Rich Bit TOP-016 Manuel utilisateur
Shenzhen Xinhuanan Bicycle Industry Co.,Ltd
Electric Bicycle
User Manual
Before The First Cycling,
Please Read This Manual For Security!
M
O
D
E
L
:
T
O
P
-
0
1
6
Model: TOP-016
Content
04
Electric Bicycle Components
05
Handlebar Installation
06
Wheel Installation
07
Pedal Installation
08
Saddle Installation
09
Plug-in Battery Disassembly and Charge Mode (direct charge)
11
Control operation instructions
12
Maintenance
13
After Sale Service
14
Quality Guarantee
10
Plug-in Battery Disassembly and Charge Mode (seating charge)
02
Warning
03
Safety Precautions
01 Electric Bicycle User Manual
Inspection Before Riding
1. Saddle seat post (whether it does not cross the limit line or is locked tight).
2. Bell (Does it ring well?)
3. Handle bar or Stem (Is it not over the limit line, is it locked tightly?)
4. Front and rear brakes (whether the work is normal, whether the wire is rusted, is the lever fixed?)
5. Fender (whether it hits the tire).
6. Battery(lights on or off).
7. Front brake and rear brake(If works well, sound good or not. ).
8.Spokes( no crack and no loose spokes).
9. Front and rear hub( check if fixed on the wheels).
10. Rear Carrier( check if tightened well).
11. Battery (If correctly installed and fixed).
12. Pedal crank (No rattling).
13. Chain (Do not idle, whether pebbles are not jammed, tooth skipping, play is appropriate).
14. Wheels (rattling, spokes, hub rattling, bending, no deformation or tire pressure is appropriate).
15. Motor (There is no loose attachment, does the chain rise and fall smoothly?).
Warning!
Inspection before riding should be carried out.
02 Electric Bicycle User Manual
Safety Precautions
1. Do not carry person on the back carrier.
2. Avoid the clothes too long to be caught by wheels abd belts.
3. Do not release the steering wheel except the signal.
4. Avoid clothes that are easily caught by wheels and belts.
5. Do not ride when you can see the limit line of a saddle or handle.
6. Use front and rear brakes and do not put your feet on the pedals when stop.
7. Do not ride the ebike in night,especially in night( check the battery condition
before your ride in night).
8. Do not ride when you are not feeling well such as drunk or taking medication...
9. Do not wear slippery shoes (such as sandals) or high-heeled shoes.
10. Do not use mobile phone when riding or stopping.
11. Wear earphone while cycling is not permitted in road traffic act.
03 Electric Bicycle User Manual
Grip
Saddle
Battery
Motor
Chain
Rear Derailleur
Fork
LCD display
Left indicator light
Brake lever-material: alloy aluminum
(It does not include asbestos.)
Front light
Alloy Aluminum rim
Tire
Hub
Disc Brake
Crank
Pedal
Brake Caliper
(Not including asbestos)
Right indicator light
Electric Bicycle Parts Introduction
04 Electric Bicycle User Manual
Handlebar Installation
Lift the handlebar from below to the figure (2).
Fold the folding handle to the buckle and lock the buckle(3).
Remove quick release of the tube cover and open the cover.
Place the handlebars in the slots, align them with the middle, close the
cover and fasten the handlebars.
03
0201
060504
05 Electric Bicycle User Manual
0201
03 04
Install the quick release parts in turn to the
front wheel.
Loosen the nut and put the front wheel in the
middle of the fork.
Slightly minor force launching, quitting fast
speed leisurely fitting, fitting before wheelchair,
finished inexpensive hard rocking, jumping one
piece swinging dynamic phenomenon.
For your safety, please check regularly to see if
the quick release is loosen, install the wrench in
the proper direction at 10 o'clock on the quick
release wrench.
Tyre Installation
06 Electric Bicycle User Manual
Saddle Installation
Open the clamp and place the seat post. Adjust the mat to a suitable height and snap
the seat post clamp until it does not shake.
01 02
07 Electric Bicycle User Manual
The pedal may tilt and slide during installation but it cannot be tried hard. It is necessary to find the
correct position and the installation can be done easily.
Before installation, you should observe
positions of the pedal (the bottom shows the
general position) L corresponds to the left as
Figure (3), and R corresponds to the right (1).
For pedal installation, please rotate and tighten
with a tool. Both sides of the pedal are in the
front direction.
01 02
03 04
L
R
Pedal Installation
08 Electric Bicycle User Manual
Open the jack protector and insert the jack directly into the hole.
When plug in the power, red indicator shows the start of charging. Green light indicates that charging
is completed.
02
03
Plug-in battery disassembly and charge mode
(direct charge).
09 Electric Bicycle User Manual
Table des matières
Autres manuels Rich Bit Vélo
