Riccar SUMMER BREEZE RSBH-C Manuel utilisateur

Description of the vacuum

RSBH-O, RSBH-C, RSBH-SB

RSBHP-O & RSBHP-C

Owner’s Manual

IMPORTANT SAFETY INSTRUCTIONS .............................................................. 3

Safety Features .................................................................................................. 4

Polarization Instructions...................................................................................... 4

Benefits .............................................................................................................. 5

Description of the Zone Heater........................................................................... 6

Operation

Unpacking.......................................................................................................... 8

Turning the Power On......................................................................................... 8

Turning the Power Off......................................................................................... 9

Setting the Temperature ..................................................................................... 10

Setting the Clock and Day ................................................................................. 11

Backlight Function.............................................................................................. 12

Modes of Operation ........................................................................................... 13

Error Messages .................................................................................................. 15

Resetting the Circuit Breaker .............................................................................. 15

Maintenance and Care

Caring and Storing ............................................................................................. 16

Suggestions for Best Performance ..................................................................... 16

Filter Maintenance .............................................................................................. 17

Problem Solving Guide

Frequently Asked Questions............................................................................... 18

Troubleshooting.................................................................................................. 19

How to Contact your Authorized Retailer............................................................ 19

Visit Riccar On-line ............................................................................................. 19

Warranty ................................................................................................................. 20

Owner’s Warranty Information .......................................................................... 21

Contents

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including

the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS APPLIANCE

The manufacturer cannot accept responsibility for damage

caused when the appliance is not used according to the

instructions, or for uses other than those for which it

was intended.

To reduce the risk of fire, electric shock or injury:

• DO NOT plug the heater into any other cord

connected device such as a power strip, surge

protector, multiple outlet adapter, grounding

adapter, outlet-type air fresheners or extension

cords. Plug into a 3-prong, 120V 15 amp or

higher grounded circuit receptacle only.

• DO NOT plug the heater into a loose tting or

broken receptacle.

• DO NOT alter the heater’s design or you will

void the warranty.

• DO NOT block the front or rear of the heater.

• DO NOT place anything directly in front of the

heater.

• DO NOT cover the unit as this may block airow

and cause the heater to malfunction.

• DO NOT use the heater outdoors or in

construction sites.

• DO NOT force the lter to dry using any

alternative methods when performing lter

maintenance, doing so could damage the lter.

• DO NOT run the power cord under carpeting.

• DO NOT cover the power cord with throw rugs,

runners or similar coverings. Arrange the cord

away from trafc areas and where it will not be

tripped over.

• DO NOT insert or allow foreign objects to enter

any ventilation or exhaust opening as this may

cause an electric shock or re, or damage the

heater.

• DO NOT operate this heater with a damaged

cord or plug or after the heater malfunctions,

has been dropped or damaged in any

manner. Return heater to an authorized retailer

for examination, electrical or mechanical

adjustment or repair.

• DO NOT use this heater in areas where

gasoline, paint or ammable liquids are used or

stored. A heater has hot or arcing parts inside.

• This heater is hot when in use. To avoid burns,

do not let bare skin touch hot surfaces.

• Always unplug this heater when it is not in use.

To disconnect the heater, turn controls to off

then remove plug from the outlet.

• To prevent a possible re, do not block air

intakes or exhaust in any manner. Do not use

on soft surfaces, like a bed where openings

may become blocked.

• Keep combustible materials such as furniture,

pillows, bedding, clothes, curtains and paper

at least 3 feet from the front of the heater and

keep them away from the sides and the rear.

• Use this heater only as described in this

manual. Any other use not recommended by

the manufacturer may cause re, electrical

shock or injury to persons.

• Avoid the use of an extension cord because the

extension cord may overheat and cause a risk

of re.

• This heater is for use on 120 volt grounded

outlets. An adapter should not be used.

• This heater must be located near a socket

outlet.

• Extreme caution is necessary when any

heater is used by or near children or invalids

and whenever the heater is left operating and

unattended.

• This heater is not intended for use in

bathrooms, laundry areas and similar indoor

locations. Never locate the heater where it may

fall into a bathtub, shower, swimming pool or

other water container.

• Connect to properly grounded outlets only.

SAVE THESE INSTRUCTIONS.

WARNING:

Safety Features Beneﬁts

Energy Savings

• The Riccar SummerBreeze Zone Heater reduces energy usage and cost by allowing you to

set your central heating system to a lower temperature and use zone controlled heating to

only heat the area you’re occupying.

• The Riccar SummerBreeze Zone Heater uses a heating element with a finned design that

creates more internal surface area to be heated. As air passes over the element, it is more

effective at heating the air.

Ease to Use, Easy to Maintain

• The dial and programmable thermostats are easy to use.

• Minimal maintenance is required. Just vacuum or wash the filter and replace as needed.

• No bulbs to replace.

Comfort

The SummerBreeze Zone Heater by Riccar features a unique design that creates even heat

distribution – so your toes are as warm as your nose.

• High airflow allows uniform air distribution – something space heaters and radiant heaters

can’t do.

• Quiet operation adds to your room’s ambience.

Beauty

The Riccar SummerBreeze Zone Heater isn’t just functional, it’s also beautiful. The rich wood

finish blends in with your décor and complements your room.

• Made with a solid wood top and legs and veneer core hardwood panels.

• Requires only furniture polish or a quick dusting with a Riccar Microfiber Cloth to keep

its rich finish.

Polarization Instructions

This heater must be grounded. If it should

malfunction or break down, grounding provides

a path of least resistance for the electric current

to reduce the risk of electric shock. This heater

is equipped with a cord having an equipment-

grounding conductor and grounding plug.

The plug must be plugged into an appropriate

outlet that is properly installed and grounded in

accordance with all local codes and ordinances.

This heater is for use on a 120-volt circuit and has a ground plug

(see illustration). Make sure the heater is connected to an outlet having the same

conguration as the plug. No adapter should be used with this heater.

WARNING: Improper connection of the equipment-grounding conductor can result in

the risk of electric shock. Check with a qualied electrician or service person if you are in

doubt as to whether the outlet is properly grounded. Do not modify the plug provided with

the heater – if it will not t the outlet, have a proper outlet installed by a qualied electrician.

Safety Features

The Riccar SummerBreeze Heater has safeguards to protect the heater from overheating.

Here are a few ways the heater warms your home safely:

• Enclosed heating element prevents the heat from creating hot external areas.

• Thermal fuses shut the element off if dangerously high temperatures are reached.

• Tip-over switch shuts off the element if the heater is tilted. The power resets when the

heater is returned to operating position.

• Circuit breaker protects against potential electrical safety conditions.

Grounded

Outlet

Grounding

Grounded

Outlet Box

Description of the Zone HeaterDescription of the Zone Heater

1 Power On Indicator Light

2 Front Grill (exhaust)

3 Caster Wheels

4 On/Off Switch

5 Circuit Breaker Button

6 Filter (intake)

7 Dial Temperature Control

8 Programmable

Temperature Control

Front Side

Back Side

RSBH-O, RSBH-C

and RSBH-SB Models

Back Side

RSBHP-O and

RSBHP-C Models

•

F°

•

F°

Dial Thermostat

RSBH-O, RSBH-C

and RSBH-SB Models

Programmable Thermostat

RSBHP-O and

RSBHP-C Models

On/Standby switch

Appears when the

setpoint is displayed

Day and time settings

Percentage of

heating time

Program button

Program clear button

Mode selection/

Program exit

Time and day display

Temperature display

Mode Display

Preset temperature

indicator

Temperature control

mode indicator

Temperature preset

buttons

Period Display

Temperature

adjustment buttons

Backlight button

Operation

Unpacking Your SummerBreeze Zone Heater

• Cut open the taped edges, remove the

protective packaging materials and lift heater

from carton. Find a level location to place the

unpackaged heater.

• Keep the packaging for off-season storage and

any transporting needs.

• Plug the power cord directly into an unused,

grounded 120 volt, 15 amps or higher circuit

receptacle.

Turning the Power On

Dial Thermostat Models

• Press the on/off switch to On. An amber light

will display on the front of the unit indicating the

heater is plugged into an electrical outlet and

turned on.

• Turn the thermostat dial to set the desired

temperature.

• If the thermostat is set above the room’s

temperature the heater fan will begin to

operate after a few minutes.

On/Off Switch

Dial Thermostat

Programmable Thermostat

Operation

Turning the Power On

Programmable Thermostat Models

• Press the on/off switch on the back of the

heater to On. An amber light will display on

the front of the unit indicating the heater is

plugged into an electrical outlet and turned

on.

• Slide the on/standby switch on the

thermostat to On. It is not necessary to

ever set the thermostat to Standby because

the master on/off switch on the heater

controls the power to the heating element.

• Set the desired temperature using the up/

down temperature adjustment buttons.

See Setting the Temperature (page 10) for

complete instructions.

• If the thermostat is set above the room’s

temperature the heater fan will begin to

operate after a few minutes.

Turning the Power Off

All Models

• Press the on/off switch on the back of the

heater to Off.

•

F°

OperationOperation

Setting the Temperature

Dial Thermostat Models

• Turn the dial to the desired temperature.

• If the room’s temperature is below the

temperature selected on the thermostat

dial, the heater will turn on until the desired

temperature is reached.

• If the room’s temperature is above the

temperature selected on the thermostat dial,

the heater will not turn on. Once the room’s

temperature falls below the temperature

selected on the thermostat dial, the heater will

turn on.

Setting the Temperature

Programmable Thermostat Models

The thermostat normally displays the room’s

actual (measured) temperature.

• To view the setpoint, press one of the up/down

buttons once. The setpoint will appear for the

next 5 seconds.

• To change the setpoint, press one of the up/

down buttons until the desired temperature is

displayed. To scroll faster, press and hold the

button.

Dial Thermostat

•

F°

Programmable Thermostat

Setting the Clock and Day

Programmable Thermostat Models

• Press the Hour button to set the hour.

• Set the Min button to set the minutes.

• Set the Day button to set the day.

• Press Mode/Ret to exit.

Daylight Savings Time

The thermostat can automatically re-adjust its clock

at the Daylight Savings Time changeover. When this

function is enabled (On), the thermostat switches

to Daylight Savings Time on the second Sunday

of March and to normal time on the rst Sunday of

November.

NOTE: The function is disabled (default setting) when

the clock loses its setting.

• Press the Day button (3 seconds) until DLS appears

on the screen.

• Press the up/down button to toggle between On

(enabled) and Off (disabled).

• Press the Day button briey. The year setting is

displayed.

• Press the up/down button to set the current year.

• Press the Day button briey. The month setting is

displayed.

• Press the up/down button to set the current month.

• Press the Day button briey. The date setting is

displayed.

• Press the up/down button to set the current date.

• Press Mode/Ret to exit.

OperationOperation

Backlight

Programmable Thermostat Models

The display illuminates for 12 seconds when the

backlight button is pressed.

When either of the up/down buttons are pressed, the

display also illuminates for 12 seconds. The setpoint

temperature appears for 5 seconds, then the actual

(measured) temperature is displayed.

Temperature Adjustment

Programmable Thermostat Models

Setpoint Temperature

The thermostat has 3 preset temperatures:

• Comfort temperature

• Economy temperature

• Vacation temperature

To use a preset temperature, press the corresponding

button. The corresponding icon will be displayed.

Preset Temperatures

To store a preset temperature:

• Set the desired temperature using the

up/down buttons.

• Press and hold the corresponding button until the

corresponding icon is displayed.

Comfort

Economy

Vacation

Modes of Operation

Programmable Thermostat Models

Automatic Mode

The thermostat follows the programmed schedule. To

place the thermostat in this mode, press Mode/Ret

until is displayed. The data of the current schedule

period are also displayed.

Temporary Bypass

If you modify the setpoint temperature (by pressing the

up/down arrows, or button) when the thermostat is in

automatic mode, the new temperature will be used until

the beginning of the next period. flashes during the

bypass. You can cancel the bypass by pressing Mode/Ret.

Programmed Schedule

The schedule consists of 4 periods per day which

represents a typical week day. You can program the

thermostat to skip the periods that do not apply to your

situation. For example, you can skip periods 2 and 3 for

the weekend.

The Comfort ( ) temperature is used in periods 1 and 3

and the Economy ( ) temperature is used in periods 2

and 4. For example,when the period changes from 1 to 2,

the setpoint automatically changes from Comfort ( )

temperature to Economy ( ) temperature.

OperationOperation

Vacation Mode

In this mode, the thermostat is set to Vacation temperature. To

place the thermostat in Vacation mode:

• Press the button on the thermostat. When the Vacation mode

is activated using the button, the icon appears on the screen

without ashing.

Error Messages

The measured temperature is below

the thermostat’s display range. Heating is activated.

The measured temperature is above the

thermostat’s display range. Heating is deactivated.

Verify the thermostat connection.

Resetting the Circuit Breaker

This feature is a safeguard to recognize when

there is a potential electrical safety condition.

The circuit breaker will “trip” or pop out and

the heater will automatically power off if such

a situation occurs.

• Press the on/off switch to Off.

• Unplug the power cord.

• Push the circuit breaker button to reset.

• Plug the power cord directly into an unused,

grounded 120 volt, 15 amps or higher

circuit receptacle.

• Press the on/off switch to On.

• If the circuit breaker trips a second time, return

the heater to an Authorized Riccar Retailer.

Circuit Breaker

Programmed Schedule Continued

You can have a different program for each day of the week; i.e., each

period can start at a different time for each day of the week. The

thermostat has been programmed with the following schedule.

To modify the schedule:

• Press Pgm to access the programming mode. Period 1 is selected.

• Press Day to select the day to program (hold for 3 seconds to select

the entire week).

• Press Hour and Min to set the start time of the selected period, or

press Clear if you want to skip the period (--:-- is displayed). NOTE: If

you intend to use only 2 periods, set periods “1 and 4” or periods “2

and 3”. Early Start will not work if you set periods “1 and 2” or periods

“3 and 4” .

• Press Pgm to select another period, or press Day to select another

day. Then repeat step 3.

• Press Mode/Ret to exit the programming mode.

NOTE: If no button is pressed for 60 seconds, the thermostat will

automatically exit the programming mode.

Manual Mode

The programmed schedule is not used. The temperature must be set

manually. To place the thermostat in this mode:

• Press Mode/Ret until is displayed.

• Set the temperature using the up/down, or button.

Maintenance and Care Maintenance and Care

Filter Maintenance

The only maintenance required for this zone

heater is the periodic cleaning of the filter

(located at the back of the unit). Vacuum

or wash the filter at least once a month, or

as dust becomes visible to ensure efficient

operation of the heater.

• Turn the power off by pressing the on/off

switch on the back of the heater to Off.

• Unplug the power cord from the

electrical outlet.

• Remove the filter by gently pulling it

straight out from the back of the heater.

• Clean the filter by vacuuming it until all

dust and dirt is removed.

• Replace the filter by gently positioning it

into the back of the heater.

• If filter is extremely dirty, run warm tap

water over it until it is clean. Allow to dry

completely, before replacing the filter

back into the heater.

• Plug in the power cord and turn the

power switch on the back of the heater

to the on position.

Electrostatic Filter

•

F°

Caring For Your SummerBreeze Zone Heater Cabinet

Clean the filter often for maximum performance (see filter maintenance, page 11). When

necessary, wipe the cabinet clean with a soft cloth and/or furniture polish.

Storing Your SummerBreeze Zone Heater

When the heater is not being used for an extended period of time, follow these steps to

extend the life and performance of the heater unit:

• Unplug the heater.

• Cover the heater to prevent dust from accumulating on or inside the unit.

• Store heater in a dry, low dust environment.

Note: Before resuming use of heater, ensure the filter and front grill are clean and clear of

dust and dirt. Inspect the power cord to ensure no damage has compromised the integrity

of the cord.

Suggestions for Best Performance

• Set your central heating system to a lower temperature. Place the zone heater in the area

where you spend most of your time. Now set temperature on the zone heater to your

comfort level.

• When heating larger areas, place the zone heater in a central location.

• Do not locate the zone heater in an area with a high air exchange rate. Heat produced

should be contained in the room.

• Place the zone heater near a warmer inside wall and direct the output toward a cooler

outside wall. The cooler outside wall will draw the generated heat toward it, which

allows more efcient heating.

• Placing the zone heater next to a cold air return will draw the heat away from the area to

be heated. Experiment with the placement of the heater to see what works best

for you.

• If the zone heater is used in an extremely dirty or dusty area, the lter should be cleaned

more often to maintain the heater performance (see Filter Maintenance,

page 11).

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Riccar Chauffage

Riccar

Riccar RSBH-SB Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur