Remo+ REMOBELL Manuel utilisateur
Quick Start Guide
WHAT’S IN THE BOX
RECHARGEABLE AA BATTERIES
REMOBELL
BATTERY COVER WITH SCREW
BRACKET WITH SCREWS AND ANCHORS
MEET REMOBELL
BACK BRACKETFRONT
Battery cover screw
Reset button
8
9
Bracket screws and
anchors
Security screw
10
11
PIR sensor
Mic
Camera lens
ALS sensor
LED lights
Bell button
Speaker
1
2
3
4
5
6
7*Remove the scratch protection sticker before use
HOW TO REGISTER REMOBELL
CREATE AN ACCOUNT
1. Make sure your mobile device is connected to your home Wi-Fi.
2. Download and launch the RemoBell app.
3. Press sign up at the bottom of the login page.
4. Enter your email and create a password and prole name.
Then press sign up. For Help, press the at the top right corner.
1. Have your Wi-Fi network password available.
2. Insert the six rechargeable AA batteries into the battery slots on the back of
the device.
3. RemoBell's LED light should ash up and down.
If it is not, press the bell button.
4. Go back to the app, and select your timezone.
5. Switch to your phone’s Wi-Fi settings, leaving your RemoBell app open.
Please DO NOT CLOSE YOUR APP.
6. Connect to the network Remobell_xxxxxx. If you
get the message “internet is unavailable”, tap “okay”.
7. Once you’re connected to the Remobell_xxxxxx
network, switch back to the RemoBell app and press
continue.
8. Select your home’s Wi-Fi network, enter the password, then press
continue. Your app will then complete the registration. This may take up to
3 minutes.
9. Secure the battery cover using a screwdriver.
REGISTER REMOBELL
HOW TO MOUNT REMOBELL
3. Slide the RemoBell to the top of the bracket,
then rmly push the device in.
4. Tighten the security screw into the base of the
RemoBell to secure the device into the bracket.
1. Position the mounting bracket on location
of choice and ensure that it is level.
2. Screw the mounting bracket into the wall
using a screwdriver and the enclosed four
screws (Anchors are included for brick,
concrete, or stucco).
1. Remove the security screw. Pull the RemoBell
from the bottom to detach from the bracket.
2. Remove the battery cover using a
screwdriver.
3. Remove the rechargageble batteries
and charge them using a battery
charger (not included).
4. When the batteries are fully charged,
place them back into the RemoBell and
secure the battery cover using a
screwdriver.
*You can use any AA batteries
HOW TO RECHARGE YOUR BATTERIES
FAQ
Forgot your password?
1. Press “forgot password” on the login page.
2. Enter your account email and click SEND.
3. Check your email (including spam folder) for the temporary password.
4. Open the RemoBell app and log in using your account email and the
temporary password.
5. Create a new password.
How many users can access the RemoBell?
You can view the RemoBell from up to 5 iOS or Andriod devices:
1. Open the RemoBell app from your choice of device.
2. Log in using the same account email and password.
3. Enter a dierent prole name (this will show in the Viewers list).
Is a Cloud plan required?
No, the Cloud plan is specically for saving videos. You will still be able to
receive instant alerts, see and communicate with your visitors, and access
your activity log without a Cloud plan.
When you purchase RemoBell, you have a complimentary 30-day trial of
the Cloud plan. To save videos after the 30-days, you can extend your
Cloud plan for $3 every 30 days or $30 per year on our website
(olivendove.com).
Table des matières
Autres manuels Remo+ Accessoires
