REMOVU R1 Manuel utilisateur
USER MANUAL
Table of Contents
1. Understanding This User Manual 3
2. Product Components and Features 4
3. Using REMOVU R1
Charging the Battery
Turning Your Device On and OFF
Navigating Your Device
Wi-Fi Connection: Connecting Your GoPro for the rst time (HERO3, 3+ Users)
Wi-Fi Connection: Connecting Your GoPro for the rst time (HERO4 Users)
Wi-Fi Connection: Connection Failure/Reconnect
Controlling GoPro (Power On / O)
6
6
6
7
8
9
10
11
4-1. Modes and Settings -
HERO3, 3+ Series
12
4-2. Modes and Settings -
HERO4 Series
17
5. Firmware Upgrade 20
6. Product Specication 21
7. Trouble Shooting Guide 22
8. Warranty Information 23
3
Thank you for purchasing our Wireless GoPro Live Viewing Device, REMOVU R1 (here-
inafter referred to as “R1”).
This Operator’s Guide describes how to handle and operate the R1.
Before using the R1, be sure to read this manual thoroughly for proper operation.
To enhance the performance of the product, the contents of this instruction manual
may be changed without prior notice.
(1) In accordance with Personal Information Security Law & related legislation, essel-t
Co., Ltd. will not be held responsible for any problem due to illegal use of this
product.
(2) Any defects or damage resulting from accident, misuse, abnormal use, abnormal
conditions, and improper storage will not be covered by the warranty.
(3) The warranty shall cover a period of 1 year. Please refer to Pg. 23 for more details.
(4) Use only a dry soft cloth or clean wipe when cleaning the LCD panel surface. Do
not use other cleaning substances. It may cause discoloration or damage to the
surface of the product.
(5) Keep away from children and pets. Store your devices out of the reach of children.
(6) REMOVU is the registered trademark of essel-t Co., Ltd. essel-t Co., Ltd. reserves the
rights regarding all works related to the REMOVU brand such as product design,
trademarks, and product-promotional videos. It is prohibited to reproduce, copy,
modify, or use related works without permission. Any violation may be penalized
in accordance with the relevant regulations.
(7) GoPro, HERO, the GoPro logo, and the GoPro Be a HERO logo are trademarks or
registered trademarks of GoPro, Inc.
Safety Precautions
1. Understanding This User Manual
4
Package Component
Names of Each Part
1. REC Button (Shutter / OK)
2. LCD Screen
3. Network Status Indicator LED
4. M (Mode / Power) Button
5. Recharging Indicator LED
6. Back Button
7. USB Port Cover
8. USB Port (Recharging and Data Transfer)
9. Reset Button
10. Wristband Holder
Please make sure your package includes all of the following items.
SET WRISTBAND USB CABLE QUICK GUIDE
2. Product Components and Features
1
10
8
9
5
23
4
6
7
5
1080/60/W
0015 45:30
LCD Screen Indicators
1. Camera Modes / FOV(Field of View) Indicator
VIDEO Mode, PHOTO Mode, BURST Mode, TIME LAPSE Mode
(Please refer to Pg. 12 for more details.)
2. Resolution / FPS
3. GoPro Battery Life
4. R1 Battery Life
5. Saved Image / Video Counter
6. Remaining Recordable Hours / Number of Photos Counter
7. Recharging Indicator LED
Red Light when recharging. It goes o when it is fully charged.
8. Wi- Signal Strength Indicator
45
7
6
1 2 38
6
1. Connect the device to a computer
USB port using the micro USB cable
included in the package.
Turning Your Device On and OFF
Charging the Battery
*The battery should be fully charged before using R1 the rst time.
Turning it on
1. Press the M (Mode / Power) button for about 1
second to turn on the power.
2. The REMOVU logo will appear. After short load-
ing, Wi-Fi network list will pop up.
2. R1 can also be charged with a USB
power adapter. (Adaptor’s not
included)
We recommend using GoPro, or
Apple iphone adaptors.
1. Press the M (Mode / Power) button for about 2
seconds to turn o the device. REMOVU Power o
logo will appear then the device will be turned o
with the red LED blinking three times.
2. If no input is made for 30 seconds in the Live View
Mode, the screen will shut o to save power.
Turning it o
3. Using the REMOVU R1
7
LCD Brightness STANDARD mode / ECO mode
Camera Network It lists the available Wi-Fi network you can connect to
System information It displays the general information of the device
Navigating Your Device
To Adjust Settings
1. Live View Mode 2. Hide OSD 3. Screen Saver
4. Clock 6. Settings Mode5. Playback Mode
After the device is powered on and Wi-Fi connec-
tion is established, it goes into the Live View mode
automatically. From there, you can simply navigate
through dierent functions using the Back button.
The order of appearance of the functions are illus-
trated below.
The settings can be adjusted in the Setting Mode.
Please navigate to the settings mode using the
M (Mode / Power) button, and enter the menu by
pressing the REC (Shutter / Select) button
The list of the settings are:
1080/60/W
0015 45:30
8
Wi-Fi Connections:
Connecting Your GoPro for the rst time. (HERO3, 3+ Users)
1. Plese go to the GoPro App settings menu on your
HERO3, 3+ to turn on the Wi-Fi fuction.
2. Turn on your REMOVU R1.
3. When the Select Camera Network Screen ap-
pears, select your GoPro’s SSID which you have
created.
4. Please type the password and press enter.
5. You will see Blue LED light when the connection
is sucessfully established.
1. Go to GoPro support page on GoPro Website to
upgrade your GoPro Camera to the latest rm-
ware version.
2. While upgrading, you will be asked to set up Wi-Fi
SSID, Password. Please make sure to remember
your password and SSID.
HERO3, 3+ Wi-Fi SSID, and Password setup
Connecting your GoPro HERO3, 3+ to REMOVU
www.gopro.com
/support
9
1. Install the GoPro App on your Smartphone.
2. Go to your GoPro 4 Setup → Wireless → select
GoPro App. 6 digit Pin number will appear.
3. Open the GoPro App and connect your GoPro
Camera.
4. Enter the 6 digit Pin number that the GoPro Cam-
era is showing.
5. Create the SSID, and Password for your Camera.
6. After the connection is established, shut down
the App.
1. Turn on your HERO4 camera and go to HERO4
Setup → RC & App → Select Existing to turn on
the Wi-Fi function.
2. Turn on your REMOVU.
3. Select the SSID you generated from the Select
Camera Network list.
4. Enter the password you created.
5. The Blue LED will turn on when the connection
get established sucessfully.
Wi-Fi Connections:
Connecting Your GoPro for the rst time. (HERO4 Users)
HERO4 Wi-Fi SSID, and Password setup
Connecting your GoPro HERO4 to REMOVU
10
Wi-Fi Connection: Connection Failure / Reconnect
1. Flashing red LED and Wi-Fi Network Not Connect-
ed message will appear if Wi-Fi fails to connect or
lose its signal.
2. Type in your password again and try reconnect-
ing the device.
3. If the connection is restored, blue LED will ash
and the Live View will appear.
4. When reusing the device, R1 will try to connect to last device it was connected to
using the information saved from previous use.
5. Switching between dierent cameras can be done in the Settings mode → Camera
Network menu. Please choose the camera you wish to switch to.
Tips: When the Wi-Fi signal gets weaker, it may cause lags or the screen may
not display the screen.
Autres manuels pour R1
1
Table des matières
Autres manuels REMOVU caméscope
Manuels caméscope populaires d'autres marques
Panasonic
Panasonic AG-HMC152EN Manuel utilisateur
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur
MYDLINK
MYDLINK DCS-6100LH Manuel utilisateur
Sony
Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur
SECURECOM
SECURECOM V-5014B Manuel utilisateur
Panasonic
Panasonic HDC-SD100 Manuel utilisateur
