Remoran WAVE 3 Manuel utilisateur
OPERATING MANUAL
REMORAN™WAVE 3
REMORAN™ WAVE 3
2
Version 0.5
Last updated on 05 June 2020
3
REMORAN™ WAVE 3
CONTENTS
Contents 4
1. Safety measures 6
1.1 Electrical safety 6
1.2 Installation safety measures 6
1.3 Restrictions concerning operation and
the operating environment 7
1.4 Safety measures concerning operation and
the operating environment 7
2. Product information 8
2.1 General description and the operating principle 8
2.2 Contents of the sales package 8
2.2.1 Hydrogenerator 9
2.2.2 Charger 10
3. Storage and transport 11
4. Mounting 11
4.1 Summary of the mounting steps 12
4.2 Fastening the mounting rail to the boat 13
4.3 Mounting and dismounting the turbine 15
4.4 Installing the charger 16
4.4.1 Installation location considerations: 16
4.4.2 Installing the cable feedthrough 16
4.4.3 Using extended generator cables 17
4.4.4 Connecting the generator cables to the charger 18
4.4.5 Connecting the charging wires to the charger 18
4.4.6 Circuit diagram 20
5.1 Before operation 21
5.1.1 Adjusting the height of the outboard unit 21
5.1.2 Mounting the outboard unit to the rail 22
REMORAN™ WAVE 3
4
5.1.3 Adjusting the angle of the outboard unit 23
5.3 Dismounting the outboard unit 25
6. Operating the charger 25
6.1 Before operating the charger 25
6.2 Operating the charger 26
6.3 Charger’s charging algorithms 26
6.4 Short-circuit of the charger 28
6.6 Charger LED indicators 30
7. Technical specifications 31
7.1 Hydrogenerator outboard unit 31
7.2 Charger 31
7.3 Performance 32
8. Troubleshooting 33
8.1 Outboard unit issues and malfunctions 33
8.2 Charging issues 34
8.3 Bluetooth connection issues 35
9. Maintenance 36
10. Product disposal 37
10.1 Disposal of the hydrogenerator 37
10.2 Disposal of the charger 37
11. Supplies and spare parts 38
12. Warranty 39
13. FAQ 40
Attachment 1 Product return form 42
Attachment 2 Cooling plate installation guide 43
5
REMORAN™ WAVE 3
Thank you
for selecng Remoran™ Wave 3 Hydrogenerator!
Remoran™ Wave 3 Hydrogenerator is a state-of-the-
art product based on Finnish design and workmanship.
We hope you enjoy your voyage
with Remoran™ Wave 3 Hydrogenerator!
Please read the operang manual in full before
operang the product.
Remoran reserves the right to modify
this document at any me.
REMORAN™ WAVE 3
6
1. SAFETY MEASURES
1.1 Electrical safety
When the hydrogenerator operates in a normal manner (the maximum speed is
not exceeded), the voltages generated by the generator and the charger will not
exceed 120VDC or 50VAC. Thus, the product operates in the extra-low voltage
area. Extra-low voltage is considered to be safe for the operator. However, the
operator is always responsible for monitoring the funconing of the product and,
if needed, disconnecng the charger and the hydrogenerator to prevent hazard
and damage.
The charging current causes power loss in the wires, resulng in warming of
the wires. Abnormal warming indicates a malfuncon in the equipment. If that
happens, the operator must immediately disconnue charging (stop the boat) and
invesgate the cause of the malfuncon. In the installaon stage, the charging
wires of the baery should always be connected last (the generator wires are
connected rst).
1.2 Installation safety measures
When determining the locaon to mount the product in the back of the boat, keep
in mind that the outboard unit weighs 7.5 kg. It is important to nd an opmal
locaon for mounng the product, since the locaon has a material impact on
performance. If possible, request another person’s assistance to ensure that the
product is mounted safely. If you mount the product while the boat is aoat, wear
the required safety gear (a safety vest, for example).
!
Verify the polarity of the charging wires (+, -) to ensure you perform
the connecon correctly. Damage to the charging unit is inevitable if it
is installed improperly. For more detailed installaon instrucons, see
secon 4.4 Installing the charger.
The posive (red, +) charging wire should always be equipped with a
circuit breaker (40A).
!
7
REMORAN™ WAVE 3
1.3 Restrictions concerning operation and the
operating environment
To prevent product breakdowns, the maximum operang speed of the boat is
15 knots. (Note! The charging unit stores data on the turbine rotaon speed and
uses this data to calculate the operang speed of the boat.) If the operang
speed approaches 15 knots, li the product up from the water or disconnect the
interior connector of the generator cable from the connector of the outboard
unit’s cable.
For the winter, the outboard unit must be dismounted from the boat and stored
in a warm (+5°C) area to prevent it from freezing. Do not operate or store the
product at temperatures below 0°C, since any water remaining in its structures
may freeze and thus break the product.
1.4 Safety measures concerning operation and the
operating environment
• Foreign objects such as seaweed entangled in the generator unit must be
removed immediately. Foreign objects (shnets, shing line, seaweed) increase
fricon and considerably increase the force the structures are exposed to.
• Note that in order to operate the product safely, the operator must inspect
the product regularly and carry out the required cleaning and maintenance
procedures.
• The product should be mounted on the boat in accordance with this manual
while observing precision and care.
• Check the outboard unit for any signs of impact or other mechanical forces.
• Check that the charging unit has been installed properly (both in terms of
electrical and mechanical requirements) and that it has not been exposed to
water.
REMORAN™ WAVE 3
8
[Figure 1] CONTENTS OF THE SALES
PACKAGE
1. 1 pc Remoran™ Wave 3
-hydrogenerator outboard unit, with
an integrated 2 m cable and a female
connector
2. 1 pc Mounng rail
3. 1 pc 3-bladed turbine ("propeller")
4. 1 pc Generator cable with a male
connector and a plug
5. 1 pc Remoran™ Charger 300W
electronic charger
6. 1 pc Ferrite lter
7. 1 pc Operang manual
8. 1 pc Mounng accessories kit
• Turbine supplies: M6x30 screw and
M6 spring washer
• Rail fastening supplies:
2 pcs M8 bolts, 2 pcs M8 washers and
2 pcs M8 nuts
• Generator cable hardware 2 pcs
wood screws
2. PRODUCT INFORMATION
2.1 General description and operating principle
The hydrogenerator generates electrical energy when the boat is in moon. The
turbine of the outboard unit that is installed in the transom on the outside of the
boat rotates when the boat is in moon, running the generator located in the
lower part of the outboard unit. The generator produces low-voltage three-phase
electricity, which is conducted to a charger, installed inside the boat, through a
weather-resistant cable and a feedthrough connector. The charger converts the
electrical energy to a form feasible for baeries (12V or 24V) and also ensures that
the charging sequence of the baery is correct. The Remoran™ Charger 300W
supports Bluetooth® wireless technology which allows the user to connect the
charger to their own smartphone.
3
21
4
5 6 7 8
9
REMORAN™ WAVE 3
[Figure 2] OUTBOARD UNIT
COMPONENTS:
1. Angle adjustment knob
2. Angle guide
3. Locking handle
4. Frame
5. Generator cable
6. Telescopic blade
7. Locking pin and coer
8. Generator
9. Turbine
2.2 Contents of the sales package
2.2.1 Hydrogenerator
The outboard unit of the hydrogenerator consists of a frame, a telescopic blade
and a turbine. The top of the blade is aached to the frame. The top of the
frame is equipped with a locking handle that snap-locks the outboard unit to the
mounng rail fastened to the boat transom. There is an angle guide extending
REMORAN™ WAVE 3
10
from the top of the frame, and the angle adjustment knob slides along this guide.
The angle adjustment knob locks the blade to the desired posion.
2.2.2 Charger
The charger consists of a cooling prole, printed circuit board and a plasc
cover equipped with screw terminals for cables as well as the charger status and
Bluetooth connecon indicator lights.
[Figure 3] CHARGER COMPONENTS:
1. Cooling prole
2. Charging wire (pos)
3. Charging wire (neg)
4. Screw terminals of the generator wires
5. Bluetooth® connecon indicator
6. Charger’s Status LED indicator
7. Plasc cover
8. Fastening slots (4 pcs)
Autres manuels pour WAVE 3
5
Table des matières
