Riedel Bolero Manuel utilisateur

Bolero Antenna

Quick Start Guide

A00

03-301HB01EG

DRAFT

UNDER THE COPYRIGHT LAWS, THIS MANUAL MAY NOT BE COPIED, IN WHOLE OR IN PART, WITHOUT THE WRITTEN CONSENT OF RIEDEL. EVERY

EFFORT HAS BEEN MADE TO ENSURE THAT THE INFORMATION IN THIS MANUAL IS ACCURATE. RIEDEL IS NOT RESPONSIBLE FOR PRINTING OR

CLERICAL ERRORS. ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference

at his own expense.

Changes or modifications made to this equipment not expressly approved by Riedel may void the FCC authorization to operate this equipment.

Radiofrequency radiation exposure Information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

DRAFT

Bolero Antenna Quick Start Guide A00

CONTENT

1Preface 4

Information ........................................................................................................................................................ 51.1

About Bolero ...................................................................................................................................................... 81.2

2Bolero Antenna 9

Operating Elements .......................................................................................................................................... 92.1

Status LEDs ...................................................................................................................................................... 112.2

Getting Started ................................................................................................................................................ 132.3

Technical Specifications .................................................................................................................................. 132.4

3Appendix 14

Service .............................................................................................................................................................. 143.1

Notes ................................................................................................................................................................ 153.2

Index .............................................................................................................................................................................. 17

DRAFT

Bolero Antenna Quick Start Guide A00

1 Preface

Thank you for choosing a Riedel product.

This PDF document provides detailed information about the Bolero Antenna, pin outs, mechanical and electrical data.

For further information, please refer to the Riedel Website or contact your local distributor or the Riedel headquarters

in Wuppertal.

NOTICE

This manual, as well as the software and any examples contained herein are provided “as is” and are subject to change

without notice. The content of this manual is for informational purpose only and should not be construed as a

commitment by Riedel Communications GmbH & Co. KG & Co. KG or its suppliers. Riedel Communications GmbH & Co.

KG & Co. KG gives no warranty of any kind with regard to this manual or the software, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose. Riedel Communications GmbH & Co. KG &

Co. KG shall not be liable for any errors, inaccuracies or for incidental or consequential damages in connection with the

furnishing, performance or use of this manual, the software or the examples herein. Riedel Communications GmbH &

Co. KG & Co. KG reserves all patent, proprietary design, title and intellectual property rights contained herein, including,

but not limited to, any images, text, photographs incorporated into the manual or software.

All title and intellectual property rights in and to the content that is accessed through use of the products is the

property of the respective owner and may be protected by applicable copyright or other intellectual property laws and

treaties.

03-301HB01EG-A00

Bolero Antenna Quick Start Guide

Reproduction, adaptation, or translation of this manual in whole or in part is prohibited without prior written

permission of Riedel Communications GmbH & Co. KG, except as allowed under the copyright laws.

All other trademarks are the property of their respective owner.

DRAFT

Bolero Antenna Quick Start Guide A00

1.1 Information

Symbols

The following tables are used to indicate hazards and provide cautionary information in relation to the

handling and use of the equipment.

Danger

Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury.

The highlighted line indicates the activity to prevent the danger.

Warning

Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

The highlighted line indicates the activity to prevent the danger.

Caution

Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate injury. It may also be used to alert against unsafe practices.

The highlighted line indicates the activity to prevent the danger.

This text is for generally information. It indicates the activity for ease of work or for better

understanding.

Service

·All service has to be undertaken ONLY by qualified service personnel.

·There are no user serviceable parts inside the devices.

·Do not plug in, turn in or attempt to operate an obviously damaged device.

·Never attempt to modify the equipment components for any reason.

Caution

All adjustments have been done at the factory before the shipment of the devices.

No maintenance is required and no user serviceable parts are inside the module.

DRAFT

Bolero Antenna Quick Start Guide A00

Voltage

·The power cable should only be connected to a correctly grounded source.

·Do not use any adapters.

·Never bypass a ground contact.

Danger

To reduce the risk of electric shock do not remove cover or expose the products to

rain or moisture.

Warning

Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.

Apparatet må tilkoples jordet stikkontakt.

Apparaten skall anslutas till jordat uttag.

Environment

·Never place the devices in an area of high dust particles or humidity.

·Never expose the device to any liquids.

·If the devices have been exposed to a cold environment and transferred to a warm environment,

condensation may form inside the housing. Wait at least 2 hours before applying any power to the

devices.

Declaration of Conformity

The devices conforms to the EU guidelines

EMV (EMC) 2014/30/EU

NSR (LVD) 2014/35/EU

RTTE (RED) 2014/53/EU

as attested by the CE mark.

FCC IDs:

·YFJANT101019 (Bolero DECT Antenna / BL-ANT-1010-19)

·YFJBPK100619 (Bolero Wireless Beltpack / BL-BPK-1006-19)

Industry Canada ICs:

·8706A-ANT101019 (Bolero DECT Antenna / BL-ANT-1010-19)

·8706A-BPK100619 (Bolero Wireless Beltpack / BL-BPK-1006-19)

Standards:

·EN 300 328 V1.9.1 / ETSI EN 300 328 V2.0.20

·EN 300 330 V1.8.1 / ETSI EN 300 330V2.1.0

·EN 301 406 V2.2.1

·EN 301 489-1/-3/-6/-17, EN 55022, EN 55024

·IEC/EN 60950-1/-22

·ARIB STD-T66

·ARIB STD-T101

DRAFT

Bolero Antenna Quick Start Guide A00

Disposal

Disposal of old Electrical & Electric Equipment (Applicable throughout the European Union and other

European countries with separate collection programs)

This symbol, found on your product or on its packaging, indicates that this product should

not be treated as household waste when you wish to dispose of it. Instead, it should be

handed over to an applicable collection point for the recycling of electrical and electronic

equipment. By ensuring this product is disposed of correctly, you will help prevent

potential negative consequences to the environment and human health, which could

otherwise be caused by inappropriate disposal of this product. The recycling of materials

will help to conserve natural resources. For more detailed information about the recycling

of this product please contact your local city office.

DRAFT

Bolero Antenna Quick Start Guide A00

1.2 About Bolero

Bolero Wireless Intercom

The Riedel Bolero Wireless Intercom system is a digital, easy to use full-duplex communications solution for broadcast,

security, industrial and theater applications as well as for sports and cultural events.

Bolero takes a completely new approach to wireless communications, pushing it beyond the limits of existing wireless

intercom solutions.

Riedel's Bolero Wireless Intercom solution utilizes the benefits of the Digital Enhanced Cordless Telecommunications

(DECT) standard’s base layer. This provides a license-free, cellular architecture with seamless hand-over between cells,

allowing each Bolero Wireless Beltpack to continuously monitor and automatically select the best connection to the

Antenna. The audio transmission takes place directly via the antennas. There is no need for additional devices.

Light and powerful custom lithium rechargeable battery packs are used for the Beltpack and the Antenna to provide

UPS power. Battery packs are able to charge inside the Beltpack, the Antenna as well as separately in the charger.

What is Bolero?

·Digital Wireless Intercom System

·based on the DECT standard

Riedel Bolero - Key Features

·Wireless Partyline and point-to-point

communications

·4 Wireless Partylines

·Cellular architecture with seamless hand-over

·Up to10 individually addressable Wireless Beltpacks

can be connected at the same time at one Antenna

·Excellent audio quality via VoIP-over-DECT

technology (license-free worldwide)

·Connection of antennas via existing Ethernet

infrastructure (PoE)

·No interference with radio microphones, In Ear

Monitoring (IEM) or other UHF systems

DRAFT

Bolero Antenna Quick Start Guide A00

2Bolero Antenna

The Bolero Antennas are connected together via Ethernet, allowing the use of existing standard structured cabling and

providing a wide area between the Antennas. The Antenna is powered via Power-over-Ethernet (PoE), simplifying

installations by eliminating local power supplies. Light and powerful custom lithium rechargeable battery packs are

used in the Antenna to provide UPS power. The battery packs are charged during normal operation. The Bolero Cell

Antenna has a range of approx. 330 feet (100 meters) under line-of-sight conditions or approx.165 feet (50 meters)

indoors.

2.1 Operating Elements

Figure 1: Antenna (front, bottom)

Display

Navigation buttons (cursor and menu button)

NFC contact point

Power supply connector (XLR-4)

Mounting element (TV spigot, 3/8 & 5/8 microphone stand mounting)

AES67 Network connector (RJ45)

ULLI*1 connector 1 (RJ45)

ULLI*1 connector 2 (RJ45)

USB connector (USB Type-C)

*1 (Ultra Low Latency Interface)

DRAFT

Bolero Antenna Quick Start Guide A00

XLR-4 (male)

Power Supply

-PWR

Chassis

+PWR (10...57 VDC / 3 A)

Figure 2: XLR-4 male

RJ45

1 8

AES67/Config

ULLI (LINK 1+2)

+PWR

-PWR

+PWR

-PWR

Figure 3: RJ45

USB Typ-C

A1 A12

B12 B1

GND

Dn1

SSTXp1

SBU1

SSTXn1

VBUS

SSRXn2

CC1

SSRXp2

Dp1

GND

Abbildung 4: USB Type-C

The USB connector is used for the firmware update.

DRAFT

Autres manuels pour Bolero

Table des matières

Manuels Antenne populaires d'autres marques

Alfa Network

Alfa Network APA-L01 Manuel utilisateur

Naval

Naval PR-422CA Manuel utilisateur

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur

TERK Technologies

TERK Technologies TV44 Manuel utilisateur

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur

HP J8999A Manuel utilisateur

MobilSat

MobilSat MSP-S Manuel utilisateur

Steren

Steren ANT-UHF 13 Manuel utilisateur

Novatel

Novatel 600-G Manuel d'utilisation

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuel utilisateur

TRENDnet

TRENDnet TEW-AO12O Manuel utilisateur

Radio Shack

Radio Shack 15-1837 Manuel utilisateur

CommScope

CommScope CMAX-OMFX-43M-I53 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics DAP25 Manuel utilisateur

COBHAM

COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien

Trango Systems

Trango Systems AD900-9 Manuel utilisateur

Steren

Steren ANT-100 Manuel utilisateur

Proxim

Proxim 5054-PA-23 Manuel utilisateur