Red Technology MAGIC-2 Manuel utilisateur
1
REV. 100602
RED TECHNOLOGY
http://www.redt-magic-engraver.com
3F, 1314 Gwanpyeong-dong Yuseong-gu
Daejeon, Republic of Korea, 305-509
TEL:+82-70-7011-0905 FAX: +82-42-673-0905
2
Contents
Caution
Caution related to Electric Power
3
Caution in Installing
3
Caution in Using
4
Other Cautions
4
1. Product Configuration and Installation
5
- Parts
5
- Specification
6
- Program Installation
7
- Machine Installation
9
- MAGIC-2
10
- How to Use Vise
13
- Calibration
14
- Changing Tool
17
2. How to Use Program
18
- Tool Bar
20
- Object Properties
22
- Rotation Properties
23
- Tool Path Properties
23
-Tool Path Creation Creation
24
- Medal Marking
27
- Loading Image and Converting It to Engravable Image
33
- Importing Drawing from Illustrator or CorelDraw
35
3
Caution
Surely observe the below contents for safely using product
It is for user’s safety and preventing property damage
Please rightly use product after carefully reading the below matters
In the case of not observing operation instruction, it may result in bodily injury and
property loss.
In the case of not observing instruction, it may result in serious risk of injury on body
Caution related to Electric Power
Please don’t use damaged power code
or loose outlet
There may be the risk of electric shock
and fire
Please don’t use many plugs for one
outlet. Abnormal overheating of outlet
may cause fire
Please don’t pull out cord part of plug
and do not touch electric plug with wet
hands
In the case of not using plug for a
long time, please pull it out
During usage, if there is smoke, please
immediately switch engraving machine
off and then, contact our service center
Caution in Installing
Please don’t install it at places where
there are much oil, fume, humidity, and
dust with water sprinkler
There may be the risk of electric shock
and fire
Please don’t put candlelight,
cigarette, etc. on engraving
machine and also, please install it
at places away from heating
equipments such as heater, etc.
There may be the risk of trouble
and fire by overheated product
Please install engraving machine’s main
body on stable horizontal plane
This engraving machine weighs over
17kg, which may cause product damage
and user’s injury when it is used on
weak and inclined workstation because
it is vibrated sideways.
4
Caution in Using
While engraving machine is in operation,
cutter is rotated by high speed. Please never
put body part or other materials inside the
engraving machine
During engraving machine operation, high-
speed rotating cutter may cause serious
injury
Please don’t put materials, vessel
having water, small steel materials,
etc, on engraving machine
By worker's carelessness or vibration
occurring during engraving machine
operation, falling material may hurt
you and also, it may cause fire or
trouble by overheating or electric
leakage.
When water is flown in product, there
may be the risk of electric shock and
fire
Please don’t have body part or other
materials stuck in route along which
engraving machine’s each axis moves and
scratched by engraving blade
Body part or materials may be stuck in the
route along which engraving machine’s each
axis moves and sharp engraving blade
scratches them, which may cause risk of
serious injury, material damage, and product
trouble.
Other Cautions
Random disassembly or remodeling of
engraving machine’s main body
It may cause fire, electric shock, and
trouble.Make sure to inquire with local
dealer or our service center in checking,
adjusting, and repairing its internal
aspects
There is the risk of injury due to
curiosity and carelessness of infant
and young children
In the winter season with sub-zero
temperatures, product may malfunction. In
such case, if you use heater at place in
which engraving machine is operated, it
will functional normally. Please ensure that
the temperature of location at which the
engraving machine is used does not fall
below zero.
5
1. Product Configuration and Installation
Parts
The following accessories are included in the product package.
PART
NAME
FIGURE
QTY.
USAGE
Dragging
Tool
1 EA
Used to mark character or image on
metal surface.
Additional
Clamp
1 SET
Used to grip thick material like bottle.
Adapter
1 EA
Used to supply power to machine
(5.5mm x 2.1mm)
T-Wrench
1 EA
Used to change tool
2.5mm
USB Cable
1 EA
Used to connect the machine to PC
Software
CD
1 EA
Design and Maintenance software is
included.
Instruction
Manual
1 EA
User’s guide for the product
6
Product Specification
AC Input
100~240V, 50/60Hz
Power consumption
60W
External Dimension
260mm(W) × 233mm(H) × 325mm(D)
Workspace Size
123mm(X) x 90 mm(Y) x 30mm(Z)
Resolution
0.005mm (X,Y), 0.00125(Z)
Weight
18Kg
Feed Rate
1 –36mm/sec (XY), 1 –18mm/sec (Z)
Temperature
5 –40 ºC
Humidity
10 - 90 %
Usage
Metal Engraving
7
Program Installation
1. Press “Next”
2. By pressing “install”, program installation is
automatically started
3. During installing, file is copied to hard disk
4. By pressing “Finish”, program installation is
completed
5. When program installation is finished, USB driver
installation window is popped up. After pulling off USB
cable, confirm it and press “YES”
6. Press “NEXT”
7. By pressing “Finish”, installation is completed and
computer is re-booted
When installation is finished, the below icon is shown on desktop wallpaper. Explanation on the icon is as follow.
MagicArt
It is drawing software, which has functions such as engraving design,
engraving option tool path setup, tool path data transfer, etc.
8
Model Selection
When the program is run first after the installation, "Select Machine Model in Use" window will be popped up.
Select proper model in the list.
If serveral different models are being used, select all the models from the list.
※This option can be opened at menu, "Tool" -> "Select Machine Model in Use" whenever needed.
9
Machine Installation
MAGIC-2 is desktop CNC engraving machine and only when it is connected with PC and used together with
program, it can engrave.
USB cable, which is provided as part, is inserted to USB port of engraving machine’s left side and PC back or
front side.
[USB cable]
Connect to engraving machine Connect to PC or Laptop
Ce manuel convient aux modèles suivants
1
Table des matières
