Rice Lake TP Series Manuel utilisateur
TP Series
Software Development Kit
Operation Manual
164106
Contents i
Contents
1.0 Introduction............................................................................... 1
1.1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Standard Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.0 Installation ................................................................................ 4
2.1 Setup and Checking of Functions . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Description of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2.1 Interface Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Input/Output Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3.1 Terminal Numbers and Functions . . . . . . . . . . . . . . . . . . . . . . 7
2.3.2 Connection Between Balances and Personal Computers . . . . 8
2.3.3 Interface Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3.4 Output Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3.5 Input Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TP Series Limited Warranty ................................................................ 13
© Rice Lake Weighing Systems. All rights reserved. Printed in the United States of America.
Specifications subject to change without notice.
Rice Lake Weighing Systems is an ISO 9001 registered company.
November 21, 2014
Technical training seminars are available through Rice Lake Weighing Systems.
Course descriptions and dates can be viewed at www.ricelake.com/training
or obtained by calling 715-234-9171 and asking for the training department.
ii TP Series
Rice Lake continually offers web-based video training on a growing selection
of product-related topics at no cost. Visit www.ricelake.com/webinars.
Introduction 1
1.0 Introduction
This is a precision instrument equipped with exacting mechanisms in a compact body.
The TP Series provides enhanced functions, including a counting mode for stock
control of parts, a percentage mode for comparative measurements given in
percentages, and a limit function for measuring constant quantities by consecutive
weighings. Despite its many functions, the balance is easy to operate and features
user-friendly keys. Furthermore, the large liquid-crystal display provides excellent
visibility, and the instrument’s high speed and stability (intrinsic to a tuning fork
design) help boost operational efficiency.
Moreover, balances with a built-in calibration weight can be calibrated by simply
turning the calibration knob.
1.1 Safety
Safety Symbol Definitions
Indicates an imminently hazardous situation that, if not
avoided, will result in death or serious injury.
Indicates a potentially hazardous situation that, if not
avoided could result in serious injury or death, and
includes hazards that are exposed when guards are
removed.
Indicates a potentially hazardous situation that, if not
avoided may result in minor or moderate injury.
Indicates a “mandatory” action that should be performed
without fail.
Indicates a "prohibited" action that must not be performed.
DANGER
WARNING
CAUTION
2 TP Series
General Safety
Do not operate or work on this equipment unless you
have read and understand the instructions and warnings
in this manual. Failure to follow the instructions or heed
the warnings could result in injury or death. Contact any
Rice Lake Weighing Systems dealer for replacement
manuals. Proper care is your responsibility.
Before attempting to operate this unit, make sure every individual who
operates or works with this unit has read and understands the following
safety information.
Failure to heed may result in serious injury or death.
DO NOT allow minors (children) or inexperienced persons to operate this
unit.
DO NOT operate without all shields and guards in place.
DO NOT jump on the scale.
DO NOT use for purposes other than weight taking.
DO NOT place fingers into slots or possible pinch points.
DO NOT use any load bearing component that is worn beyond 5% of the
original dimension.
DO NOT use this product if any of the components are cracked.
DO NOT exceed the rated load limit of the unit.
DO NOT make alterations or modifications to the unit.
DO NOT remove or obscure warning labels.
DO NOT use near water.
Before opening the unit, ensure the power cord is disconnected from the
outlet.
Keep hands, feet and loose clothing away from moving parts.
Use only AC power (rated value) and the dedicated AC adapter.
WARNING
Introduction 3
1.2 Standard Features
• External weight calibration
• Large 16.5 mm high liquid crystal backlit display
• Selectable modes: weight, unit, count and percentage
• 12 units of measurement
• Mono-Metal Tuning Fork Sensor (MMTS) provides quick response and stability
• 20-step bar graph display
• 115VAC adaptor included (230VAC optional)
• RS-232 bidirectional
• Plastic housing on models less than 1000g; plastic top and die cast housing on
models greater than 1000g
Part # Model # Description NTEP Resolution
108155 TP-420NT 420g x 0.001g (e=0.01g)
163604 TP-1200NT 1200g x 0.01g (e=0.1g)
108154 TP-4200NT 4200g x 0.01g (e=o.1g)
163606 TP-6200NT 6200g x 0.01g (e=0.1g)
Table 1-1. Part Number Information
4 TP Series
2.0 Installation
The following section contains information regarding the installation of the TP Series
balance.
2.1 Setup and Checking of Functions
1. Invoking the Function: press and hold down the Function Key until the
indicator displays “,” then release the key. The function setup mode is
activated and the first item, [ (Bar graph) 1] appears.
Figure 2-1. Invoking the Function
2. Selecting the next item: press the Function Key. The
indication changes to the next item, [ (Limit
function)].
3. Selecting an item: pressing the Function key advances
the function items at the rate of one item per press.
4. Changing the content of an item: select the item to be changed with the
Function key. Each press of the Zero/Tare key changes the last digit. Select
the desired digit.
Figure 2-4. Changing the Content of an Item
Figure 2-2. Selecting
the next item
Figure 2-3. Selecting
an item
Installation 5
5. Terminating the function selection: press the Ta rg et key. The balance
terminates the function setup and returns to measurement mode.
Figure 2-5. Terminating the Function Selection
2.2 Description of Functions
*: default factory settings [.] ~ []
** [] cannot be set at []
*** Not available on NTEP models
Setup of
measurement units
to be displayed **
Register
measurement units
by selecting
Function
.
(t1_Hong Kong)*
►Upper right
(t1_Singapore, Malaysia)***
►Lower right
(t1_Taiwan)*
[mom]
(to)***
*3 [Pcs]
*4 [%]
*5 Until not set
6 TP Series
2.2.1 Interface Section
Displayed when is set to or
* Denotes a factory-setting
** The data interval in continuous output mode is 0.1 to 1 second (the interval varies
depending on weighing conditions and other factors).
Item Set Value Description
Output
Control
Stop output.
Output continuous at all times.
Output continuous if stable (stops output if unstable).
Outputs once by pressing Memory (irrespective of
whether stable).
Outputs once, if stable. Outputs if the balance is stable
when a sample is loaded after the preceding sample has
been removed and the balance indicated zero, or less.
Outputs once if stable, and stops output when unstable.
Outputs once if stable, and outputs continuously when
unstable. Even if the sample is not replaced, output of the
balance stops when it stabilizes after being output once.
*Pressing Memory key causes the balance to output
once when stable.
Baud Rate
*1200 bps
2400 bps
4800 bps
9600 bps
Parity
*None Displayed only when [7. I.F. 2.]
(7-digit numeric format) is specified.
Odd
Even
Autres manuels pour TP Series
2
Ce manuel convient aux modèles suivants
8
Table des matières
Autres manuels Rice Lake Échelle
Rice Lake
Rice Lake RL-DBS-2 Manuel utilisateur
Rice Lake
Rice Lake BenchPro BP-P Manuel utilisateur
Rice Lake
Rice Lake MSI-4260 IS Manuel utilisateur
Rice Lake
Rice Lake 650-10-1 Manuel utilisateur
Rice Lake
Rice Lake RoughDeck CC Caster Cargo Manuel utilisateur
Rice Lake
Rice Lake Summit SB-1000 Manuel utilisateur
Rice Lake
Rice Lake QB Series Manuel utilisateur
Rice Lake
Rice Lake BenchMark Series Manuel utilisateur
Rice Lake
Rice Lake Benchmark LP Manuel utilisateur
Rice Lake
Rice Lake IQ6200 Manuel utilisateur
Rice Lake
Rice Lake RS-130 Manuel utilisateur
Rice Lake
Rice Lake Multiple Animal Scale Portable Supplément
Rice Lake
Rice Lake Versa-portion RLP-S Manuel utilisateur
Rice Lake
Rice Lake DeckHand Manuel
Rice Lake
Rice Lake 350-10 Series Manuel utilisateur
Rice Lake
Rice Lake 350-10-8S Manuel utilisateur
Rice Lake
Rice Lake RL-DBS Manuel utilisateur
Rice Lake
Rice Lake D300 Series Manuel utilisateur
Rice Lake
Rice Lake DHH-10BT Manuel utilisateur
Rice Lake
Rice Lake equipoise Manuel utilisateur
