Red-D-Arc PS-5 Manuel

- 1 -

RED-D-ARC

OPERATION & MAINTENANCE MANUAL

Support Roller PS-5

Capacity: 5000 KG

- 2 -

We hereby declare that the following product:

Description : SUPPORT ROLLER

Model : PS-5 (5000kg Capacity)

Serial No. : RDA WS 202109001/02/03/04/05/06

Satisfy the following Specific regulation:

2006/42/EC – Machinery Directive and its amendments

2006/95/EC – Low Voltage Directive and its amendments

2004/108/EC – EMC Directive and its amendments

- 3 -

WARNING

This machine can be injurious to yourself and others. Take precautions when

welding. Ask for your employer ’s safety practices which should be based on

manufacturer’s hazard data.

READ AND UNDERSTAND THE INSTRUCTION & SERVICE MANUAL

BEFORE INSTALLINGAND OPERATING.

PROTECT YOURSELF AND OTHERS!

ELECTRIC SHOCK can kill.

Install and earth the welding unit in accordance with applicable standards.

Do not touch live electrical parts or electrodes with bare skin, wet gloves

or wet clothing.

FUMES AND GASES can be dangerous to health.

Keep your head out of the fumes.

Use ventilation, extraction at the arc, or both, to keep fumes and gases

from your breathing zone and the general area.

ARC RAYS can injure eyes and burn skin.

Protect your eyes and body. Use the correct welding screen and filter lens

and wear protective clothing.

Protect bystanders with suitable screens or curtains.

NOISE can damage hearing.

Protect your ears. Use earmuffs or other hearing protection.

Warn bystanders of the risk.

- 4 -

INSTRUCTION MANUAL

1. SAFETY FUNCTIONS

Users of handling equipment have ultimate responsibility for ensuring that anyone who works

with or near the equipment observes all the relevant safety precautions.

The following recommendations should be observed in addition to the standard regulations that

apply to the work place.

All work must be carried out by trained personnel who are familiar with the operation of the

support roller. Incorrect operation of the equipment may lead to a hazardous situation which can

result in injury to the operator and damage to the equipment.

Staying under the work piece during the working cycle is absolutely forbidden! Staying on top of

the work piece during the working cycle is forbidden without the safety equipment!

1. Anyone who uses the support roller must be familiar with

its operation

the location of brake

its function

relevant safety precautions

To make this easier each screw, roller wheel is marked with a symbol that indicates its function

when activated.

2. The work place must

be suitable for the purpose

be free from loose objects

be clean, because dust and welding flux can make the frictional force of the support roller.

3. Personal safety equipment

always wear recommended personal safety equipment, such as safety glasses, flame-proof

clothing, safety gloves

do not wear loose-fitting items, such as scarves, bracelets, rings etc., which could become

trapped or cause burn.

NOTE! THE FUNCTION IS PHASE SENSITIVE!

CONDUCT DAILY INSPECT ON DEVICE BEFORE START.

WARNING INSTRUCTION ON OPERATOR’S MANUAL TO REMIND OPERATOR DURING

OPERATION.

- 5 -

2. INTRODUCTION

2.1 General

support roller is a basic solution for support of the work pieces. They occupy little space and

feature quick and easy to operate.

All models meet or exceed the EN occupational safety requirements.

1. Turning wheels 3. Traveling wheels.

2. Lifting screw by manual

2.2 Specification

Model

PS-5

Max capacity

5000 kg

Pipe diameter

250-762 mm

Rotation speed

rpm

Idler

Rotation power

Idler

Input voltage

- 6 -

3. INSTALLATION

IMPORTANT! READ ALL RELEVANT MANUALS AND SAFETY PRECAUTIONS CAREFULLY

BEFORE STARTING TO UNPACK AND INSTALL THE EQUIPMENT!

NOTE! MAKE SURE INSTALLATION IS CARRIED OUT BY SUITABLY TRAINED

PERSONNEL.

The support roller is shipped with fully assembled condition.

The location for installation should be level and able to take the required loading without

subsequent soil settlement.

Recommended lifting method by 2 lifting hooks via lifting lugs provided on both sides of the

support roller, use the 2 lifting lugs nearer to the table only.

Machine is ready for power “ON”.

Adjust the wheels position to meet the large diameter pipe.

3.1 Handling and Storage of the Machine

The machines are packed on a base, suitable for lifting by crane and/or forklift. Lift the

machine from the lifting points (lifting loops) only.

Unload the machine from the packing and check the outer condition. Do not store the

machine outside or in damp places.

- 7 -

4. STARTING-UP INSTRUCTIONS

4.1 Safety Consideration

This machine is to be operated by authorized and trained operator only.

Do not attempt to service the machine in the event of breakdown. Contact your

Service/Maintenance Department.

Do not wear loose clothing, as there are moving parts.

Safety practices on electrical hazards must be observed such as no wet hands, clothing and

properly insulated shoe.

Always keep a copy of the Manual in the Electrical Panel.

4.2 Daily Checks

Ensure that the work piece which was in the range of tank diameter.

Check that the traveling wheels is in good position.

Check that roller wheels free rotation are functioning.

Check the structure is working well and ensure the bolt no lose.

NOTE! PLUG FITS ONLY IN ONE POSITION.

DO NOT CONNECT THE WELDING RETURN CABLE THROUGH THE FRAME OF THE

ROLLER BED –THE BEARINGS AND THE CONTROL MAY BE DAMAGED.

Table des matières

Autres manuels Red-D-Arc Système de soudage

Red-D-Arc

Red-D-Arc ZR-8 Manuel utilisateur

Red-D-Arc

Red-D-Arc ZR-8 Manuel utilisateur

Red-D-Arc

Red-D-Arc IM803-B Manuel utilisateur

Red-D-Arc

Red-D-Arc LN-25 PRO EXTREME Manuel utilisateur

Red-D-Arc

Red-D-Arc EXTREME 360 CC/CV Auto-Line Manuel utilisateur

Red-D-Arc

Red-D-Arc EXTREME 360 MAP Auto-Line Manuel utilisateur

Red-D-Arc

Red-D-Arc D55OK HO Manuel utilisateur

Red-D-Arc

Red-D-Arc DC-400 Manuel utilisateur

Red-D-Arc

Red-D-Arc DC-600 Manuel utilisateur

Red-D-Arc

Red-D-Arc LN-25 PRO EXTREME Manuel utilisateur

Red-D-Arc

Red-D-Arc EXTREME 360 Manuel utilisateur

Red-D-Arc

Red-D-Arc E300 3+2 Manuel utilisateur

Red-D-Arc

Red-D-Arc D502K 5+2 Manuel utilisateur

Red-D-Arc

Red-D-Arc D503K 5+3 HO Manuel utilisateur

Red-D-Arc

Red-D-Arc EX350ie Manuel utilisateur

Red-D-Arc

Red-D-Arc FX360XL Manuel utilisateur

Red-D-Arc

Red-D-Arc SuitCase 12VS Manuel utilisateur

Red-D-Arc

Red-D-Arc PM 255 Manuel utilisateur

Red-D-Arc

Red-D-Arc EXTREME 360 Manuel utilisateur

Red-D-Arc

Red-D-Arc GX200 Manuel utilisateur

Red-D-Arc

Red-D-Arc LN-25x Manuel utilisateur

Red-D-Arc

Red-D-Arc D502K 5+4 Manuel utilisateur

Red-D-Arc

Red-D-Arc E300 Manuel utilisateur

Red-D-Arc

Red-D-Arc ZR-10 Manuel utilisateur

Manuels Système de soudage populaires d'autres marques

Berner

Berner PLASMACUT 54 Manuel utilisateur

Pro Spot

Pro Spot PR-155 Manuel utilisateur

Forney

Forney 210 Manuel utilisateur

Thermal Arc

Thermal Arc 400S Manuel utilisateur

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manuel utilisateur

GYS

GYS PROTIG 201 AC/DC Manuel utilisateur

TAFA

TAFA 30*8B35 Manuel utilisateur

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur

ESAB

ESAB Buddy Arc 145 Manuel utilisateur

CIGWELD

CIGWELD 636804 Guide rapide

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur

Elettro

Elettro HI-MIG 3000 SYNERGIC Manuel utilisateur

WIA

WIA Weldmatic 270 CP132-2 Manuel utilisateur

Sonics

Sonics H520T Manuel utilisateur

Miller

Miller Big Blue 400D Manuel utilisateur

NewArc

NewArc RT2000 Guide de démarrage rapide

Hypertherm

Hypertherm powermax1000 Manuel utilisateur

Lincoln Electric

Lincoln Electric POWER WAVE I400 Manuel utilisateur