Rico FP-101 Manuel utilisateur

700 Watts

15 minutes.

2.3 Litre

2 Litre

1.2 Litre

½ Litre

Size

1250 ml.

1500 ml.

1000 ml.

300 ml.

Usable Capacity

Dealers List after Sales Service

(3,000 RPM to 5,000 RPM approx).

(11,000 RPM to 18,000 RPM approx).

Warranty Card19. ... Back

Cover

2.3 Litre (1.2 Litre liquids) and is used

There are 2 feeder tubes that can be used

depending on the size of vegetable being

processed.

P l a c e t h e

cover, lock it clockwise direction.

Chopper Blade

While slicing we get thick

The drive shaft has to be placed in the

bowl, over which the disc blade holder

is placed. It is used only for positioning

of disc blade holder.

slices by putting extra pressure on this

pusher.

(Stem)

This jar is used for small quantity grinding

such as chutney, pepper, masalas, coffee

beans etc. It has a fixed blade with a plastic

dome cover

Slicing Blade

The Slicing Blade is use to slice

vegetable evenly. this blade is ideal for

slicing carrot, cucumber & potato and

is generally used to make beautiful

looking salads.

Thick Shredding Blade

This blade is used to shred vegetables

in to thick shreds which is ideal for

salads.

It is suitable for liquidising,

Blending and Mixing Foods.

13. Thin Shredding Blade

This blade is used to grate / shred

vegetables in to thin shreds which is

ideal for halwa & mithais.

14. Liquidiser Jar

15.

16.

17.

18.

foods like cake

It comes with a universal fixed blade

suitable for wet and dry grinding.

19. Centrifugal Juicer Attachment

The centrifugal juicer is fixed on the food processing bowl. This juicer

is used to extract juice from hard fruits & vegetables such as carrots,

karela, apples etc.

a) Cover With Pusher

It is used to introduce the fruits into

the centrifugal juicer.

b) Juicer Net

It is used to strain the juice from the

pulp.

c) Juicer Blade

It performs the function of extracting

juice from hard fruits & vegetables.

It contains the following parts :-

CONNECTIONS

For Users Within India

The Food Processor works on 240V AC, 50 Hz and is equipped with

a 5 amps., three-pin plug. Make sure the wall socket you use

in your domestic power supply is also equipped with a three-pin

socket.

WARNING : THIS APPLIANCE MUST BE EARTHED

Important

The wires in the mains lead are coloured in accordance with the

following code. :

Green : Earth

Black : Neutral (N)

Red : Live ( L)

For Users Outside India

WORKING ON LOCAL DOMESTIC POWER SUPPLY 220-240V

AC, 50 Hz.

Important

As the colours of the wires in the mains lead of this appliance may

not correspond with the coloured markings identifying the terminals

in your plug, proceed as follows :

The wire which is coloured green must be connected to the terminal

in the plug which is marked with the letter 'E' or by the earth

symbol or coloured green or green-and-yellow.

The wire which is coloured black must be connected to the terminal

which is marked with the letter 'N' or coloured black.

The wire which is coloured red must be connected to the terminal

which is marked with the letter 'L' or coloured red.

( )

HOW TO ASSEMBLE & OPERATE YOUR FOOD PROCESSOR

1. Hold the bowl by the handle & lower it on

the food processor side of the unit. Turn the bowl

in an clockwise direction till the bowl locks in

place. Please ensure that the lug of the bowl

precisely fits into the slot on the grinder unit.

2. Select the blade accessory as required. Fit the

blade in blade holder, by pressing the required

blade into the blade holder disc. Put the blade

holder on the stem. Then Place the stem in the

processor Bowl.

3. Cover the food processor bowl with the bowl

cover. Turn the cover in a clockwise

direction, to lock with the “click” sound. Please

ensure that the bowl cover fits perfectly into the

slot provided on the grinder unit. If it is not

fitted properly the safety switch will not come on

and food processor will not start.

4. Place the safety cover of the mixer portion on

the grinder unit & lock it in clockwise direction.

This will activate another safety switch. If not

properly locked the switch will not function &

the motor will not start.

5. Plug in the food processor to a wall AC outlet

socket. Your food processor is now ready for use.

6. To open the food processor bowl, press the

locking button on top of the food processor

near the safety cover and turn the bowl cover

in a anticlock wise direction. Disassemble in the

reverse away as shown above.

Select the jar you want to use.

1. Fill the jar up to the blade level for mini

-mum quantity of grinding. Cover the jar

with the dome.

2. Place the jar in the top casing of the

grinder unit on the mixer side. Ensure that

the locking wedge provided at the base of

the jar fits snugly in the groove provided in

3. Lock the jar in place by turning it in a

clockwise direction. This will activate the

the top casing.

second safety switch of the mixer.

4. Fix the food processor bowl and cover as shown in the steps above. Do

not put any blades/discs or any attachments on the food processor side.

Ensure that the safety switch is activated on the food processor side by

locking the cover of the food processor bowl in the clockwise direction.

5. With both the grinder jar and food processor bowl locked in place,

switch on the grinder unit, first at low speed gradually increasing to the

speed required for the operation.

Grinding Jar & Chutney Jar

Before grinding all ingredients must be

thoroughly dried and if necessary, should

be put in the oven for a short while so

that all the moisture gets evaporated.

The jar should be filled at least up to blade level. For larger quantities of

dry grinding the jar should not be filled more than 3/4th of its capacity.

HOW TO ASSEMBLE & OPERATE YOUR MIXER GRINDER

8 9

Disc Blade Assembly

S.S. Blade Assembly

HOW TO ASSEMBLE & OPERATE

YOUR CITRUS JUICER

This state of the art citrus juicer has

been especially designed to facilitate a

simple & easy way to maximum juice

extraction. The gear train has been

made keeping in mind the safety of the

user as well as the speed which ensures

splash free operation.

Place the bowl on the lugs &

move it clockwise. See that the

handle & motor are in the same

alignment. Move it anticlockwise

to unlock.

See that the container is locked

over appropriate slots on the unit.

Place the geared drive shaft on the food processor side fitting it

properly on the main shaft in the bowl.

The juicer now has to be placed on the drive shaft & bowl.

Fit the juicer on the bowl & turn it clockwise.

Once the juicer is fitted & moved clockwise it activates the toggle

switch, engaging the juicing cone.

Now switch on the machine, place the cut fruit on the cone,

applying moderate pressure till all the juice is extracted.

Use the citrus juicer on low speed only.

Note : For quick fresh fruit juice, cut the fruit horizontally & keep

ready before starting the unit.

How to assemble & use the citrus juicer

Wet Grinding

Note : While doing tough wet grinding, air bubbles may go inside the

paste and the blade will rotate empty. Indication is that the noise will be

heavy. When it is so, immediately stop the mixer, stir the paste with the

spatula and start again.

Soak material to be ground in water for 1½ to 2 hours. Drain water

Fill material slightly above the blade level and run the mixer at low

completely.

speed for 1½ to 2 minutes, till it becomes a fine paste.

Soak the material for 2 to 3 hours. If you want to grind parboiled

Now run the mixer at low speed. While the mixer is on, add water

gradually till the paste becomes uniformly fine. Stop and stir in

between to allow trapped air bubbles to escape and to allow

circulation. It will take 2-3 minutes to grind dal/rice. To grind

rice, soak it for 6 to 8 hours. Drain water completely.

Add the soaked material to fill ¾ of the jar.

parboiled rice it may even take 5-6 minutes.

To Grind Large Quantities With Liquid

For fine grinding, grind the material & sieve the ground substance

through a fine nylon sieve to the consistency required. The left-overs can

then be put in the mixer, re-ground and then sieved again.

While grinding hard substances like turmeric (haldi), please ensure that

the pieces are approximately 1/4th inch in size and well pounded before

putting in the jar for grinding.

10 11

Caution: - The Blades are very sharp , you may cut your fingers.

Operate with extreme caution.

Assemble the citrus juicer unit as shown above. Instead of placing the citrus

cone, replace it with the coconut scrapper blade. Operate the food processor

on whip position momentarily, to see if the blade has fit in place. Place the

coconut on the blade and start the process of scrapping. Use the coconut

HOW TO USE COCONUT SCRAPPER

scrapper on low speed only.

HOW TO ASSEMBLE & OPERATE

YOUR CENTRIFUGAL JUICER

Place the food processor bowl on

F i x t h e J u i c e r N e t i n t h e

Put the Centrifugal bowl on the

Run the food processor on whip

position for a second to see if it

is fitted fine. You may now run

Introduce the vegetable/fruit to

be juiced through the feeder tube

and push down with the juicer

pusher. The juice will collect in

the bowl w hereas t he pulp

accumulates in the juicer body

along with the walls of the

strainer. After sufficient pulp

the grinder unit.

juicer cover.

has been collected, stop the juicer,

remove the pulp and restart the

juicer again.

CIRCUIT BREAKER

(OVERLOAD RELAY FOR MOTOR PROTECTION)

WHIPPER / PULSE TECHNIQUE / INCHER

Operations like chopping & mincing sometimes need better consistency. To

agitate the food that is being processed in the food processor processing is

done in short bursts in lieu off continuous motion. This is achieved by

using the whipper speed by switching the machine on/off, this technique is

known as pulse technique.

We have provided a Circuit Breaker (CB) in

Many times, without realising, people tend to

overload the food processor, by putting more

material in the jar than recommended. This

results in the motor getting overloaded and

eventually burning out. In order to protect

your food processor from burning out, we

have provided a special overload relay known

This circuit breaker works just like the

In case, unintentionally, you overload the

machine and try to run it, the circuit breaker

will trip automatically, clearly cutting off the

electric supply, to the motor and switching off

the food processor, thereby protecting the

In case this event occurs, switch off the

machine, and allow the machine to cool for

2-3 minutes. Also reduce the material in the jar.

After 2-3 minutes, press in the button of the

Circuit Breaker (which is at the bottom of the

machine). Now switch on and restart the

your food processor.

as a circuit breaker.

common fuse in your house.

motor.

machine.

In this way, the Circuit Breaker protects your motor from burning out and

saves you from incurring any repairing cost.

CIRCUIT BRAKER

RED-TIP

PIN-ROD

NORMAL POSITION

PIN-ROD

HAS COME OUT

EXECESSIVE

CUT OFF

POSITION

PUSH

PIN-ROD

UPWARD

TO RE-SET

12 13

Centrifugal Juicer bowl.

drvie shaft.

CLEANING & MAINTENANCE OF

YOUR FOOD PROCESSOR.

HOW TO PERFORM VARIOUS FUNCTIONS

WITH YOUR FOOD PROCESSOR.

Cleaning of the Bowl

lUnplug the appliance from the power supply.

lRemove the bowl cover and bowl from the food processor.

lWash with luke warm soap water and scrub gently with a soft sponge.

lDo not use a metal or nylon brush for scrubbing.

Cleaning of jars

lAfter using the food processor jars, pour some soap water in the jar and

run for a short while.

lRemove the jar and wash the inside with clean water.

lRun the jar without any contents for 2-3 seconds only.

lNow keep the jar inverted to dry.

Cleaning the grinder unit

lWipe it with a soft clean cloth & keep aside.

Cleaning the blades

lRemove the blades carefully. Clean the blades in running water.

lDry the blades before storing.

lIt is advisable to apply oil on the stainless steel cutting blades when the

appliance is stored for a long duration.

Cleaning of Citrus & Centrifugal Juicer

lUnlock & remove the strainer. Remove the pulp into a garbage bin.

lWash the blade & strainer under running water. Dry well before

storing.

How to Knead (Dough)

Place the plastic blade & then place the flour to be kneaded in the bowl.

Start the machine & through the feeder tube add water. Start with less

water & keep adding, as too much water may make the dough stick. Let the

dough form into a ball & let it move approx. 25 times around the bowl so

that it becomes soft & smooth. Even dough of pizza bases, pastries can be

made.

Tip : Water should be less than ½ the quantity of atta (dough).

eg : If 2 full measuring tumbler of dough are taken ¾ measuring tumbler

of water should be added.

14 15

How to Crumb (Bread)

Position the S. S. Blade in the bowl. Cut the bread into pieces. You can use

fresh or dry bread. Continue processing until crumbs of desired quantity

are not formed. Biscuits, nuts, chocolate etc. can also be crumbed in the

same way.

How to Wet Grind (Dals)

The dal should be soaked overnight. Put the dal in the grinding jar. First use

the pulse technique & then run it continuously till desired smoothness is

achieved for better results. Similarly dosa, idli, vada mixes & chutneys can

How to Chop (Onions)

First peel & quarter the onions, position the S. S. Blade & then put the

onions. Use the pulse technique to chop the onions. As short bursts of

movements stir the food, chopped results obtained are more even. In this

same way all hard vegetables are chopped. Small items can be dropped

through the feeder tube while the machine is running. The load should be

medium for optimum results.

How to Make Potato Chips (French Fries)

Start with peeling of potatoes, then flatten the end surfaces by cutting thin

slices. Place the chipping disc. Put the potatoes vertically through the

feeder tube so that the flat end rests on the disc. Using the pusher apply

pressure throughout. Place the potatoes horizontally for longer chips.

Other vegetables & fruits can also be done in the same way for salads &

garnishing.

be ground.

How To Crush (Ice)

To crush ice use the S. S. Blade. Put the ice cubes through the feeder tube.

Start the machine. After processing is stopped if one or two large pieces of

ice remain, discard them. Hard & frozen cheese can also be grated in the

same way. In this process it is not unusual for the machine to move so do

not place it on the edge of the counter.

Whipping (Thick Coffee Shake)

This operation is performed with the help of the whipping blade. One tea

spoon of coffee, two tea spoon sugar, ¼ cup water. Run the food processor

for 30 seconds and the thick coffee paste is ready. Serve with hot milk.

For Cold Coffee - add coffee & crushed ice & run the food processor for

30 seconds. You will get thick cold coffee paste. Serve with sweetened

milk.

How to Whisk Eggs

The Whipping blade is an excellent attachment for whisking. It beats the

egg white & makes it very thick. However, the bowl & whipping blade

Tip : For best results use fresh eggs or bring the refrigerated eggs to the

room temperature before beating.

Method :

Pour the egg white in the bowl.

Run the machine for a few seconds. A thick frothy mixture will be

formed.

Add the egg yolk & beat for a few seconds.

How to Thick Shred (Beetroot)

Place the shredding blade in the bowl. Cut beetroot & put it through the

feeder tube. Start the processor & push the beetroot down. The shredded

beetroot can be used in salads. Coconut & cheese can also be shredded in

the same manner.

How to Slice (Cucumbers)

To start with, position the slicing blade in the bowl. Put the cucumber in the

feeder tube. Start the machine, apply light pressure for thinner slices.

Carrots, brinjals, boiled eggs etc. can be sliced also. Tip : Seeds & cores

must be removed before putting the fruit into the feeder tube.

How to Julienne (Carrots)

Peel & cut carrots & place the shredding blade in the bowl. Place the carrots

in the feeder tube. Start the machine. Capsicum, cucumber can also be

julienned similarly.

How to Mince (Meat)

For mincing, place the S. S. Blade in the bowl. Leave some fat on the meat

for moistness. Run the machine. For kababs you can use the pulse technique

also.

How to Mash (Potatoes)

Use the S. S. Blade. Boil the potatoes & cut into cubes while still hot. Place

in the machine & run. Tip : Potatoes should be mashed hot to avoid them

from becoming pasty.

How to Puree (Tomatoes)

Place the S. S. Blade in the bowl. Cut tomatoes & place in the bowl. Run

the machine continuously till desired consistency is achieved. Baby food &

other soft vegetables & fruits can be pureed too. Hard vegetables need to be

first boiled & then pureed for soups.

16 17

How to Thin Shred (Carrots)

Fix the thin shredding in blade holder. Place the blade holder in the bowl

put the carrots through the feeder tube. start the processor push the carrots

down the shredded carrot can be used in salads.

must be completely dry before use.

GENERAL OPERATING PRECAUTIONS

Before switching on, please make sure that the appliance is connected to

a 3 pin, 240 Volts, 5 Amp. AC socket.

Do not use wet hands while operating the appliance.

Do not immerse the base/motor unit plug or cord in water or any

other liquid.

To protect against electrical hazards do not use outdoors or on wet

surface.

Do not insert your finger, knife or spoon in the juice container or

grinder or pusher slot while in operation. It is dangerous. Be sure to

turn switch to off position after each use. Wait until the juicing /

cutting / mixing attachments come to a full stop, before removing the

cover or inserting the spatula spoon or removing the attachment.

Do not overtax the motor with heavy loads. If after loading the machine

& switching on the motor, it does not start or it runs at a very low

speed, check if the material filled is too much. If so, reduce the material

& proceed again. Heavier the substance less it should be filled.

Switch off the motor, if it stalls or smoke emanates from the motor.

dropped or damaged in any manner.

Do not operate your appliance with a damaged cord or after it has been

Wash the attachments thoroughly after use.

18 19

Before using, put the machine on a strong table board and operate as per the

instructions given in this manual only.

Before operating the food processor, always switch on the food processor momentarily

(for one or two seconds) to see if everything is in place and it is running smoothly.

Do not open the cover while processing. If power supply is on, do not

put your hand or any other object into the feeder tube.

Switch off the machine; unplug the cord before cleaning and when not in use.

Please do not leave the Food Processor unattended while operating the machine.

After operation , first pull out the plug of power supply and then pour the food.

Do not keep the base unit on any cloth / paper while running it, as this

may stop the flow of air, from the bottom of the mixer to the motor,

resulting in overheating of the motor.

HANDY HINTS

The instruction manual must be carefully read before you start using

The machine should not be run unless the jar is in position. The lids &

Turmeric & other hard substances should be pounded well before

Sugar / Salt should not be over ground as it may over heat, melt & stick

Sometimes the jar may get heated up while dry grinding, but it has

the machine.

covers must also be put properly.

While grinding, ingredients should be dry for best results.

putting in the grinder jar or chutney attachment.

In some cases over grinding makes the powder sticky.

to the blades causing damage to the machine.

Use only one blade at a time.

nothing to do with the motor, so you need not worry.

Do get the Food Processor serviced from our authorised service centres

at least once a year - list enclosed separately.

Keep the Food Processor away from children.

The blades are sharp & must be handled with care. The blades should

be changed only after the machine is unplugged.

This Food Processor must not be used for other purposes than indicated in

this manual. It is not a commercial Food Processor and cannot be used for

commercial purposes.

Trouble Shooting Tips

If the machine is not operating.

Please Check

a) The food processor bowl is properly positioned.

b) The jar / safety cover is properly locked.

c) Auto cut off (circuit breaker) is in pressed position.

While running, the machine stops.

Please Check

The jar is leaking from the gasket / dome.

Take out the gasket, wipe it with a dry cloth. Wipe the dome also with

a dry cloth (especially the area where the gasket sits). Fit the gasket

again and retry the grinding.

There is a burning smell from the machine.

Do not use it, take it to the nearest authorised service centre immediately.

Q3.

A3.

Q4.

A4.

The circuit breaker (refer to the circuit breaker portion in

the instruction manual).

The cord is plugged into the socket properly.

The food processor cover / the grinder safety knob - they

may have come lose.

Q1.

A1.

Q2.

A2.

Table des matières

Autres manuels Rico Robot culinaire

Rico

Rico FP-102 Manuel utilisateur

Manuels Robot culinaire populaires d'autres marques

INNOLIVING

INNOLIVING INN-727 Manuel utilisateur

Berkel

Berkel C32 Manuel utilisateur

Beko

Beko CHP5554W Manuel utilisateur

KitchenAid

KitchenAid 5KFP0719 Manuel utilisateur

QUIGG

QUIGG KM 2017Wi.20 Manuel utilisateur

Lakeland

Lakeland PRESS AND CHOP 31557 Manuel utilisateur

Bosch

Bosch MMR08 GB Series Manuel utilisateur

HOFFEN

HOFFEN Chef Express T9532 Manuel utilisateur

Garland

Garland 852 ZG Manuel utilisateur

Robot Coupe

Robot Coupe CL50 Gourmet Manuel utilisateur

SAPIRHOME

SAPIRHOME SP-1111-K Manuel utilisateur

Moulinex

Moulinex DJ3051 Manuel utilisateur

Bosch

Bosch MUM5 Manuel utilisateur

cecotec

cecotec Mambo Touch Manuel utilisateur

KitchenAid

KitchenAid 9KFC0516 Manuel utilisateur

Black & Decker

Black & Decker hc 300 Instructions d'installation

Gorenje

Gorenje SBR 1000 DV Manuel utilisateur

Arzum

Arzum AR 1128 Manuel utilisateur