RH FLATIRON Manuel utilisateur

Autres manuels RH Éclairage domestique

RH

RH HUSTON TASK FLOOR LAMP Manuel utilisateur

RH

RH RONAN Manuel utilisateur

RH

RH CANNELE TASK FLOOR LAMP Manuel utilisateur

RH

RH ORBITER II Manuel utilisateur

RH

RH FULCRUM Manuel utilisateur

RH

RH RIVOLI TORCHIERE Manuel utilisateur

RH

RH FRENCH COLUMN GLASS TABLE LAMP Manuel utilisateur

RH

RH ROBESON Manuel utilisateur

RH

RH 1940S Manuel utilisateur

RH

RH BRUTALIST CONSTRUCTIVIST TABLE LAMP Manuel utilisateur

RH

RH LISEUSE 1960S Manuel utilisateur

RH

RH KNOX TASK Manuel utilisateur

RH

RH 1950S Manuel utilisateur

RH

RH ARMAND FLOOR LAMP Manuel utilisateur

RH

RH HEXAGONAL CRYSTAL COLUMN FLOOR LAMP Manuel utilisateur

RH

RH CONVESSI GRAND SWING-ARM SCONCE Manuel utilisateur

RH

RH NORRIS TASK FLOOR LAMP Manuel utilisateur

RH

RH Slimline Manuel utilisateur

RH

RH PAUILLAC Manuel utilisateur

RH

RH ROUSSEAU Manuel de programmation

RH

RH VINTAGE SEWING TASK Manuel utilisateur

RH

RH PAUILLAC FABRIC SHADE GRAND Manuel utilisateur

RH

RH ANVERS C-TASK FLOOR LAMP Mode d’emploi

RH

RH Sonora Manuel utilisateur

Manuels Éclairage domestique populaires d'autres marques

JONATHAN Y

JONATHAN Y JYL5019A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL6007A Manuel utilisateur

Philips

Philips Ledino 31606/11/16 Manuel utilisateur

Salus

Salus UG600 Manuel utilisateur

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Manuel utilisateur

Hunter

Hunter Bullet Spotlight Kit Manuel d'instructions

Philips

Philips Ledino 16811/87/16 Manuel utilisateur

Philips

Philips 405441213 Manuel utilisateur

Philips

Philips Halogen Light Manuel utilisateur

Pentair

Pentair GLOBRITE Manuel utilisateur

Philips

Philips 55592-30-16 Manuel utilisateur

Livoo

Livoo Night light Manuel utilisateur

Schwaiger

Schwaiger NFL45 Manuel utilisateur

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Manuel utilisateur

MOOD

MOOD CORSIN JY-16 Manuel utilisateur

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Manuel utilisateur

JONATHAN Y

JONATHAN Y JYL8019 Manuel utilisateur

XTRASUN

XTRASUN XTDEOKT1 Manuel utilisateur

FLATIRON FLOOR LAMP

PARTS ENCLOSED

(A) Finial (1)

(B) Harp (B)

(C) Harp Saddle (1)

(D) Round Column (1)

(E) Lamp Base (1)

(F) Base Weight (1)

(G) Washer (1)

(H) Nut (1)

(J) Felt Paper (1)

(K) Wrench (1)

(L) LED Bulb (1)

FLATIRON FLOOR LAMP

IMPORTANT SAFETY INSTRUCTIONS

For safety purposes, this lamp is equipped with a polarized plug (one

blade is wider than the other). If the plug does not ﬁt securely into

outlet, do not force it - contact a professional electrician. Use the

plug with an extension cord only if it can be fully inserted into the

cord’s socket. Never alter the plug in any way.

This ﬁxture has been rated for one (1) 100-Watt maximum TYPE A

standard bulb (not included) OR one (1) 23-Watt compact ﬂuorescent

bulb (not included) or one (1) 4.5-Watt SBLED light bulb (included).

To avoid the risk of ﬁre, do not exceed the recommended wattage.

WARNINGS

All wires are connected. When unpacking, be careful not to pull

wires, as a bad connection may result. Do not connect electricity

until your fixture is fully assembled. To reduce the risk of fire,

electrical shock, or personal injury, always turn off fixture and allow it

to cool prior to replacing the light bulb. Do not touch or look directly

at the bulb when fixture is illuminated. Keep flammable materials

away from lit bulb.

WARNING: This product can expose you to lead, which is

known to the State of California to cause cancer and birth defects or

other reproductive harm. For more information, go to

www.P65Warnings.ca.gov.

THIS IS NOT A TOY AND THE PRODUCT HAS NO

PLAY VALUE.

WARNING: STRANGULATION HAZARD

Keep cord at least 3 ft away from cribs, bassinets, and toddler beds.

Keep out of reach of children under 3.

ASSEMBLY & INSTALLATION

1. Carefully remove all parts from the box and remove all plastic

covering.

2. Join Round Column (D), Lamp Base (E), and Base Weight

(F) together; slide Washer (G) over the threaded pipe, which

protrudes from bottom of Base Weight (F).

3. Screw Nut (H) onto the threaded pipe to secure Lamp Base (G)

to Round Column (D). Tighten with Wrench (K).

4. Remove backing sheet from Felt Paper (J) and afﬁx Felt Paper (J)

underneath the Base Weight (F).

5. Insert Harp (B) into the Harp Saddle (C).

6. Unscrew the Finial (A) from the Harp (B) and place the desired

shade (not included) over the Harp (B).

7. Attach the Finial (A) and tighten to secure the shade.

8. Insert Bulb (L) into threaded socket.

9. Plug into proper electrical outlet and test ﬁxture.

10. Assembly is complete.

CARE INSTRUCTIONS

Do not use polishes or cleaners on your lamp. Just wipe clean with

a soft cloth.