RFI CSA20-67-DIN Manuel utilisateur

406-512 MHz

CSA20-67-DIN

M-8564

SCREEN CENTRE

QTY: 1

M-8564

SCREEN SIDES

QTY: 2

CORNER BRACKET

QTY: 8

0A-20-67-DIN

DIPOLE ASSEMBLY

QTY: 1

LARGE CLAMP PLATE

QTY: 4

M6 FLAT WASHER

M6x65 HEX HEAD BOLT

M6 FLAT WASHER

M6 SPRING WASHER

M6 HEX NUT

M6x65 BOLT ASSEMBLY

QTY: 24

M12 STUD ASSEMBLY

QTY: 4

M12 HEX NUT

M12 SPRING WASHER

M12 FLAT WASHER

M12x250 THREADED ROD

INS-40101-4 ©RF Industries Pty Ltd 2009

www.bird-technologies.com

PAGE 1 OF 4

COMPONENTS

BEFORE ASSEMBLING YOUR ANTENNA PLEASE ENSURE THAT ALL THE COMPONENTS BELOW ARE

INCLUDED IN THE KIT.

406-512 MHz

SIDE SCREEN

CENTRE SCREEN

SIDE SCREEN

M6x65 BOLT ASSEMBLY

CORNER BRACKET

0A-20-67

DIPOLE ASSEMBLY

CENTRE SCREEN

M12 STUD ASSEMBLY

90°

2.5

110

145

2MM (5.7")

TOP OF BOOM

TO TOP OF SCREEN

CSA20-67-DIN

ANTENNA ASSEMBLY

STEP 1:

ASSEMBLE THE 2 SIDE SCREENS TO THE CENTRE SCREEN AS DEPICTED BELOW USING THE 8 CORNER

BRACKETS AND THE 16 M6x65 BOLT ASSEMBLIES INCLUDED IN THE KIT. TIGHTEN THE M6 BOLTS TO 15Nm

(11 lbf.ft)

STEP 2:

ASSEMBLE THE DIPOLE TO THE CENTRE SCREEN AS DEPICTED BELOW USING THE 2 LARGE CLAMP PLATES

AND THE 4 M12 STUD ASSEMBLIES INCLUDED IN THE KIT. TIGHTEN THE M12 NUTS TO 55Nm (40 lbf.ft). LEAVE

APPROXIMATELY 110mm PROTRUDING OUT THE BACK SIDE.

INS-40101-4 ©RF Industries Pty Ltd 2009

www.bird-technologies.com

PAGE 2 OF 4

406-512 MHz

CSA20-67-DIN

MOUNTING TUBE

(NOT INCLUDED)

ANTENNA MOUNTING HARDWARE HAS BEEN

DESIGNED TO ACCEPT MOUNTING TUBE

DIAMETERS IN THE RANGE OF 50-75mm (2-3")

MOUNTING TUBE LENGTH TO BE SIZED BY

INSTALLER TO SUIT INSTALLATION METHOD.

PLEASE NOTE MOUNTING POLE NOT

SUPPLIED.

LARGE CLAMP PLATE

INS-40101-4 ©RF Industries Pty Ltd 2009

www.bird-technologies.com

PAGE 3 OF 4

ASSEMBLY INSTRUCTIONS continued

STEP 3:

WITH THE ANTENNA ASSEMBLY LOCATED ON THE MOUNTING TUBE ATTACH THE REMAINING 2 LARGE

CLAMP PLATES AND TIGHTEN THE M12 NUTS CLAMPING THE ANTENNA ASSEMBLY TO THE MOUNTING

TUBE. TIGHTEN TO 55Nm (40 lbf.ft)

406-512 MHz

CSA20-67-DIN

SCREENED ARRAY IS DESIGNED TO BE

FIXED TO A TOWER MOUNTED POLE OR

TOWER LEG.

ENSURE THAT MOUNTING POLE,

CLAMPS AND MOUNTING STRUCTURE IS

APPROPRIATELY SIZED TO SUIT LOCAL

WIND AND ICE INSTALLATION

CONDITIONS.

TYPICAL

INSTALLATION

SIDE VIEW

STRAIN RELIEVE FEED CABLE BACK

TO SUPPORT STRUCTURE. SEAL

CONNECTOR WITH A SUITABLE SELF

AMALGAMATING TAPE.

TOWER

OUTRIGGER

TOWER CLAMPS

MOUNT POLE

SCREENED ARRAY ASSEMBLY

CSA-20-41-DIN

THESE ITEMS

NOT

INCLUDED

IN ANTENNA KIT:

ASSEMBLY INSTRUCTIONS continued

TYPICAL INSTALLATION

INS-40101-4 ©RF Industries Pty Ltd 2009

www.bird-technologies.com

PAGE 4 OF 4

Autres manuels RFI Antenne

Manuels Antenne populaires d'autres marques

Alfa Network

Alfa Network APA-L01 Manuel utilisateur

Naval

Naval PR-422CA Manuel utilisateur

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur

TERK Technologies

TERK Technologies TV44 Manuel utilisateur

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur

HP J8999A Manuel utilisateur

MobilSat

MobilSat MSP-S Manuel utilisateur

Steren

Steren ANT-UHF 13 Manuel utilisateur

Novatel

Novatel 600-G Manuel d'utilisation

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuel utilisateur

TRENDnet

TRENDnet TEW-AO12O Manuel utilisateur

Radio Shack

Radio Shack 15-1837 Manuel utilisateur

CommScope

CommScope CMAX-OMFX-43M-I53 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics DAP25 Manuel utilisateur

COBHAM

COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien

Trango Systems

Trango Systems AD900-9 Manuel utilisateur

Steren

Steren ANT-100 Manuel utilisateur

Proxim

Proxim 5054-PA-23 Manuel utilisateur