Regency G51 Guide de démarrage rapide
918-238 11/06/03
Owners&
Installation
Manual
Fireplace Products International Ltd.
6988 Venture St., Delta, B.C.
Canada, V4G 1H4
Masport Head Office - Australia
54 Boundary Rd. Braeside
P.O. Box 553
Mordialloc 3195
Ph. (03) 9586-7777
Fax. (03) 9586-2980
FORYOURSAFETY
What to do if you smell gas:
zz
zz
zDo not try to light any
appliance
zz
zz
zDo not touch any
electrical switch: do not
use any phone in your
building.
zz
zz
zImmediately call your
gas supplier from a
neighbour's phone.
Followthegassupplier's
instructions.
zz
zz
zIfyou cannotreachyour
gassupplier,callthefire
department.
WARNING:
Improper installation, adjustment,
alteration, service or maintenance
cancauseinjuryorpropertydamage.
Refertothismanual. Forassistance
oradditionalinformationconsultan
authorizedinstaller, serviceagency
or the gas supplier.
FORYOURSAFETY
Donotstoreorusegasolineorother
flammable vapours and liquids in
the vicinity of this or any other
appliance.
Installation and service must be
performedbyanauthorizedinstaller,
service agency or the gas supplier.
G51 SUREFIRE
ZERO CLEARANCE KIT
KIT # 390-900
PLEASE KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Australian Heating Distributors
10/46 James St.,
Guildford, Western Australia 6055
Masport Head Office - New Zealand
1-37 Mt Wellington Hwy.Panmure,
P.O. Box 14349
Auckland 6.
Ph. (9) 570-9009
Fax. (9) 527-1294
© FPI Fireplace Products International Ltd.
2G51 Zero Clearance Kit
TABLE OF CONTENTS
G51 SUREFIRE
ZERO CLEARANCE KIT
CONTENTS PAGE
Listings & Code Approvals................................................... 3
Specifications .......................................................................3
GeneralInformation ............................................................... 4
Parts.....................................................................................4
ClearancestoCombustibles ................................................. 4
LocatingYour Fireplace ......................................................5
Framing ................................................................................5
KitAssembly.........................................................................6
Venting .................................................................................7
ZeroClearanceBoxInstallation .............................................8
OptionalOutsideCombustionAirSupplyInstallation..............9
GasSupplyLine.................................................................... 9
ElectricalSupply ...................................................................9
3
G51 Zero Clearance Kit
Specifications
INSTALLATION
LISTINGS AND CODE APPROVALS
This gas component has been tested in accordance with National Safety Standards, and has been certified for
installationandoperationinAustraliaandNewZealandasdescribedintheseInstallationandOperatingInstructions.
Checkwithyourlocalbuildingcodeagencybeforeyoubeginyourinstallationtoensurecompliancewithlocalcodes,
includingtheneedfor"permits"andfollow-upinspections.Ifanyproblemsareencounteredregardingcodeapprovals,
or if you wish clarification on any of the instructions contained here, contact your local dealer.
4G51 Zero Clearance Kit
PARTS
Included with Kit:
1 Main Body Assembly
1 FaceplateTopInsulation
1 ZeroClearanceTopLouverAssembly
INSTALLATION
GENERAL INFORMATION
This kit consists of factory built parts that require minimal
assemblytoform theZero Clearanceboxfor theG51 Gas
Insert.TheZeroClearanceboxcanthenbefixedintoaframed
combustibleconstruction,andastandard"B-vent"installed
ontheassemblyfortherequiredventing.Theinsertcanbe
installedlater.Thefaceplatewillnormallyoverlapontopofthe
finishedwall.YoucanconverttheG51GasInsertmodelsinto
highlyefficientheatproducingZeroClearanceFireplaces.
CLEARANCES TO COMBUSTIBLES
The clearances for the Zero Clearance Kit are 0" to combustibles (back, side and floor) but when planning your
installationreview theclearancesrequired (seebelow) afteritis installedin theZeroClearanceKit.
Clearances to Combustibles
Refertoinstallationmanualforclearances.
Note: Ensure the paint that is used on the mantel and the facing is "heat resistant" or the paint may discolour.
TheZero ClearanceKit mustbe installedon aflat,solid,continuoussurface(e.g.wood,metal,concrete).Thismay
be the floor, or raised up on a platform to enhance its visual impact.
Combustible Mantel Clearances
Refertoinstallationinstructionsonpage7ofthemanual
forclearances.
Facing Requirements
Thefireplacerequiresanon-combustiblematerialextending
tothe framingheader andsides.
5
G51 Zero Clearance Kit
INSTALLATION
A
D
E
C
F
B
LOCATING YOUR G51 FIREPLACE
DuetohightemperaturestheInsertshouldbelocatedoutoftrafficand
awayfromfurnitureanddraperies. Provideaminimumof48"(1220mm)
front clearance to the unit.
This appliance is Listed for Alcove installations, maintain minimum
Alcoveclearancesasfollows,minimumceilingheightof 65.5"(1666mm),
minimum width of 56.5" (1435 mm) and a maximum depth of 36"
(915mm).
Thisunitis not approvedforinstallationinto a mobilehome.
FRAMING
1) Thetrimkitallowsfor1/2"(13mm)offinishnon-combustiblefacingmaterial.Thekitmaybeinstalleddirectlyon
and/oragainststandardcombustiblebuildingmaterials.
2) Frameinthe ZeroClearance box forthe Kit withframing material.
3) Forexteriorwalls,vapourbarrierandinsulatetheZeroClearanceboxtothesamedegreeastherestofthehouse,
or according to local installation codes.
4) Theappliancemaybeenclosedabovethestandoffsonthecabinetbuttheclearancesstatedontheb-ventchimney
mustbe maintained.
a) CrossCorner d) Island
b) RoomDivider e) Flush with Wall
c) Flat on wall f) Flat on Wall
Corner
Framing Dimensions
A B C
839mm 1118mm 428mm
Warning:Combustiblematerialsmustnotextendinside
the stand-offs on the side, top and rear supports. For
safetyreasonsdonotmodify oralteranycomponentsof
the390-900kit.
6G51 Zero Clearance Kit
INSTALLATION
KIT ASSEMBLY
Parts
1) TopAssembly
2) Base Assembly
3) Back Panel
4) LeftSidePanel
5) RightSide Panel
6) FrontPanel
Kit Assembly
1) Lay the Base Assembly on a flat surface.
2) Attach the Left and Right Side panels to the Back
panel(onescreweachside).NOTE:theSideflanges
are on the outside, Back flanges are on the inside.
3) LifttheBack/Side Assembly ontotheBase, position
asshowninthediagram.TheBackandSidesreston
theBasewiththeBaseflangesontheoutside.Fasten
theBacktotheBase(3screws)and theSidesto the
Base (2 screws for each side).
4) Attach the top assembly, with the top flanges on the
outside of the Sides and Back panels.
7
G51 Zero Clearance Kit
ChimneyRoutes
1) This fireplace must be vented with a 8" (200mm)
diameterClass“B”vent.Theinstallationoftheventing
systemmustconformandbeinaccordancewiththe
natural gas installation code CAN/CGA - B149
(Canada),ANSIZ223.1(U.S.A.),AG601(Australia),
and NZS 5261 (New Zealand). Minimum chimney
heightfrombaseoffireplacemustbeatleast12feet
(3.7m).
INSTALLATION
2) MasonryChimney Installation:
This application can be connected to a masonry
chimney flue. Make sure the masonry chimney is
clean and in good working order. When an existing
masonry chimney is unlined and local experience
indicatesthatgascondensationmaybeaproblemor
if local codes dictate, an approved liner should be
installed. Use“B”Venttobridgethegapbetweenthe
fireplaceandthemasonrychimney.Toensureproper
fluesizingand operation it isrecommendedthat the
masonrychimneybelinedwithanapprovedaluminium
chimney liner of the same diameter as the “B” Vent.
Makesureconnectionbetween“B”Ventandmasonry
is completely sealed. Flue pipe exposed to cold air
should be insulated in a chase. If condensation
occurs, a trap should be installed at bottom of flue.
VENTING
8G51 Zero Clearance Kit
INSTALLATION
1) AssembleZeroClearanceboxasperinstructionson
page6. DOTNOTINSTALLFRONTPLATE.
2) Placetheunitonthestand-offsintheZeroClearance
box.
3) Slide the unit in all the way back.
4) Run required gas and electrical connections to the
ZeroClearancebox,botharelocatedonthelefthand
sideoftheunit.See"GasSupplyLine"onpage9and
"Electrical Supply" on page 9.
5) Attachfluecollartothetopassembly.Alignwithholes
in ZC box and secure with 4 screws.
6) Installfrontpanelofzeroclearancebox,secureusing
6 screws.
7) Makethefinal gasand electricalconnectionsas per
theInstructionmanual.
Zero Clearance Box with
unit in place.
Zero Clearance Box assembled.
ZERO CLEARANCE
BOX INSTALLATION
9
G51 Zero Clearance Kit
INSTALLATION
OPTIONAL OUTSIDE COMBUSTION AIR SUPPLY INSTALLATION
A4"(100mm)dia.aluminumflexpipeorequivalentmay
beinstalledfromtheoutside(withaproperexteriorcover)
to the Zero Clearance cabinet. There is an outside hole
provided on the rear wall of the kit. This will provide
adequateoutsidecombustionair supply to theheater.
ELECTRICAL SUPPLY
Provide120VAC,60Hz(inAustraliaandNewZealand:240VAC,50Hz)receptaclewithin24"(610mm)oftheleftside
of the appliance (not inside the Zero Clearance Cabinet). Plug the cord on the appliance into the receptacle.
GAS SUPPLY LINE
An authorized service person should install the gas line in accordance with all local building codes. If codes permit,
flex gas line or coiled copper tubing may be used as gas supply line.
PrintedinCanada
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Regency Cheminée intérieure
Regency
Regency Greenfire GF900C Guide de démarrage rapide
Regency
Regency Bellavista B36XTE Guide de démarrage rapide
Regency
Regency I1203S Guide de démarrage rapide
Regency
Regency City Series Manuel utilisateur
Regency
Regency Liberty L900-1 Manuel utilisateur
Regency
Regency P121-NG10 Guide de démarrage rapide
Regency
Regency F300B Guide de démarrage rapide
Regency
Regency I31-NG3 Guide de démarrage rapide
Regency
Regency GF900C-NG Guide de démarrage rapide
Regency
Regency U24-NG and Manuel du propriétaire
Regency
Regency E18-NG Manuel utilisateur
Regency
Regency PG121-NG Guide de démarrage rapide
Regency
Regency Liberty L234 Series Guide de démarrage rapide
Regency
Regency L965E-NG Guide de démarrage rapide
Regency
Regency Liberty Gas Fireplace L676-NG1 Guide de démarrage rapide
Regency
Regency Classic I1200S Guide de démarrage rapide
Regency
Regency bellavista B36XTCE Manuel utilisateur
Regency
Regency E21-LP2 Guide de démarrage rapide
Regency
Regency P33CE-NG Guide de démarrage rapide
Regency
Regency City CB50E Guide de démarrage rapide
