batteries before disconnecting.

DC appliances are connected and powered by connecting to the

PowerPacks DC power socket.

The LED work light is operated by sliding the selection switch the

LED position.

The USB charging socket allows the recharging of electronic

devices including moblie phones and MP3 players

The USB feature is selected by sliding the selection switch to the

USB position.

Disconnect booster cables

For optimum and long life performance ‘RECHARGE THE

POWERPACK’.

12v DC Power

LED Work Light

USB charging socket

12v DC

socket

Powering 7Ah PowerPack Instructions.indd 6 30/04/2010 13:39

10 Speciﬁcations

Internal battery Sealed Lead Acid

Internal battery capacity 7Ah

DC socket maximum

continuous load 12A

DC power socket circuit

breaker (auto reset) 12A

Integral work lamp LED

Jump start cables 0.5m

PowerPack

Dimensions

260mm (L)

x 100mm (W)

x 330mm (H)

Weight 2.8 kg

Spare Parts Part No.

AC mains charger RPT50

Caution:

No serviceable parts. Do not use if leads are damaged -

danger of shock

Powering 7Ah PowerPack Instructions.indd 7 30/04/2010 13:39

Distributed by: Ring Automotive Limited,

Gelderd Road, Leeds, England LS12 6NA

+44 (0)113 213 2000 +44 (0)113 231 0266

autosales@ringautomotive.co.uk www.ringautomotive.co.uk

Powering 7Ah PowerPack Instructions.indd 8 30/04/2010 13:39

Table des matières

Autres manuels ring Bloc d'alimentation

ring

ring UK Series Manuel utilisateur

ring

ring RPP100 Standard Manuel utilisateur

ring

ring Power Pack Manuel utilisateur

ring

ring TradeStart Manuel utilisateur

ring

ring RPP900 Manuel utilisateur

ring

ring TradeStart RPPS3000 Manuel utilisateur

ring

ring RPP148 Manuel utilisateur

ring

ring TradeStart RPPM3000 Manuel utilisateur

ring

ring TradeStart RPPS4000 Manuel utilisateur

Manuels Bloc d'alimentation populaires d'autres marques

EcoFlow

EcoFlow Wave 2 Manuel utilisateur

Schumacher

Schumacher DSR PRO Series Manuel utilisateur

Draper

Draper 12V Power Packs Manuel utilisateur

Haug

Haug Multistat Ex SDN Manuel utilisateur

Intermatic

Intermatic IOS-PP24 Guide rapide

Makita

Makita PDC01 Manuel utilisateur

Skiva

Skiva AC110 Manuel utilisateur

Bluetti

Bluetti AC60P Manuel utilisateur

Draper

Draper PP12VA Manuel utilisateur

Goodsmann

Goodsmann 9920-0300-01 Manuel utilisateur

Risen

Risen RSN-BX007 Manuel utilisateur

Hama

Hama A4 Series Manuel utilisateur

Bluetti

Bluetti AC500 Manuel utilisateur

Graco

Graco GH 24X011 Manuel de la liste des pièces

Hama

Hama 00187292 Manuel utilisateur

HYCON

HYCON HPP09 Manuel d'instructions

Tycon Power Systems

Tycon Power Systems TP-PP120-INV Manuel utilisateur

Celestron

Celestron PowerTank 17 18777 Manuel utilisateur

ring RPP70 Manuel utilisateur

Manuels Bloc d'alimentation populaires d'autres marques