Red-D-Arc RDA150T3 Manuel utilisateur

SERVICE MANUAL

WARNING

This equipment is designed and built with safety in mind. However, your overall

safety can be increased by your full understand followed by the content in this

manual.

Read this manual and familiarize yourself with its contents for your safety.

This equipment should only be operated and maintained by trained and qualified

personnel.

This equipment is designed for generating power source of electric tools, home

appliances and lights.

Do not install, operate or service this equipment without reading this manual and

unless you clearly understand this manual.

Specifications sub ect to change without notice.

File№ DGO-261_RDA150T3

This service manual is edited for authorized person to perform repair,

maintenance, and trouble-shooting to Diesel Engine Generator Welder,

Model Designation RDA150T3.

It is inevitably necessary to maintain and ad ust Red-D-Arc products

periodically in order to use fully and safely for long time. Therefore,

understand this service manual fully enough before use and proper

maintenance.

The information contained in this service manual describes equipment

available at the time of publication. While every attempt has been made to

give you the very latest information about your product, there may be some

differences between your equipment and the equipment described in this

manual. We reserve the right to make changes to equipments without prior

notice, and without obligation to make alterations to equipments previously

manufactured.

For service of the engine, refer to Workshop (Service) Manual provided by

the engine manufacturer described below.

MANUFACTURER

MODEL

KUBOTA V3800DI-TI

Table of Contents

1. Attention Statements

···············································································

2. General Safety Instructions

····································································

3. Specifications

·····························································································

4. General

········································································································

4-1 Appearance ······················································································ 5

4-2 Dimension ························································································ 5

5. General Par ts Description

······························································ 7

5.1 Equipment ························································································ 7

5.2 Main Parts and Feature ········································································ 10

5.3 Main omponent ················································································ 10

6. Ser vice Data

·······························································································

6.1 Service Data ····················································································· 13

6.2 Generator ························································································· 14

7. ightening orque

······················································································

8. Periodical Check for Engine

··························································· 19

9. rouble Shooting

························································································ 20

10. Wiring Diagram

············································································· 22

1. Attention Statements

・Technicians only who own enough knowledge and experience should work for

maintenance and operational check after maintenance.

・Before maintenance, always read this service manual as well as owner’s manual and

familiarize contents thoroughly before starting the service and maintenance of the

equipment for understanding of the equipment, safety instructions and cautions.

・

Throughout this manual are special attention statements.

A statement preceded by the triangular attention symbol and the word “WARNING”

contains information that should be acted upon to prevent serious bodily in ury.

A statement preceded by the triangular attention symbol and the word “CAUTION”

contains information that should be acted upon to prevent mechanical damage.

WARNING

CAU ION

2. General Safety Instructions

ELECTRIC SHOCK

NEVER touch the output terminals

during operation

NEVER touch the output terminal during

operation even though the breaker on the

load is being set at “OFF” position.

ALWAYS stop engine and make sure it

stopped before you will connect the loads to

the output terminals.

Suffocation by exhaust gas

NEVER run the engine indoors! Make

sure there is always good ventilation.

Fu es fro engine exhaust cause

serious injury.

ALWAYS operate the equipment in the

ventilated area.

When the equipment is used in a tunnel, hall

or any other indoor, the equipment for

ventilation must be used to prevent serious

accident caused by suffocation.

NEVER direct the exhaust fume to

houses nearby while considering the wind

flow direction.

Exhaust gas contains many harmful

elements that would cause affect to human.

Be free from suffocation when the

equipment is used in poorly ventilated area

such as inside of the building.

Entangled Injuries under

By Moving Componen

NEVER reach and touch the moving

component during operation!

ALWAYS stop the engine during inspection

to prevent serious bodily in ury by entangled

accident under moving component.

Electric shock/Injuries/Burns

Never inspect equipment during

use

Never serve and inspect when equipment is

being operated.

It may cause electric shock, in uries or

burns.

WARNING-Use good judgment

① NEVER run the engine when

transporting the equipment.

②

ALWAYS stop the equipment

immediately if it suddenly begins to

violate or abnormal noise. Inspect for

broken, missing or improperly installed

parts.

③

ALWAYS keep the equipment as clean

as practical. Keep it free of loose

vegetation, mud, etc.

DO NOT make unauthorized

modifications or alterations to this equipment

of any of its components. YAMABIKO must

authorize alterations and modifications in

writing. Unauthorized modifications or

alterations may alter the equipment

operation and could eopardize personal

safety during operation.

WARNING

Work Safely

Generators and welders operate at very high

speeds and can do serious damage or

in ury if they are misused or abused. Never

allow a person without training or instruction

to operate and serve this equipment!

Attention to CAUTION LABEL！

Caution labels are placed on this equipment

and it would request special attention for

operation. Make sure to locate the labels

and understand the content of the caution.

・Check the caution labels is legible. Always

keep the labels clean or replace them when

worn or damaged

・Clean the labels by cloth, water or

detergent and never use organic solvent or

gasoline which may cause label peel off due

to adhesive solvent.

・Make sure to replace the labels when

damaged and illegible.

Before replacing the label(s), make sure to

place the new label(s) in the same position.

STOP the equipment immediately when

abnormal circumstances are noticed!

STSTOP the equipment immediately whenever

abnormal circumstances are noticed such

as unusual noise, smell, vibration and etc.

It may lead serious accident or fatal damage

of the equipment or properties.

Inflammables！

Keep the equipment far away from fire such

as cigarettes when refueling fuel, oil or

battery fluid.

NEVER operate or service the equipment

nearby fire as the equipment may catch

fire.

No Modification！

NEVER modify the equipment without

manufacturer’s advanced approval. .

It may lead serious safety issue and damage

the equipment.

Inspect the equipment before engine

start for operation and periodical inspection

without fail！

Make sure to serve initial check before start

engine and periodical inspection for safety

and longer life of the equipment.

CAUTION

3. Specifications

Model U it RDA150T3

Alternator

Ge erati g Type - Rotati g Filed, Brushless 3-Phase

Sy chro ous Alter ator

Rated Output kVA 150

120

Voltage – Three phase V 208 / 480

Voltage – Si gle phase V 120 / 240 / 277

Amps

Three phase – 480V A 180

Three phase – 208V A

416

Si gle phase – 240V A

361 (zigzag)

Si gle phase – 120V A

361 x 2 (zigzag)

Rated Freque cy Hz 60

Wi di g - 3-phase, 4-wire

Star with eutral / Zig-zig

Power factor % 80

I sulatio class - F

Excitatio - Self-Excitatio (Brushless)

No. of poles - 4

Engine

Types - Vertical Water-cooled 4-cycle Diesel E gi e

Model (Ma ufacturer) - 6HK1 (ISUZU)

No. of Cyli ders (bore x stroke) (in. / mm) 6 ( 4.53x4.92 / 115x125 )

Co ti uous rated output kW 142

190

Rated speed

rpm

1800

Displaceme t cu.in. / liters 475.4 / 7.790

Combustio system - Direct Fuel I jectio with Turbo Charger

Cooli g method - Radiator

Lubricati g method - Forced lubricatio

Starti g method - Electric start

Fuel - Diesel

Lubrica t oil - CD class

Fuel ta k capacity gal. / liters 74 / 280

Lubrica t volume (Full) gal. / liters

10 / 38

Cooli g water volume gal. / liters

6.3 / 23.8

Starti g motor capacity V-kW 24 – 5.0

Chargi g dy amo capacity V-A 24 - 50

Battery - 105E41R x 2

Battery capacity V-AH 12(V) – 100AH

Unit

Le gth in. / mm 135.8 / 3450

Width in. / mm 48.8 / 1240

Height in. / mm 72.8 / 1850

Dry Weight lbs. / kg 6504 / 2950

I stalled Weight lbs. / kg 7187 / 3260

**Specifications subject to change without notice.

4. General

4.1 Appearance

4.2 Dimension

Unit in the drawings below is shows by mm.

. General Parts Description

5.1 Equipment

Table des matières

Autres manuels Red-D-Arc Générateur portable

Red-D-Arc

Red-D-Arc RDA60T3S Manuel utilisateur

Manuels Générateur portable populaires d'autres marques

Kohler

Kohler 20EORZ Mode d’emploi

Powerhorse

Powerhorse 83171 Manuel utilisateur

HURST

HURST ML-630-SI Manuel utilisateur

ETQ

ETQ TG4000 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton 40265 Guide de configuration

ConMed

ConMed 7550 Manuel utilisateur

Owon

Owon Waveform Generator Manuel utilisateur

evertz

evertz 7700 Series Manuel utilisateur

Power Stroke

Power Stroke PS906025 Manuel utilisateur

Firefly

Firefly Cygnus CYG2400/460/24 Manuel utilisateur

Draper

Draper PG950S Mise à jour du firmware

PowerBoss

PowerBoss PowerBoss Manuel utilisateur

SDMO

SDMO SH 4000 Manuel utilisateur

EINHELL

EINHELL STE 5500 Manuel utilisateur

Wanco

Wanco WI3000P Manuel utilisateur

Full Boar

Full Boar FBT-3300 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments ASG Manuel utilisateur

Westinghouse

Westinghouse WH1000i Series Manuel utilisateur