Rice Lake IDIMENSION 200 Manuel utilisateur

iDimension 200

Workstation

Operation Manual

PN 167738 Rev A

Contents i

Contents

1.0 Introduction............................................................................... 1

1.1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.4 Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.0 Operation................................................................................... 5

2.1 Modes of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.1.1 Automatic versus Manual Operation . . . . . . . . . . . . . . . . . . . . 5

2.1.2 Operating With a Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.1.3 Operating iDimension 200 Without a Scale . . . . . . . . . . . . . . . 5

2.1.4 Operating iDimension 200 With a Manual Roller Conveyor. . . . 5

2.2 Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.3 Item Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.4 Zone of Interest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.5 Work Area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.6 Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.6.1 Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.6.2 Table Color/Scale Platen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.6.3 Scale Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.7 Irregular Shapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.0 Appendix ................................................................................. 11

3.1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.1.1 iDimension 200 is Not Responding . . . . . . . . . . . . . . . . . . . . 11

3.1.2 The Image is Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.1.3 Images Captured Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

3.1.4 Some Items Do Not Trigger Automatic Capture . . . . . . . . . . . 11

3.1.5 Bar Codes Are Not Being Read . . . . . . . . . . . . . . . . . . . . . . . 11

3.2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Regulatory Information ....................................................................... 14

iDimension 200 Limited Warranty ...................................................... 15

NOTES.................................................................................................. 16

Specifications subject to change without notice.

Rice Lake Weighing Systems is an ISO 9001 registered company.

April 27, 2015

Technical training seminars are available through Rice Lake Weighing Systems.

Course descriptions and dates can be viewed at www.ricelake.com/training

or obtained by calling 715-234-9171 and asking for the training department.

ii iDimension 200

Rice Lake continually offers web-based video training on a growing selection

of product-related topics at no cost. Visit www.ricelake.com/webinars.

Introduction 1

1.0 Introduction

Thank you for purchasing the iDimension 200. This document describes how to

operate the iDimension 200. Prior to using this unit, read this manual to ensure correct

use.

Manuals can be viewed or downloaded on the RiceLakeWeighing

Systems distributor site at www.ricelake.com.

Figure 1-1. iDimension 200

Scanning Head

Electrical Base

(Power/USB/

Ethernet Connections)

Base Plate

2iDimension 200

1.1 Safet y

Safety Symbol Definitions

Indicates an imminently hazardous situation that, if not avoided,

will result in death or serious injury.

Indicates a potentially hazardous situation that, if not avoided,

could result in serious injury or death, and includes hazards that

are exposed when guards are removed.

Indicates a potentially hazardous situation that, if not avoided,

may result in minor or moderate injury.

Indicates information about procedures that, if not observed,

could result in damage to equipment or corruption to and loss of

data.

Safety Precautions

Do not operate or work on this equipment unless you have read

and understand the instructions and warnings in this manual.

Contact any Rice Lake Weighing Systems dealer for

replacement manuals. Proper care is your responsibility.

General Safety

Failure to heed may result in serious injury or death.

Electric shock hazard!

• For pluggable equipment, the socket outlet must be installed near the

equipment and must be easily accessible.

• Always disconnect from main power before performing any work on the

device.

• Check the power cable for damage regularly and replace it immediately if it is

damaged.

• On the side of the device, maintain a clearance of at least 1.5'' in order to

prevent damage to the cable.

DO NOT allow minors (children) or inexperienced persons to operate this unit.

DO NOT operate without all shields and guards in place.

DO NOT place fingers into slots or possible pinch points.

DO NOT use this product if any of the components are cracked.

DO NOT make alterations or modifications to the unit.

DO NOT remove or obscure warning labels.

Keep hands, feet and loose clothing away from moving parts.

Do not use in hazardous areas!

Do not open the scanning head! The warranty and certification is void if this

stipulation is ignored. The device may only be opened by authorized persons.

DANGER

WARNING

CAUTION

Important

DANGER

Introduction 3

1.2 O v e r v i ew

Figure 1-2. Electrical Base

• Ethernet port

• Power indicator light

• Power (DC OUT) — 24V 1A

• Power (DC IN) — 24V 2.5A

• Three standard USB ports (Type A)

• One USB port (Type B)

• Host indicator light

• USB indicator light

iDimension 200 is functioning correctly when all three lights are on and green.

4iDimension 200

1.3 Accessories

1.4 Ca b l e s

If using a USB cable to connect to a PC, or if using a separate cable for DC OUT,

cables must be less than three meters long.

Part Description

Calibration Object

Ethernet Cable

Tools for assembling iDimension 200

Power Cord – US

Power is 110V/240 V but it may be

necessary to supply a different cord for a

specific country’s plug requirements.

Table 1-1. Accessories

Note

Operation 5

2.0 Operation

The iDimension 200 administrator will have configured the unit for the environment

it will be used in. As an operator, it is important to be aware of the following

concepts.

2.1 Modes of Operation

2.1.1 Automatic Versus Manual Operation

iDimension 200 is configured to run in Automatic or Manual mode. The unit’s

configuration will depend upon the requirements and implementation of a company’s

application.

Do not hold the package in position, or place hands in the scanning area.

The iDimension 200 may include the hand/arm as part of the dimensions.

Automatic Operation

When iDimension 200 is configured in Automatic mode, a scan of the item will start

after the system has detected that all motion has stopped under the scanning head.

When an item is placed on the scale or the base plate it can be re-positioned, but it

will not scan until all motion has stopped.

Manual Operation

When configured in manual mode, motion detection has been turned off. There may

be a button on the screen to select, which will start the scan, or a bar code scan may

initiate the scan.

2.1.2 Operating with a Scale

When operating with a scale interfaced directly to the iDimension 200, follow the

scale manufacturer’s instructions for proper operation of the scale.

• Set the scale unit to metric or imperial.

• Before placing an item, ensure the scale is zeroed and settled.

• After placing an item on the scale, the weight reading must settle.

2.1.3 Operating iDimension 200 without a Scale

• Flats are not supported

2.1.4 Operating iDimension 200 with a Manual Roller Conveyor

The unit is able to scan items while mounted over a roller conveyor per the following:

• The item must stop under the scanning head while iDimension 200 captures

dimensions, bar codes and images.

• Items should be positioned under the scanning head one at a time; be sure the

items are not too close together, or both items may be scanned incorrectly

together.

• It is recommended that items are spaced about 1.5-4'' apart; there should not be

more than one item in the zone of interest.

Note

6iDimension 200

Figure 2-1. Items on Roller Conveyor

2.2 Measurement

When reporting dimensions of an item, it defines length, width and height as follows:

• Length – the longer of the two horizontal measurements

• Width – the shorter of the two horizontal measurements

• Height – the vertical measurement

Figure 2-2. Object Measurements

2.3 Item Placement

When placing an item under the scanning head, do not worry about exact placement.

In general, place an item anywhere under the scanning head, straight or at an angle.

Best results will be obtained if the item is placed as centrally located as possible under

the scanning head.

The maximum size of an item to be dimensioned varies due to the camera’s field of

view.

The zone of interest is typically the size of the scale. Any item that is

not a least partially within the zone of interest will not be scanned.

Note

Table des matières

Autres manuels Rice Lake Caméra de documents

Rice Lake

Rice Lake IDIMENSION 20 Manuel utilisateur

Manuels Caméra de documents populaires d'autres marques

AVer

AVer AVerVision F35 Manuel utilisateur

Lumens

Lumens PS760 Manuel utilisateur

Genee World

Genee World GV8100 Manuel utilisateur

Touchboards

Touchboards Vidifox DV 480 Manuel utilisateur

Dukane

Dukane 210 Manuel utilisateur

TTS

TTS Easi-View Pro Manuel utilisateur

Lumens

Lumens dc153 Manuel utilisateur

Avermedia

Avermedia AVerVision SPB350 Manuel utilisateur

AVer

AVer TR311V2 Manuel utilisateur

Inswan

Inswan INS-3 Manuel utilisateur

Genee

Genee Vision 6100 Manuel utilisateur

Rolls

Rolls DB14 - 02/10 Manuel utilisateur

Lumens

Lumens DC-W80 Manuel utilisateur

AVer

AVer AVerVision SPB350+ Manuel utilisateur

Dukane

Dukane FASTFAX AV-P750U Manuel utilisateur

Optoma

Optoma DC554 Manuel utilisateur

Ipevo

Ipevo Ziggi Manuel utilisateur

Vidifox

Vidifox PV 380 Manuel utilisateur