Redrover True3Di SDM-190M Manuel utilisateur
SDM -19 0M
SDM-240
SDM-400
User Guide
2
High Resolution
Stereoscopic 3D Monitor
CONTENTS
3
4
True3Di
True3Di USER GUIDE
5
SYSTEM REQUIREMENTS
SPECIFICATIONS
1000
250
6
Hazardous Parts
True3Di USER GUIDE
7
● Do not dismantle, fix or modify the product.
▶ It may cause a fire and/or electric shock.
● Disconnect the power cable from the outlet and contact technical
support when the monitor makes unusual noises or smoke.
▶ It may cause a fire and/or electric shock.
● Do not install or place the monitor near oily, smoky, humid or wet
environments. Do not install or place the monitor inside vehicles.
▶ It may cause a fire and/or electric shock.
● Disconnect the power cable from the outlet and Contact technical
support when the monitor has been dropped, fallen or damaged.
▶ It may cause a fire and/or electric shock.
Warnings relating Power
※ Caution
● Graphic card
▶Quadro FX series for Open GL Stereo Software
▶ Geforce 6000 and 7000 series for DirectX Stereo Software
● As using two graphic cards
▶ Please use the same graphic cards for the Quadro FX series. If different
versions of the graphic cards are used, 3D stereo will not work properly.
● Insertion of second flat LCD Monitor
▶ Currently, True3Di uses the TN type LCD monitors, so please use of a IPS or S-PVA
type monitor for the second flat LCD monitor is recommended. It will be more
comfortable to use the monitor without being blocked.
True3Di USER GUIDE
8
● Disconnect the power cable from the outlet when lightning or thunder
is nearby or occurring.
▶ It may cause a fire and/or electric shock.
● Do not drag or move the monitor in any direction holding the power
cable or any other cables.
▶ It may cause damage on cables and cause a fire and/or electric shock.
● Do not use damaged or loose cables to power the monitor.
▶ It may cause a fire and/or electric shock.
● Do not touch cables with wet hands. Do not pull the power cable by
holding the cable.
▶ It may cause a fire and/or electric shock.
● Connect the cable with a ground plug.
▶ It may cause an lectric shock.
● Connect the power cable firmly and fully inserted.
▶ It may cause a fire.
● Do not bend the cable with force. Do not put heavy articles on top of
the cable.
▶ It may cause a fire and/or electric shock.
● Do not use more than one extension cord from one outlet.
▶ It may cause a fire.
True3Di USER GUIDE
9
● Do not install or place the monitor at the edge of the shelf. Make sure
the monitor is installed or placed fully inside the given space.
▶ It may drop or fall to cause damage or serious injury.
● Do not install or place the monitor where the given space is smaller
than the monitor or on unstable space.
▶ It may drop or fall to cause damage or serious injury.
● Do not install or place the monitor in common areas.
▶ It may cause distractions, damage or serious injury.
● Do not install or place the monitor close to any type of fires or
flammable/combustible articles.
▶ It may cause a fire or explosion.
● Do not install or place the monitor close to any type of high heat
generating articles or devices.
▶ It may cause a fire and/or electric shock.
● Do not install or place the monitor in a closed space.
▶ It may cause a fire.
● Handle the monitor gently with care.
▶ It may cause damage.
Warnings relating installation
True3Di USER GUIDE
10
● Install or place the monitor at least 10 cm (5 inch) from the wall for
optimum level of ventilation.
▶ It may reduce or damage the life of the parts or board.
● Disconnect the power cable and other connected cables if connected
from the outlet and monitor when removing the monitor to different
locations.
▶ It may cause an electric shock.
● Do not place any type of articles which contains chemical properties,
metal products, or wet articles.
▶ It may cause a fire and/or electric shock and damage the monitor.
● Do not insert or put any type of metal articles and any type of
flammable articles inside or on any input port of the monitor.
▶ It may cause a fire, electric shock and serious injury.
● Afterimages may remain on the screen when identical images are
being shown for a long period of time.
▶ Make sure to apply power saving mode or screen saving mode.
Warnings relating to usage
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Redrover Moniteur
