Rego 76403 Manuel utilisateur

LEGO The Ministry of Magic #76403

LIGHT KIT INSTALL GUIDE

The Ministry of Magic #76403

LIGHT KIT INSTALL GUIDE

Hi There!

We’re here to help you get started on the LEGO®The Ministry of

Magic #76403 LIGHT KIT INSTALL GUIDE

This PDF details the instructions for the LED light kit only. If you

are wishing to purchase this product, please go to our webaite

at: www.regodesign.net.

If you run into any issues, please refer to the troubleshooting

section towards the end of this guide or contact us at email:

[email protected].

Enjoy!

LEGO The Ministry of Magic #76403 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 2

LEGO The Ministry of Magic #76403 LIGHT KIT INSTALL GUIDE

1 x Slow Flash Light 30cm

1 x Warm White Bit Light 30cm

1 x Headlights -30cm Blue

1 x 15 cm Connecting Cable

1 x USB Power Cable

PACKAGE CONTENTS:

INSTRUCTIONS

7 xRGB 15cm Connecting Cable

1 xRGB 30cm Connecting Cable

1 x Battery Case

7 x RGB Strip Light

1 x RGB Switch Remote Cortrol

(Battery not included)

1 x 4 Port Expansion Board

LEGO The Ministry of Magic #76403 LIGHT KIT INSTALL GUIDE

Contents

Before You Begin

Instructions

Final Product

Troubleshooting

Contact

INSTRUCTIONS

Laying cables in between

and underneath bricks

Cables can fit in between and underneath

LEGO® bricks, tiles, and plates providing they are

laid correctly between the LEGO® studs.

Please be careful when join LEGO® together

around cables; instead ensure they are laying

comfortably in between each stud.

CAUTION: You can't use force on LEGO® to

connect over a cable or it will result in damaging

the cable and light.

Before You Begin

Connecting Cable Connectors To

Expansion Boards

Please paid extra care when inserting connectors to

ports of Expansion Boards. When connectors can be

inserted only one way and it is the right way. With

the expansion board facing up, look for the soldered

“=” symbol on the left side of the port. The connector

side with the wires exposed should be facing toward

the soldered “=” symbol as you insert into the port. If

a plug won’t fit easily into a port connector, which it

should. PLEASE DO NOT FORCE IT.

Incorrectly inserting the connector will result in bent

pins inside the port or even overheating of the

expansion board when connected. So please don't

do it.

LEGO The Ministry of Magic #76403 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS 5

LEGO The Ministry of Magic #76403 LIGHT KIT INSTALL GUIDE

Before You Begin

Connecting Cable

Connectors To Strip Lights

Please take extra care when inserting

connectors to ports on the Strip Lights. When

connectors can be inserted only one way and

it is the right way. With the Strip Light is

facing up, please ensure the side of the

connector with the wires exposed is facing

down. If a plug won’t fit easily into a port

connector, which it should. PLEASE DO NOT

FORCE IT. YOU will damage the plug and the

connector.

INSTRUCTIONS 6

LEGO The Ministry of Magic #76403 LIGHT KIT INSTALL GUIDE

Before You Begin

Installing Bit Lights

Under

Lego® Bricks And Plates

When installing Bit Lights under

LEGO® pieces, please ensure

they are placed the correct way

up (Yellow LED component

exposed). You can place them

directly on top of LEGO® studs

or in between. As the picture

show.

INSTRUCTIONS 7

LEGO The Ministry of Magic #76403 LIGHT KIT INSTALL GUIDE

INSTRUCTIONS

To ensure a correct, quick, and smooth

installation of your light kit, please read

and follow each step carefully.

If you run into any issues, please refer

to the online troubleshooting guide or

just send us a quick email at

[email protected]

We will answer as soon as possible.

INSTRUCTIONS

DISCONNECT

LEGEND CONNECT

RECONNECT TURN / FLIP DIRECTIONAL TWIST / BRAID POWER ON TEST NOTE ICON

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the

light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues in our troubleshooting section.

LEGO The Ministry of Magic #76403 LIGHT KIT INSTALL GUIDE

Slow Flash Light 30cm x 1

INSTRUCTIONS 9

Warm White 30 cm Bit Light x 1

Viscous Accessories x 1