Redarc SBI12KIT Manuel utilisateur
FUNCTION
The Smart Start®Dual Battery Isolator & Wire Kit (part number
SBI12KIT) comes with everything required to install your Smart
Start®Dual Battery Isolator, including the Smart Start®itself.
Perfectly suited to the Do-It-Yourself installer, the SBI12KIT
requires no crimping or soldering, it’s just plug and play.
The SBI12KIT features high quality MTA 60 Amp fuses and fuse
holders with the corresponding ring terminals already attached to
the wires.
Please refer to the Smart Start®SBI Manual for more info.
WIRING INSTRUCTIONS
1. REMOVE Main Battery Earth *
2. Place fuses in fuse holders and attach red cables as shown in diagram A.
12V Dual Battery Isolator & Wire Kit
SBI12KIT
KIT CONTENTS
1. 200mm Battery Positive
cable (red)
2. 1800mm Battery Positive
cable (red)
3. Fuses (60A)
4. Fuse holders (incl.
mounting nuts)
5. Battery Terminals
6. Isolator Terminal protectors
7. SBI12 Battery Isolator
8. 750mm Auxiliary battery
ground cable (black)
9. Battery terminal protector
for Auxiliary Battery
Positive Terminal.
×2
×2
×2
×2
×2
×2
×1
×1
×1
1
2
4
3
Numbers refer to
the contents list
8
7
6
5
4
3
2
1
9
WIRING INSTRUCTIONS
3. Connect a Battery Positive cable (Cable 1) to one of the battery terminals as shown in
diagrams B, C & D. This terminal will attach to your Auxiliary Battery positive terminal.
4. Remove the Start Battery positive terminal from your Start Battery. Connect the other Battery
Positive cable (Cable 1) into the existing Battery Terminal from your Start Battery. Reconnect
the existing Battery Terminal to your Start Battery positive terminal.
5. Insert the crimped ends of the Battery Positive cables into the isolator terminal protectors
provided as per diagrams E, F & G.
6. Mount the SBI unit in a convenient location, as shown in diagram K. Redarc recommends
connecting the SBI as close as possible to the start battery.
7. Connect the SBI ground wire to chassis earth as shown in diagram L. Ensure a good
connection is made and any paint has been removed from the mounting location.
8. Connect the Ground terminal of the Auxiliary battery to chassis earth, using the 750mm
Auxiliary Battery ground cable and the other battery terminal provided as per diagrams
H, I & J.
1Strip wire
11
5
Insert wire
into battery
terminal
8Strip wire
88
5
Insert wire
into battery
terminal
2
6
2
6
2
6
WIRING INSTRUCTIONS
9. Wire the SBI12 as shown in diagrams M,N & O. Ensure that all connections are tight and that
the provided spring washers are used.
10. * RECONNECT MAIN BATTERY EARTH *
Nuts, Bolts and
Mounting Plate
not provided.
7
* MOUNT THE SBI12 *
7
Ensure ground
point makes a
good electrical
connection to
the negative
terminal of both
batteries.
* ATTACH THE EARTH WIRE *
7
6
6
2
27
6
6
6
6
WARSBI12KIT-3 EN
WARRANTY
LIMITED WARRANTY
For full warranty terms and conditions, visit the Warranty page of the REDARC website.
Refer to the web address and contact details applicable to your region.
AUSTRALIA, NEW ZEALAND & EUROPE
www.redarc.com.au/warranty
REDARC Electronics Pty Ltd
23 Brodie Road (North),
Lonsdale SA 5160
Australia
NORTH AMERICA
www.redarcelectronics.com/warranty
REDARC Corporation
c/o Shallco, Inc.
308 Component Dr.
Smithfield, NC 27577
USA
Australia +61 8 8322 4848
New Zealand +64-9-222-1024
UK & Europe +44 (0)20 3930 8109
USA +1 (704) 247-5150
Canada +1 (604) 260-5512
Mexico +52 (558) 526-2898
IMPORTER CONTACT INFORMATION
UK
Ozparts UK Ltd
1 Prospect Place
Pride Park
DE24 8HG, Derby
UK
Europe
Ozparts Pl sp. z o. o.
ul. Slowackiego 32/5
87−100 Torun
Poland
Design and specifications are subject to change without notice | Copyright © REDARC Electronics Pty Ltd. All rights reserved
REDARC®, THE POWER OF REDARC®, and BCDC® are trademarks of REDARC Electronics Pty Ltd.
Autres manuels pour SBI12KIT
4
Autres manuels Redarc Accessoires automobiles
Redarc
Redarc FK40 Manuel utilisateur
Redarc
Redarc EBRH-ACCV3-NA Manuel utilisateur
Redarc
Redarc TPH-004 Manuel utilisateur
Redarc
Redarc Redvision TVMS1280 Manuel utilisateur
Redarc
Redarc Tow-Pro Manuel utilisateur
Redarc
Redarc Redvision TVMS1280 Manuel utilisateur
Redarc
Redarc Tow-Pro Liberty EBRH-ACCNA Manuel utilisateur
Redarc
Redarc TPH-020 Manuel utilisateur
Redarc
Redarc RedVision TVMS1280-NA Manuel utilisateur
Redarc
Redarc TPH-013 Manuel utilisateur
