Ring VIDEO DOORBELL Manuel utilisateur

Video Doorbell

User Manual

Set up your

Video Doorbell

near your wiﬁ

router.

In the Ring app, select

Set Up a Device.

When prompted, select Doorbells,

and follow the in-app instructions.

If you have problems with video quality after installation,

you may need to move your router closer to your door,

or add a Ring Chime Pro. Learn more at: ring.com/chime-pro

Try it out. After setup, push the button on

the front of your Video Doorbell

to see video from the camera in

the Ring app.

You’ll need it for the next step,

so write it down below.

Grab your

wiﬁ password.

The Ring app walks you through

setting up and managing your

Video Doorbell.

Search for “Ring” in one of the app

stores below, or visit ring.com/app

Plug it into a USB power source with

the included cable. Once the light

ring is fully lit, it’s ready to use.

Download the

Ring app.

Charge your

Video Doorbell.

4 feet

(48 inches)

1.2 metres

(120 cm)

For optimal performance, install

About 1.2 metres o the ground

above the ground.

If you’re connecting to existing

doorbell wiring that’s higher than

four 1.2 metres and want to angle

your Video Doorbell down for

a better view, you can purchase

a Wedge Kit here:

ring.com/accessories

Select an

install location.

Motion detection range

Camera ﬁeld of view

First, shut o power at the breaker.

Then, remove your existing

doorbell button from the wall

and disconnect the wires.

Remove

your existing

doorbell.

Use the bracket as a template

to mark the four corner holes.

The recommended install

height is 4 About 1.2 metres

o the ground.

Mark the

screw holes.

Install the

anchors.

(optional)

On stucco, brick, or concrete, use

the provided bit to drill holes in

your wall, then insert the anchors.

(If you’re installing on wood or

siding, you can skip this step.)

Install the

mounting

bracket.

Use the phillips head side of the

Ring screwdriver to screw in the

mounting bracket.

Keep the orange screwdriver handy. You’ll need it to take your

Video Doorbell o the wall for charging.

Please see the included pamphlet for installation precautions.

If you’re wiring your Video

Doorbell, feed your doorbell

wires through the hole in the

mounting bracket ﬁrst.

Drive the screws into your

wall (or into the anchors, if

installed) until they are ﬂush

with the mounting bracket.

Connect

the wires.

(optional)

Connect your doorbell wires to the

screws on the rear of your Video

Doorbell. It doesn’t matter which

wire connects to each screw.

Install the

mounting

bracket.

(continued)

The wiring must be connected to a transformer with a voltage

of 8VAC – 24VAC (50 or 60 Hz, 40VA max output) and an

internal doorbell or resistor.

Do not connect to a DC transformer, halogen or lighting

transformer, or intercom.

10 11

Hook the slot on the rear of your

Video Doorbell onto the tab near

the top of the mounting bracket.

Then, let the Doorbell pivot

down to sit ﬂush on its bracket.

Secure your

Video Doorbell.

Your Video

Doorbell is now

ready to use.

Use the star-shaped end of the

included screwdriver to drive the

two security screws into the bottom

of your Video Doorbell.

If you wired in your Video Doorbell,

you can now restore power at

the breaker.

Attach your

Video Doorbell

to the mounting

bracket.

For additional help, visit:

ring.com/help

Or give us a call:

UK: 01727 26 3045

US: 1 800 656 1918

Canada: 1 855 300 7289

Worldwide: +1 310 929 7085

To review your warranty coverage, please visit

www.eu.ring.com/pages/warranty

Ring and all related logos are trademarks of

Ring LLC or its aliates.

For a list of all our customer support

numbers, visit: ring.com/callus

Autres manuels pour VIDEO DOORBELL

Ce manuel convient aux modèles suivants

Autres manuels ring Accessoires

ring

ring Doorbell Pro Instructions d'utilisation et de sécurité

ring

ring BHAGC001 Manuel utilisateur

ring

ring Pro 2 Manuel utilisateur

ring

ring Video Doorbell 3 Manuel utilisateur

ring

ring Video Doorbell 3 Instructions d'utilisation et de sécurité

ring

ring 5F52E9 Manuel de l'opérateur

ring

ring Door View Cam Manuel utilisateur

ring

ring Protect Kit Manuel utilisateur

ring

ring VIDEO DOORBELL Manuel utilisateur

ring

ring Contact Sensor 2nd Generation Z-Wave Manuel utilisateur

ring

ring Doorbell Pro 2 Manuel utilisateur

ring

ring BHAJB001 Mode d’emploi

ring

ring Stick Up Cam Instructions d'utilisation et de sécurité

ring

ring Peephole Cam Manuel utilisateur

ring

ring chime Manuel utilisateur

ring

ring Video Doorbell 4 Plus Manuel utilisateur

ring

ring Video Doorbell 4 Manuel utilisateur

ring

ring Doorbell Pro 2 Manuel utilisateur

ring

ring Contact Sensor Manuel utilisateur

ring

ring BHALP021 Manuel utilisateur

ring

ring Doorbell Pro Manuel utilisateur

ring

ring Video Doorbell 4 Manuel utilisateur

ring

ring Video Doorbell 3 Manuel utilisateur

ring

ring 5UM5E5 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur