RIMOO KiriB Manuel utilisateur
Rimoo (Foshan) Electrical Appliances Co., Ltd.
KiriB Intelligent Air Humidifier
Instruction Manual
1) Use at normal ambient temperature (5°C -40°C)；
2) Place on the leveling position to avoid slant;
3) Do not directly use the humidifier on the wood floor to avoid damp, deformation or damage;
4) Use the humidifier away from the furniture and home appliances for more than 2 meters for
use to avoid damp;
5) Keep the humidifier away from thermal source and avoid direct sunlight;
6) Must not inject hot water above 40°C to the water tank and slot to avoid damage of machine;
7) Pour the water out of the water tank to avoid damage of machine due to freeze at ambient
temperature under 0°C
8) DO NOT put the metal, chemical medicine and detergent into the water tank, otherwise,
there will be poor atomization.
1. DO NOT unplug with wet hands to avoid electric shock;
2. DO NOT dismantle, repair or modify without authorization;
3. The power cord shall neither be scratched, damaged, knotted nor pressed with weight,
clamped nor processed. Otherwise, Electric shock, short circuit or fire may incur.
4. DO NOT replace the power supply without authorization. Immediately unplug and
5. The damaged power line must be replaced by the manufacture or its servicing department
or similar professional servicing department or specialist to avoid danger.
Private replacement is not allowed.
6. DO NOT separate the water tank during the operation;
7. The machine is for indoor use only;
8. Unplug in the thunderstorm weather or for long-term non-use.
9. DO NOT make children or the person without ability of daily living operate the humidifier.
Nozzle
Oscillator
Control box
Inner lid
Connector
Water tank
Muffler
KiriB humidifier atomizes the water to be ultrafine particles with size of 1-5 micron in the
principle that ultrasonic wave generates 1.7 million times of high-frequency oscillation per
second, and diffuses the water mist to the air through pneumatic device, so as to evenly
humidify the air. The humidifier can maintain ideal humidity in the living room, and avoid
generation for static electricity.
The humidifier is top water filling directly into the tank for convenient use. All parts in contact
with water are washable for easy cleaning and maintenance.
1. Unpack and put the humidifier on the leveling table top;
2. Take off the lid cover and inner lid, pour water into water tank below Max level;
3. Make sure the sealing ring is placed onto the inner lid;
4. Connect the oscillator terminal onto the inner lid socket;
5. Place the inner lid with oscillator into the water tank, there is a flute on the inner lid to match
the emboss of the tank to make sure the right direction, please notice;
6. Place the mist nozzle assembly onto the top, you can also pour water into the water tank
through the mist hole when product working;
7. Power on the product, touching control the “ ” to turn on the machine. Touch the
“ ” to select the mist volume L/M/H. Touch the “ ” to set the timer 2/4/8/12 hours.
8. Turn the mist nozzle as you want at 360° direction.
Touch control and Indicators display
1. Touch the“ ” button, product start working and the indicator ON, also the “L” indicator
ON, product work at the max mist level.
Touch the“ ” button again, the machine stop working and enter the standby mode,
“ ” indicator flashing and other indicators off.
2. Touch the “ ” button to switch the mist level from “L” to “M” to “H” and repeat a circle.
Keep the data you choose and the humidity level is set.
3. Touch the “ ” button to set timing. Touch the “ ” to switch thetiming from “0” to
“4” to “8” to “12” to timer off and repeat to choose the timer. After you choose the timer you
want, just keep it and the timer set.
4. When the timer end, the machine stop working and enter the standby mode, “ ”
indicator flashing and other indicator off. If no timer setting and it will keep working until no
water inside.
5. When the fan is blocked or short of water, all 8 indicators will be flashing.
6. When the machine stop working in normal situation, the fan will automatically stop 30s later.
You can fill water into the water tank or through the mist hole.
1) Take out the lid cover and all other parts can be washable
2) Take out the oscillator and wash with cleaning brush.
3) Move the silicon ring from the inner lid and wash with cleaning brush
4) Wash the water tank and inner lid by cloth or cleaning brush.
All parts in contact with water are washable.
Light out, no air and no mist?
Cause analysis: Not plug in or something wrong
Handling:
Reconnect the power. If the humidifier still can not be operated normally,
Light on, no air and no mist?
Cause analysis: Too high water level in the water tank
Handling:
Pour out some water in the water tank below the max line.
All light blink and product can not work?
Cause analysis: Product protection
Handling:
1) Check if there is no water inside tank, if no water, please add water
2) If there is water inside tank, unplug the product and re plug on, to check if it works
3) After step 2, if the all lights still blink, press the off button, then long press the mist button
for 3s, all light will be lighted for 0.5s, product comes to out of factory setting,
restart the product, then it can work.
Model: KiriB
Innovative air humidifier for health and easy operation
• Large Clear Water tank for room decoration rather than humidifier
• Two ways top water filling, from the nozzle or directly into tank
• Whisper-Quiet technology
• All parts in contact with water are washable and easy cleaning
• Working mode: Ultrasonic
• Water tank capacity: 4.5L
• Mist volume: H/M/L, Max 280ml
• Max working time: 13 hours (9 hours timer)
• Power input : 24VDC 24W or 24VDC 1A
• Soft touch control panel
• Overheat protection
Autres manuels RIMOO Humidificateur
