revoltec CARDMAGIC Manuel utilisateur
User’s Manual
REVOLTEC CARDMAGIC
USB 2.0 Card Reader/Writer with 3-port Hub
for
CompactFlashTM Card Type I & II, IBM MicrodriveTM,
Memory Stick®, Memory Stick PRO®,
MultiMediaTM Card, SecureDigitalTM Card,
SmartMediaTM Card, xD Picture Card
Table of Contents
Introduction……………………………………………………….…….…1
Package Contents….…………………………..……….………..…1
Safety Instructions…….….…………..……………………...……1
Specification……………….…..………………………………...…..…2
SystemRequirements………………..………………………..…..3
Driver Installation………………………...…………………..…....3
AP System Installation…….……………………………..….…10
Installation Verification…………..……………………….…….15
Check the System for USB 2.0 Hub……………………17
Product Details.……………………….. …………………..………19
Over-Current Status Figure……….………………………..21
Certificate………….…………………….……………………….………22
1
Introduction
Thank you for purchasing our REVOLTEC CARDMAGIC USB 2.0 card reader/writer
with built-in USB hub. Our card reader/writer allows you to read, write, and erase data
from the most popular cards such as CompactFlashTM Card Type I & II (CF Type I & II),
IBM MicrodriveTM, Memory Stick ® (MS), Memory Stick PRO®(MS PRO),
MultiMediaTM Card (MMC), SecureDigitalTM Card (SD), SmartMediaTM Card (SM),
and xD** Picture Card. The USB 2.0 hub allows you to add multiple USB 2.0 peripheral
devices to your PC and your USB 1.1 devices can function as usual. This device is
small, light, easy to carry, and easy to use.
**Not all types of Card Reader/Writers support xD Picture Card. Please
check the package or the vender for the xD card support.
Package Contents
· USB Card Reader/Writer with 3-port Hub
· Power Adapter
· USB Cable (optional)
· Driver CD
· Quick Installation Guide
Safety Instructions
1. Always read the safety instructions carefully.
2. Keep the User’s Manual for reference.
3. Keep the equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. If any of the following situations arises, please contact a service technician for
diagnostics:
· The equipment has been exposed to moisture.
· The equipment has been dropped or damaged.
· If the equipment has obvious sign of breakage.
· The equipment has not been working well or it is still not functioning after you refer
to the User’s Manual.
Specification
USB 2.0 Card Reader/Writer
· Four slots:
· CF Type I & II/ Microdrive………………………..…….…1
· MS/ MS PRO…….…….……………… ……….….…...………1
· SD/ MMC….…………………………………...….………....…….1
· SM or SM/ xD**………………………………………...……....1
· Compliant with Hi-Speed USB 2.0 CompactFlash, Memory Stick, MultiMedia,
SecureDigital, Smart Media Standard Specifications
· Transfer rate: 480 Mb/sec (maximum)
· Hot-Swapping allowed between all cards
· True plug-and-play function
· No driver needed for Windows ME/2000/XP
**Not all types of Card Reader/Writers support xD Picture Card. Please
check the package or the vender for the xD card support.
USB 2.0 Hub
Power:
· Bus-power: 5V 500mA
· Self-power: 5V 2.5A
· Adapter: Input: 100~240V 50Hz-60Hz
Output: 5V 2.5A
· Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate
1.5/12/480 Mbps)
2
· Connects up to 127 USB devices
· Over-current detection and protection
· True plug-and-play function
· 1 upstream and 2/4 downstream USB ports included
· 1 red LED as power-on indicator (In some models, there is a green LED indicator for
each downstream port apart from the red LED)
· Storage temperature: -10~85 °C
· Working temperature: 0~40 °C
USB Power Port (optional)
Apart from the 3 standard USB ports, there is a USB Power Port in some models that
is a value-added function of USB Hub. It is an ideal solution for powering some USB non-
data-transmitting devices such as USB lamps, USB messagers, USB mobile phone
chargers, etc. This socket-like USB Power Port supplies power up to 500mA.
Notice: The USB devices with data-transmitting function cannot work with USB Power
Port.
System Requirements
· IBM Compatible PC or Mac with available USB port
· With one of the following operating systems:
· Windows® 98/SE
· Windows® ME (no driver needed)
· Windows® 2000 (no driver needed)
· Windows® XP (no driver needed)
· Mac 9. X
· Mac 10. X
Driver Installation
Except Win 98SE and Mac system, the driver of card reader/writer is bundled on the
OS Win ME, Win 2000, and WinXP. Please follow the instructions step by step until the
installation is completed.
Win 98SE：
1. When the wizard searches for new drivers for USB 2.0 device, click ‘Next’.
3
2. Select ‘Search for the best drivers for your device [Recommended]’, and then
click ‘Next’ to continue.
3. You may either select ‘CD-ROM drive’ or ‘Specify a location’ (click ‘Browse’ to
select the driver for Windows 98 in our CD-ROM driver). Click ‘Next’ to
continue.
4
4. When the system is ready to install the driver, click ‘Next’ to continue.
5. Once the system has finished installing the software for the new driver, click
‘Finish’ to complete the first installation.
5
6. As step 1, the wizard searches for another new driver. Click ‘Next’ to continue.
7. As step 2, select the best driver for your device and click ‘Next’ to continue.
6
8. As step 3, select either ‘CD-ROM drive’ or ‘Specify a location’. Click ‘Next’ to
continue.
9. As step 4, when the system is ready to install the driver, click ‘Next’ to
continue.
7
10. Once the system has finished installing the software for the new driver, click
´Finish’ to complete the first installation.
11. Check ‘My Computer’ to make sure the four icons of CF, SM, SD, and MS of the
AP system is shown (see the next section for the AP system installation).
8
AP System Installation
If the four icons of the ‘Removable Disk’ are not specified, you need to install the
software from the driver CD for setting up the AP system. The procedures are listed
below:
Windows ME/2000/XP
1. As the picture shown, no ‘Removable Disk’ is marked. Please click the drive icon
of ‘RU3141 (F:)’ (“F” is the location of your CD drive).
2. Click the driver folder for Windows.
3. Click ‘Setup’ to start the installation.
9
Table des matières
Autres manuels revoltec Lecteur de cartes
