Rheem Integrity 20 Document technique

Owners

Guide

and

Installation

Instructions

This water heater must be installed and serviced by an authorised person.

Please leave this guide with the householder.

PATENTS

This water heater may be protected by one or more patents or registered designs in the

name of Rheem Australia Limited, Southcorp Australia Pty Ltd or Paloma Industries Ltd.

Southcorp Water Heaters Australia is the supplier of the Rheem integrity range of

electronic instantaneous gas water heaters, manufactured by Paloma Industries Ltd, a

world leader in water heater technology and manufacture.

CONTENTS

HOUSEHOLDER - We recommend you read pages 4 to 15.

The other pages are intended for the installer but may be of interest.

About your water heater...................................................... 4

Temperature control ............................................................ 7

Save a service call ............................................................. 14

Installation - Water heater ................................................. 16

Dimensions ......................................................................... 18

Connections - Plumbing .................................................... 19

Connections - Electrical .................................................... 19

Commissioning .................................................................. 20

Installation - Controllers .................................................... 22

Installation - Diagrams....................................................... 26

Water supplies.................................................................... 27

Warranty.............................................................................. 28

MODEL TYPE

Congratulations for choosing a Rheem integrity electronic instantaneous gas water heater.

The model you have chosen is for outdoor installation only. The water heater operates

automatically. When a hot tap is opened, the gas burners ignite to provide immediate

heating of the water. The gas burners extinguish when the hot tap is closed.

HOW HOT SHOULD THE WATER BE?

This type of water heater operates on the principle

of heating water as it passes through the water

heater. The outlet temperature is selected by the

user at the controller (if installed). If a controller is

not installed, the water heater defaults to the preset

outlet temperature. The temperature is then kept

constant by the automatic adjustment of the burner

input and water flow rate (refer to Temperature

Control on pages 7 to 13).

Note: The preset outlet temperature setting of

this water heater cannot be adjusted by the

householder. This setting can only be adjusted

by Southcorp Water Heaters Australia or their

Accredited Service Agent.

HOTTER WATER INCREASES THE RISK

OF SCALD INJURY

We recommend, and it may also be required by

regulations, that an approved temperature limiting

device be fitted into the hot water piping to the

bathroom and ensuite. This will keep the water

temperature below 50°C at the bathroom and

ensuite. The risk of scald injury will be reduced and, if a Kitchen controller is installed, still

allow hotter water to the kitchen and laundry.

TO TURN OFF THE WATER HEATER

If it is necessary to turn off the water heater, such as when going on vacation:

●

Turn off the water heater using the “on/off” button on the controller/s (if fitted).

●

Close the gas and water isolation valves at the inlets to the water heater.

●

If the water heater does not have frost protection, switch off the electrical supply at

the power outlet to the water heater.

Note: The electrical supply should not be switched off for models fitted with frost protection,

unless the water heater is drained. Otherwise damage could result from freezing conditions

(refer to Frost Protection and Draining the Water Heater on page 6 ).

ABOUT YOUR WATER HEATER

TO TURN ON THE WATER HEATER

If the water heater has been drained, screw in the drain plugs at the cold water inlet and

hot water outlet of the water heater and open all of the hot water taps in the house (don’t

forget the shower). Open the cold water isolation valve fully at the inlet to the water

heater. Air will be forced out of the hot taps. As water flows freely from each tap, close

it. Open the gas isolation valve fully at the inlet to the water heater, plug the water heater

power lead into the electrical outlet and switch on. Turn on the water heater at the controller

(if fitted). The water heater will then operate automatically when you open a hot tap.

GENERAL MAINTENANCE

The jacket of the water heater can be cleaned with a soft cloth and warm mild soapy water.

Under no circumstances should abrasive materials or powders be used. Ensure the water

heater flue terminal and air inlet are not obstructed in any way at any time.

The water heater should be serviced annually by Southcorp Water Heaters Australia or

their Accredited Service Agent. Only genuine replacement parts should be used with this

water heater.

SAFETY INSTRUCTIONS

Propane models are designed to operate on Propane

only. The use of Propane/Butane mixture such as

automotive LPG fuel is unsafe and can cause damage

to the water heater.

Do not store or use chemicals or flammable

materials near the water heater.

Do not spray aerosols near the water heater.

Do not place anything on top of or against the

water heater, or in contact with the flue terminal.

The flue gases and the flue terminal on the water

heater are hot when the water heater is operating.

Keep clear of this area to avoid burns.

ELECTRICAL POWER

The water heater uses 240 volt AC electrical power for operation of the control systems and

the combustion fan. The power lead from the water heater must be plugged into a

weatherproof electrical outlet. Take care not to touch the power plug with wet hands.

ABOUT YOUR WATER HEATER

FROST PROTECTION

The water heater may have frost protection. Refer to the rating label on the water heater.

The frost protection system will protect the water heater from damage, by preventing ice

forming in the waterways of the water heater, in the event of freezing occurring. Models

without frost protection are not covered under warranty for damage caused by freezing.

Notes:

●

If it is necessary to switch the power off to the water heater and there is a risk of

freezing, then it is necessary to drain the water heater (refer to Draining the

Water Heater on page 6).

●

The frost protection system will be rendered inoperable if electrical power is not

available at the water heater. Damage caused by freezing due to the unavailability

of power at the water heater, is not covered by warranty.

●

Pipe work to and from the water heater must be adequately insulated to prevent

freezing.

●

The water heater is not suitable for installation in areas where the ambient

temperature falls below -20ºC (including wind chill factor).

●

Refer to Warranty Exclusions on page 28.

DRAINING THE WATER HEATER

●

Turn off the water heater (refer to Turn Off the Water Heater on page 4).

●

Open a hot tap (preferably the shower outlet).

●

Unscrew the two drain plugs, one each at the cold water inlet and hot water outlet, on

the underside of the water heater. Water will drain from the water heater.

●

When water stops flowing from the water heater, close the hot tap.

Note: It is recommended not to screw the drain plugs back in, until the water heater

is to be turned on again.

ABOUT YOUR WATER HEATER

TEMPERATURE CONTROL

Rheem controllers enable the user to control the temperature of the delivered water

from the outlet of the water heater. There are three controllers suitable for installation

with this water heater. They are the Kitchen controller, Bathroom1 controller and

Bathroom2 controller. One, two or three controllers can be installed. A Bathroom2

controller can only be installed if a Bathroom1 controller is installed. Only one of

each type of controller can be connected to the water heater.

The temperature settings of each type of controller are:

Bathroom1 & 2 37oC to 46oC (in 1oC increments), 48oC, 50oC.

Kitchen 37oC to 46oC (in 1oC increments), 48oC, 50oC, 55oC, 60oC.

The installation of Bathroom controller/s only (ie. no Kitchen controller) limits the

outlet temperature of the water heater to a maximum of 50ºC, regardless of the

preset outlet temperature of the water heater. If Rheem controllers are not installed,

the water heater defaults to the preset outlet temperature. Other manufacturers’

controllers cannot be installed with this water heater.

TEMPERATURE ADJUSTMENT

●

A controller must be on and have priority to be able to adjust the temperature

setting.

●

The temperature adjustment is made by pressing the up (▲) button or down (▼)

button.

●

The maximum temperature setting for the Kitchen controller is 60oC and for the

Bathroom controllers is 50oC.

●

Each press of the up (▲) button will increase the temperature setting by one

increment.

●

Pressing the up (▲) button continuously will scroll the temperature setting up to

a maximum 43oC if hot water is flowing or 45oC if no hot water is flowing.

●

The temperature setting cannot be increased above 43oC whilst hot water is

flowing.

●

From the 45oC setting, the up (▲) button must be pressed once for each increase

in increment.

●

The minimum temperature setting for each type of controller is 37oC.

●

Each press of the down (▼) button will decrease the temperature setting by one

increment.

●

Pressing the down (▼) button continuously will scroll down the temperature setting.

●

The temperature setting can be decreased from any temperature setting whether

the hot water is flowing or not.

TEMPERATURE CONTROL

FUNCTIONS OF ALL CONTROLLERS

If one or more controllers are installed, at least one must be on for the water heater

to operate. If all controllers are off, the water heater will only deliver cold water.

on/off button – This button must be pressed once to turn on the controller. The

light in the button will glow when the controller is on. A controller

cannot be turned on if water is flowing from a hot tap. To turn off

a controller, press the on/off button once. The light will go out. A

controller can be turned off whilst water is flowing.

priority light – This light will glow on a controller when that controller has priority.

Priority means that controller has control of the water heater

temperature setting. The water temperature setting can only be

adjusted by the controller that has priority.

in use light – This light will glow on all controllers, whether they are on or off,

when hot water is flowing, regardless of which controller has

priority.

display panel – The current temperature setting is displayed on all controllers

(whether hot water is flowing or not), when any controller is on. If

all controllers are off, then the display remains blank. The water

volume can also be displayed on the Kitchen controller. The

x10lsymbol glows when the water volume is displayed.

▲(up button) – The up button increases the temperature setting (refer to

Temperature Adjustment on page 7).

▼(down button) –The down button decreases the temperature setting (refer to

Temperature Adjustment on page 7).

water volume button (Kitchen controller only) – This feature enables an alarm to

sound when a set volume of water has flowed through the water

heater (refer to Water Volume Function on page 12).

SILENCING A CONTROLLER

The controller emits a sound whenever a button is pressed. This sound can be

turned off to provide silent operation. To turn off the sound:

●

Press the on/off button, to deactivate the controller (on/off light is off).

●

Press and hold the up (▲) button.

●

Press the on/off button, whilst the up (▲) button is pressed.

The sound for the controller is deactivated. Repeat this procedure if you wish to

deactivate the sound on the other controllers. To restore the sound, repeat this

procedure.

TEMPERATURE CONTROL

BATHROOM CONTROLLER

KITCHEN CONTROLLER

The Kitchen controller allows the user to select the temperature setting for the hot

water to be used in the kitchen and laundry. It has a maximum temperature setting

of 60ºC and a minimum temperature setting of 37

C. The Kitchen controller does

not have priority if a Bathroom controller is on.

To operate the Kitchen controller:

1. Turn off the Bathroom controller/s.

If a temperature setting is displayed and the

priority light is not glowing, it is necessary to

turn off the Bathroom controller/s to gain

priority. See notes below.

2. Turn on the Kitchen controller by

pressing the on/off button.

The light in the on/off button and the priority

light will both glow. The Kitchen controller

temperature setting will be displayed. This

is the lower of the previous setting and 50°C.

3. Select the temperature setting by

pressing the up (▲) button or down

(▼

)

button.

Refer to Temperature Adjustment on page

7. The selected temperature setting will be

displayed on all controllers.

4. Open the hot tap.

The in use light will glow on all controllers.

5. Close the hot tap.

The in use light will go out on all controllers.

6. Turn off the Kitchen controller by

pressing the on/off button.

The priority light, on/off light and temperature

display will go out.

Important: Turn off the Kitchen controller after hot water usage is finished in the

kitchen and/or laundry. Refer to Important note for Bathroom controllers on page 11.

Notes on the Kitchen controller:

●

The Bathroom controller/s can be turned off from the Kitchen controller. Press

and hold the on/off button on the Kitchen controller for three seconds. This turns

off all the controllers and the displays go blank. If hot water is flowing from a hot

tap, it will go cold.

●

The controller cannot be turned on whilst a hot tap is open.

●

The Kitchen controller must have priority in order to adjust the temperature setting

on the Kitchen controller.

TEMPERATURE CONTROL

in use

off

priority

in use priority

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Rheem Chauffe-eau

Rheem

Rheem Ruud GT-199DVN-1 Manuel utilisateur

Rheem

Rheem 260 Litre Manuel utilisateur

Rheem

Rheem Solar Loline Water Heater Document technique

Rheem

Rheem RS120-64BP Manuel utilisateur

Rheem

Rheem PowerVent Commercial Gas Water Heater Manuel utilisateur

Rheem

Rheem MPi 554 Series Document technique

Rheem

Rheem RUUD High-Power Commercial Water Heater Manuel utilisateur

Rheem

Rheem Single and Double Element Models Manuel utilisateur

Rheem

Rheem 551180 Document technique

Rheem

Rheem CRTGH-95X Series Manuel utilisateur

Rheem

Rheem RTGH-95DVELN-3 Manuel utilisateur

Rheem

Rheem Richmond RMTGH-95DVLP Manuel utilisateur

Rheem

Rheem PVS 40-33(NAT) HA Manuel utilisateur

Rheem

Rheem GHE80SS Guide d'installation

Rheem

Rheem Universal Gas Manuel utilisateur

Rheem

Rheem Raypak B-195 Manuel utilisateur

Rheem

Rheem Gas Domestic Indoor Water Heater Mode d’emploi

Rheem

Rheem 596160 Document technique

Rheem

Rheem Xtreme GX90-550 Manuel utilisateur

Rheem

Rheem RT1000C6 Document technique

Rheem

Rheem RH-188 Series Manuel utilisateur

Rheem

Rheem 120 Volt Manuel utilisateur

Rheem

Rheem HB Duct Ready Series Manuel utilisateur

Rheem

Rheem II Series Mode d'emploi

Manuels Chauffe-eau populaires d'autres marques

Kenmore

Kenmore 153.582400 Manuel utilisateur

Applimo

Applimo Edel AIR Manuel utilisateur

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Manuel utilisateur

clage

clage E-Mini Series Manuel utilisateur

Toyotomi

Toyotomi Oil Miser OM-180 Manuel utilisateur

Bradford White

Bradford White EF Series Manuel utilisateur

Eccotemp

Eccotemp 40-H Manuel utilisateur

Dimplex

Dimplex ECSd125-580 Mode d’emploi

Dux

Dux 32FCR6N Manuel utilisateur

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Guide de dépannage

Noritz

Noritz N-132M Manuel d'instructions

TESY

TESY GCV7/4S 10047 Fiche technique

A.O. Smith

A.O. Smith Gphe 50 Manuel utilisateur

Koryo

Koryo KWHZF15Y Manuel utilisateur

Pentair

Pentair PSC-14-4-02 Manuel utilisateur

GE 40M06AAG Instructions de montage

Thermor

Thermor AEROMAX SPLIT 2 Manuel utilisateur

American Hometec

American Hometec AHQ-B03X Manuel utilisateur