TWO YEAR WARRANTY
REDARC Electronics warrants to the original purchaser that the product(s) on the reverse side of this sheet ("Product") will be free, under normal
use and maintenance, from defects in material and wor manship for a period of TWO YEARS from the date of purchase, subject to the condi-
tions shown below.
1. Warranty
Unless otherwise stated in this warranty, Redarc Electronics will at its sole discretion either replace or repair any of the Product that is
defective in material or wor manship within the abovementioned period without charge to the original purchaser.
2. Other Warranty
Subject to any terms implied by law, this warranty contains the whole of the Redarc Electronics' obligations and any distributor and the
agents, officers and employees of such distributor and of Redarc Electronics are not authorised to vary or extend the terms of the war-
ranty. The benefits conferred by this warranty are in addition to the conditions and warranties implied by applicable legislation conferring
rights upon consumers, which apply only to the extent to which they may not by law be excluded.
3. Exclusions
This warranty shall not apply to, or include, any of the following:
3.1 Any defect or failure due to accident, misuse, abuse, movement of the Product to a new site, negligence, non-observance of
any of the instructions supplied with the Product including the instructions on the reverse side of this sheet ("Operating Instruc-
tions") or local regulations on the part of any user, choice of location, improper installation, configuration or connection, or
faulty power supply.
3.2 If the Product is installed, repaired or serviced by a person who is not a qualified auto electrician or electronics technician, or if
non-approved parts have been fitted.
3.3 Failure to obtain proper maintenance for the Product or any associated equipment or machinery.
3.4 Failure to pay for the products in full or comply with Redarc Electronics' Trading Terms.
3.5 If the Product is used other than for any reasonable purpose for which it was manufactured, or is used in a way not specified by
Redarc Electronics.
3.6 If the original purchaser sells, leases or otherwise parts with possession of the Product.
3.7 Deterioration due to normal use and exposure, including abnormal environmental conditions such as lightning stri e, flood and
extreme heat.
3.8 Any freight, pac ing and insurance expenses relating to transportation of the Product.
3.9 Any expenses relating to installation and/or removal of the Product.
3.10 Any damage, indirect or incidental, of whatever nature.
4. Limitations
4.1 Redarc Electronics is not liable for any consequential, indirect or accidental loss or damage or for any service not expressly
provided herein (including without limitation liability for any loss or damage caused by a fault in the Product or its external wiring
connections) and the liability of Redarc Electronics under this warranty is limited to the repair or replacement of defective
material or wor manship by a qualified auto electrician or electronics technician, provided such person and wor is approved
by Redarc prior to commencement. Subject to clause 2, Redarc Electronics is hereby excluded to the maximum extent permit-
ted by law from all other liability in respect of the Product.
4.2 While Redarc Electronics warrants, where applicable, that the Product is free from defects in materials and wor manship under
normal use at the time of delivery, Redarc Electronics does not warrant that the Product will meet any user specific requirements
or that the operation of the Product will be uninterrupted or error-free.
5. Owner’s Responsibilities
5.1 Maintenance of the Product and associated equipment and/or machinery is the responsibility of the owner. The owner must
retain evidence that proper maintenance has been performed on the Product by Redarc Electronics or a qualified auto
electrician or electronics technician. Claims made during the warranty term will not be accepted if resulting from lac of
maintenance rather than faulty material or wor manship.
5.2 The owner must operate the Product in accordance with all of the Operating Instructions.
5.3 Upon discovery of a fault the owner must return the Product to the distributor with full details of the nature of the fault. Removal
of the Product must be done by a qualified auto electrician or electronics technician to ensure that the warranty remains valid.
A written report describing the circumstances of failure must accompany the returned Product with proof of purchase which
clearly shows the date of such purchase by the original purchaser.
5.4 If the Product is found to be wor ing satisfactorily on return to Redarc Electronics a reasonable charge will be made for the cost
of testing, pac ing and freight. The Product will be returned on receipt of the amount charged.
FREE TECHNICAL ASSISTANCE, contact Redarc Electron cs
Ph (08) 8322 4848, Fax (08) 8387 2889
Specifications are subject to change without notification.
HBA1224
Handbrake Alarm.
FUNCTION
The HBA1224 alarm is used in a 12V or 24V automotive system. It monitors the handbra e switch
and the doorframe switch* to provide audible and visual warning if the door is opened while
the handbra e is not applied. Once the alarm starts, it stays latched on until the handbra e is
applied (even if the door is closed again). The HBA1224 improves vehicle safety as it:
• Reduces the ris of the vehicle being accidentally left un-attended without the
handbra e on.
• If used with external relay/horn, it can provide a warning to anyone in the general
area, that a vehicle has been left without it’s handbra e on.
*The doorframe switch is the switch mounted in the doorframe that switches on the cab light
when the door is opened.
FEATURES
• Compact size (50x30x25mm), with mounting tabs that can be drilled for screw
mounting.
• Internal audible warning (piezo buzzer).
• Internal visual warning (red LED).
• Ground output (0.5A max) for an optional external buzzer or relay, E.g. to sound the
vehicle horn.
• All alarms (visual, internal audible & external output) latch on until the handbra e is
applied.
• Options for ground or positive doorframe switch inputs.
• Options for ground or positive handbra e switch inputs.
R:\Redarc Product Spec Sheets NEW\Alarms\HBA1224 Instruction Sheet-A5-4.pub
