RefStuff RefScorer Manuel utilisateur

USER INSTRUCTION INFORMATION MANUAL: QUICK GUIDE

#groundbreaking #gamechanging #gamechanger

DON'T FORGET... all this is in addition to being able to select Home and Away team colours

AND Record the Score of the Game! - the WORLDS FIRST and only digital watch to do this!!!

Already packed with many referee-specific features like preset match timers for 3, 5, 10, 12,

15, 20, 25, 30, 35, 40, 45, 60 and 90 minutes, your choice of Count-Up or Count-Down time

in RefScorer Mode, auto-elapsing extra/added time for when the regulation time is over as

well as your optional choice of vibration, beep or both at the same time!

1/100 Second Stop Watch, Daily Alarm Timer, 12/24 Hour Formats, Current/Actual time,

(Date, Day, Month, Year), Backlight, Water Resistant to 50m, Long Lasting Battery, 1 Year

Warranty.

With its all-weather construction and groundbreaking, gamechanging features, this is by far

the most innovative watch available to all referees around the world!

* Old School Classic with New Cool Tech *

RefScorer Digital is an absolute groundbreaking game changer in referee watches and now

comes packed with even more incredible features. In addition to it being the worlds first

and only digital watch that allows you to select home and away team colours AND record

the score throughout the match!

- The INCREDIBLE Interchangeable Different Coloured Top Rings/Bezels!!! –personalise

and pair your watch to match the colour of your Referee shirt or outfit that you are wearing

for your match!

The RefScorer Digital Watch v2.021 will come supplied with the Silver & Black Top

Ring/Bezel as seen in the pictures.

Additional Colours will be available to purchase in packs of 5.

SPECIAL GOLD TOP RING/BEZEL! - will you be the lucky

recipient of one of only 100 Special GOLD Top Ring/Bezels

hidden inside the watch pouch cases?!!?

Find one and take a picture, tag us on all social media

@refscorer and you'll be sent a one time huge discount

code to be used in our store!

The 6 Watch Face Modes/Features

SETTING AND SELECTING VIBRATION AND BEEP ALERTS

Vibrate & Beep Alerts for Match

Day use are easily selected from

the Normal Time Mode/Screen.

Single press of the SELECT button

turns the Vibrate function on/off.

Single press of the ADJUST button

turns the Beep function on/off.

You can also operate the Vibrate & Beep Alerts

from the Alarm Time Mode/Screen.

Hold the ADJUST button for 3 seconds and then

the screen will flash. Scroll through the features

pressing the MODE button.

Here you can set an alarm, and also toggle the

Vibrate & Beep Alerts on/off.

*Press the Start/Stop button to toggle the Alarm

on/off.

NORMAL TIME MODE/SCREEN

REFSCORER MATCH DAY SCORE MODE/SCREEN

The Normal Time Mode/Screen allows you to

set the Time - Date, Day, Month, Year, choose

12/24 Hour Format, and even have an hourly

chime alert or toggle the button sound on/off.

Hold the ADJUST button for 3 seconds and then

the screen will flash. Scroll through the features

pressing the MODE button and press SELECT and

RESET to change the values.

Team Kick Off Reminder –Select the Home or

Away Team, smartly indicated with the whistle

icon for whichever Team wins the Kick Off of the

match, simply by pressing ADJUST for the Home

Team or SELECT for the Away Team. Easy!

Count-Down, Count-Up or Count Continue Timers –Select your choice by simply

pressing the RESET button.

Preset Match Timers –Select from 3, 5, 10, 12, 15, 20, 25, 30, 35, 40, 45, 60 and 90

minutes. Hold the SELECT button for 3 seconds and then the screen will flash. Scroll

through the Preset Timers by pressing the START/STOP button until you find your

choice. Press the ADJUST button to lock in your choice and return to the Match Day

Score Mode/Screen.

Selecting Home and Away team colours –

Hold the ADJUST button for 3 seconds and then

the screen will flash with the ‘H’ letter, allowing

you to select the Home Team colour.

Press the SELECT button to switch across to the

Away Team and the screen will flash with the ‘A’

letter allowing you to select the Away Team

colour.

Press the MODE button and the Preset Colour

Choices will flash.

Press the SELECT or RESET buttons to scroll

through them until you find your choice.

Press the ADJUST button to lock in your choice

and return to the Match Day Score

Mode/Screen.

When you scroll through the Preset Colour Choices, you will also see the ‘USER’ option.

This smart feature allows you to personalise the letters for your own choice; maybe

program it for team names like MAN v LIV or countries like ENG v USA or even people’s

names like KEV v JAS if you’re using the feature for some friendly fun competition!

When ‘USER’ is flashing, press the START/STOP button and the first digit/letter will flash.

Press the SELECT or RESET buttons to scroll through until you find your letter of choice.

Press the MODE button to switch across to the next letter and repeat the process.

Press the ADJUST button to lock in your choice and return to the Match Day Score

Mode/Screen.

NEW User Set Time - YOU choose your own

match length. If your match length is 17mins 30

secs then you can now program ANY TIME

yourself! Scrolling through the Preset Timers,

you will see one that says USER. Select this

option and program your time! Press the SELECT

button to increase the minutes and the RESET

button to decrease the minutes. Press the MODE

button to switch across to the seconds and

repeat the process.

SCORING OF THE MATCHES/GAMES IN THE

REFSCORER MATCH DAY SCORE MODE/SCREEN

Count Continue Timer Mode –for the Referee who

wants their timer to continue counting to 90 mins

after half time!

Select your match time from the extensive choice of

Preset Timers, or program your own with the NEW

User Set Time Feature.

Whether you choose the conventional 45 minutes

timer, or 5 minutes, or even program it yourself to 17

minutes and 30 seconds, at the end of the half, the

timer will pause, and upon restart for the second half,

the timer will continue counting UP the same amount

of minutes chosen, so to 90, 10 and 35 using the

three examples listed above!

When all the pre match information that you need has been programmed into the RefScorer

Digital Watch, and the Team Kick Off Reminder has been set just before you

blow your whistle to start the match/game, you’re now in RefScorer Match Day Mode -

The Timer has started and the match/game is in play!

When a goal/point is scored, simply press the ADJUST button to add a goal/point for the

Home Team and press the SELECT button to add a goal/point for the Away Team.

If you make a mistake, you can correct this and delete/erase a goal/point by pressing the

MODE button for the Home Team and the RESET button for the Away Team.

At Half Time, the timer will pause and the score stays on the screen. A short gentle press of

the RESET button resets the timer ready for the second half, but a long press and hold of the

RESET button will erase the score and time and reset the screen. (do this after Full Time!)

INTERVAL TRAINING TIMER MODE/SCREEN

This Mode/Feature can be used by Fitness

Coaches and Personal Trainers for HIIT

training, sprints and counting reps on

squats, lifts, pull ups or push ups etc.

1,2,3,4,5 and 10 minute preset timer

options are programmed in, plus you

have the option to choose your own

User Set Time too.

Hold the SELECT button for 3 seconds and then the screen will flash. Scroll through the

Preset Timers by pressing the START/STOP button until you find your choice.

Press the ADJUST button to lock in your choice and return to the Interval Training

Mode/Screen.

User Set Time - YOU choose your own training time. Scroll through the Preset Timers and

you will see one that says USER. Select this option and program your time! Press the

SELECT button to increase the minutes and the RESET button to decrease the minutes.

Press the MODE button to switch across to the seconds and repeat the process.

Press the ADJUST button to lock in your choice and return to the Interval Training

Mode/Screen.

Count-Down or Count-Up Timer –Select your choice by simply pressing the RESET button.

Press the START/STOP button to START the timer and press the SELECT button to count

the reps done.

When the timer runs out, the watch will beep and/or vibrate, and a short press of the

RESET button will prepare the timer to start again, keeping the score/reps recorded on

the screen.

To clear the screen and start again, hold down the RESET button for a long press of

around 3 seconds and this will erase the score/reps recorded.

PEDOMETER MODE/SCREEN

Measure Your Steps, Distance and Calorie

Tracking!

Daily Activity Goal - count and record your

steps each day and have it stored in memory

for a week!

To START the Pedometer Mode/Feature,

press the START/STOP button ensuring that

the screen displays PDM RUN.

If the screen reads PDM STP then the watch

will not record any data.

Programming the watch for your own Weight, Height and Stride.

Ensure the screen reads PDM STP and then hold the ADJUST button for 3 seconds and the the

screen will flash.

First program your WEIGHT, measured in KG. Press the SELECT button to increase the weight and

the RESET button to decrease the weight. Press the START/STOP button to switch across past the

decimal point and repeat the process.

Press the MODE button to now program your HEIGHT, measured in CM.

Press the MODE button to now program your STRIDE, measured in CM.

To measure your Stride (or Step Length), we suggest that you take 10 steps, measure the distance

from start to finish, and divide by 10. The result is your Stride Length.

*To program HEIGHT and STRIDE, repeat the steps above detailed when describing how to program

your WEIGHT.

Press the MODE button one more time to now program your GOAL for Daily Steps.

Press the SELECT button to increase the steps in increments of 1000 and press the RESET button to

decrease the steps chosen.

Press the ADJUST button to lock in your programmed selections and return to the Pedometer

Mode/Screen. Then remember to START the Pedometer Mode/Feature, press the START/STOP

button ensuring that the screen displays PDM RUN.

*With the screen displaying PDM RUN, press and hold the ADJUST button for 1-2 seconds, and the

screen will now show you the Recorded Daily Data.

Press the SELECT button to scroll through the Steps, Distance and Calorie Records for ‘d1’ (day 1).

Press the RESET button to switch to ‘d2’ (day 2) and scroll through the Records again with the

SELECT button. Repeat these steps to view the information stored for each day.

Press the ADJUST button once more to return to the Pedometer Mode/Screen.

STOPWATCH TIMER MODE/SCREEN

TO DOWNLOAD A MORE COMPREHENSIVE USER INSTRUCTION

INFORMATION MANUAL, AND ALSO VIEW OUR EASY TO

FOLLOW DEMONSTRATION VIDEOS ON OUR

RefStuff YouTube CHANNEL. PLEASE GO TO OUR WEBSITE:

WE HOPE THAT YOU ENJOY USING THE

RefScorer Digital Watch v2.021

Measured in 1/100 Second.

Press the START/STOP button to start the

Stopwatch.

Press the START/STOP button to pause the

Stopwatch.

To clear the screen and start again, hold

down the RESET button for a long press of

around 3 seconds and this will erase the

stopwatch timer screen.

Autres manuels pour RefScorer

Autres manuels RefStuff Montre

RefStuff

RefStuff RefScorer Manuel utilisateur

Manuels Montre populaires d'autres marques

Pandora

Pandora WATCH2 Manuel utilisateur

Casio

Casio QW-4343 Manuel utilisateur

Suunto

Suunto X6 Manuel utilisateur

Seiko

Seiko N830 Manuel utilisateur

MotionX

MotionX 365 Manuel utilisateur

Garmin

Garmin VENU SQ 2 Manuel utilisateur

QCY

QCY Watch GTC Manuel utilisateur

Canyon

Canyon Cindy CNE-KW41WP Manuel utilisateur

Esq

Esq Watches Guide d'installation

Crane

Crane AA5-CDSM-3A Manuel utilisateur

Timex

Timex W-214 Manuel utilisateur

DETOMASO

DETOMASO MATERA Manuel utilisateur

Geemarc

Geemarc Watch N Shake Manuel utilisateur

LORUS

LORUS W590 Manuel utilisateur

STENLILLE

STENLILLE Actío Manuel utilisateur

Casio

Casio 5594 Manuel utilisateur

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuel utilisateur

Slazenger

Slazenger SLZ800 Manuel utilisateur