Reboot RBT-200PD/ACDC Manuel utilisateur
Version Number: RBT200P/ACDC-20210702A2
1
Operation Manual
Reboot RBT-200PD/ACDC welding machines adopts the latest pulse width modulation (PWM) technology
and insulated gate bipolar transistor (IGBT) power module, which can change work frequency to medium frequency
so as to replace the traditional Transistor transformer with the medium frequency transformer. its characterized with
portable, small size, light weight, low consumption and etc. It is also an intelligent and easy-to-operate multi-function
welding machine with MMA, DC TIG, AC TIG . It has the characteristics of strong welding performance and
diversified usage scenarios. Especially for welded aluminum and stainless steel,, and the welding effect is excellent.
It is highly praised by welding enthusiasts. It is also very friendly to beginners in welding and can quickly get started.
Part 1: Machine Introduction
1. Current display meter
The digital Ammeter is used to display the actual output current of the power source.
It is also used to display Parameters in Programming Mode.
Depending on the Programming Parameter selected, the status indictor adjacent to the Ammeter will
illuminate to show the units of the programming parameter.
When welding, the Ammeter will display actual welding current.
2. 2T/4T Mode selection
3. MMA/TIG Function selection
4. Function selection and digital adjustment.
Press once to select the function, and rotate to adjust the value.
Version Number: RBT200P/ACDC-20210702A2
2
5. AC/DC Mode selection
6. Positive Terminal
Positive Terminal. Welding current flows from the power source via heavy duty bayonet type terminals. It is
essential, however,that the male plug is inserted and turned securely to achieve a sound electrical
connection..
7. Gas connector.
Reliably connects with the connector of the TIG welding gun and plasma cutting gun.
8. Five core aviation socket
Tig gun switch control line connection, cutting gun switch control line connection and remote control foot
switch control line connection.
9. Negative Terminal
Negative Terminal. Reliably connects with the electrode holder / TIG welding gun and plasma cutting gun.
Part 2: Introduction to the product and configuration list
No.
Picture
Name
Qty
Remark
1
RBT-200PD/ACDC
1
Please check whether there are
scratches and breaks on the
outside of the whole machine,
and it can be started normally.
2
WP-17 Welding gun
1
4m WP-17 gun, 10-25
European style quick plug,
Trafimet quick plug, five-core
aviation plug.
3
Welding holder
1
3 meters 16MM2, 200A Italian
welding tongs +10-25
European quick plug
4
Ground wire pliers
1
3 meters, 16MM2, 300A
ground wire pliers + 10-25
European quick plug
5
Conversion line
1
Conversion line only suit for
220V to 110V dual-voltage
input machines, if not dual-
voltage machines no this line
included.
Version Number: RBT200P/ACDC-20210702A2
3
6
Gas tube
1
3m 8*12 transparent network
management.
7
Hose clamp
2
Used to fix the trachea to
prevent air leakage.
8
Collect body
3
Vulnerable parts, need to be
replaced frequently, please
prepare the goods
9
Collect
3
Vulnerable parts, need to be
replaced frequently, please
prepare the goods
10
Nozzle
3
Vulnerable parts, need to be
replaced frequently, please
prepare the goods
13
Manual
1
Normally provides manuals in
English, if you need other
language like French,
German, Italian, Spanish, and
Russian please contact us to
get electronic version
documents.
Part 3: Simple test for powering on the machine
Reboot RBT-200PD/ACDC Welding machines will be subjected to strict various tests when they leave the
factory to ensure that each welding machine that reaches the user is of high quality, because our machine has to go
through tens of thousands of kilometers of long-distance transportation from the factory to the delivery to you. It’s
inevitable that some uncontrollable factors will cause some internal components of the machine to become loose or
even damaged in the process. We recommend that you check the external device as soon as you get the welder, and
turn on the power to check to ensure that you receive It is a qualified product.
Precautions for power-on inspection:
1、Please make sure your power supply voltage is 110V+-15% or 220+-15%. REBOOT RBT-200P ACDC
supports 110V and 220V input voltage in North America and Japan; if you have a generator power supply,
please ensure that the generator is not less than 5000w..
2、It is recommended to choose 60A circuit breaker protection when your power supply voltage is 110V, and
Version Number: RBT200P/ACDC-20210702A2
4
30A circuit breaker protection when 220V..
3、Please choose the power plug that suits your local electrical law requirements.
4、Extension cord: #12 AWG or larger; 25’ (8m) or shorter.
Turn on the power switch of the machine and the fan on the back of the machine rotates, and the digital
display on the panel indicates that the power is normal.
Note:
1) The digital display shows irregular changes at the beginning, and then returns to the digital display after 3
seconds, which is normal.
2) In order to reduce the working temperature of the machine, it is normal for the fan to continue to rotate for a
few seconds after the power is turned off.
3) During high-strength continuous welding, machine protection may occur. After continuous heat dissipation,
the machine will return to normal, which is normal.
Attached table: Self-examination of abnormal conditions without response when turning on the machine:
1. The machine's power switch is not turned on.
2. The power input voltage is wrong.
3. The power plug is loose.
4. The internal circuit is loose (due to long-distance transportation, bumps), you need to open the cover and
check the internal connection line.
Part 4: Technical specifications
Description
RBT-200PD/ACDC
Weight
12 kg
Power Source Dimensions
L470mmxW155mmxH300mm
Fan Cooled
Cooling
Welder Type
Inverter Power Source
European Standards
EN 60974-1 / IEC 60974-1
Number of Phases
1
Nominal Supply Voltage
110V-220V ±15%
Nominal Supply Frequency
50/60Hz
Welding Current Range (MMA Mode)
AC110V:10-120A
AC220V:10-170A
Welding Current Range (TIG Mode)
AC110V:10-130A
AC220V:10-200A
Maximum Input Current
AC110V:I1max 47A
AC220V:I1max 31A
Effective Input Current
AC110V:I1eff 30A
Version Number: RBT200P/ACDC-20210702A2
5
AC220V:I1eff 19A
Single Phase Generator Requirement
10KVA
Duty cycle, 40ºC, 10 min (MMA)
AC110V:120A @ 35%, 25V
71A @ 100%, 23V
AC220V:170A @ 40%, 26.8V
108A @ 100%, 24.3V
Duty cycle, 40ºC, 10 min (TIG)
AC110V:130A @ 35%, 15.2V
77A @ 100%, 13V
AC220V:200A @ 40%, 18V
126A @ 100%, 15V
Open circuit voltage
(MMA/60V,TIG/60V)DC
Protection Class
IP23
Insulation Class
H
Part 5: Machine operation guidance.
Tips:
1. Wear a welding helmet fitted with a proper shade of filter to protect your face and eyes when welding or
watching;
2. Wear approved safety glasses. Side shields recommended;
3. Use protective screens or barriers to protect others from flash and glare; warn others not to watch the arc;
4. Wear protective clothing made from durable, flame-resistant material(wool and leather) and foot
protection;
5. Use approved ear plugs or ear muffs if noise level is high;
6. Never wear contact lenses while welding.
1、MMA mode
If you want to repair some broken fences or fix brackets, you like to use traditional welding rods for operation,
you can use Reboot RBT-200PD/ACDC MMA mode for welding.
Version Number: RBT200P/ACDC-20210702A2
6
1.1 Select “MMA” process.
1.2 Connect welding holder and ground clamp.
Version Number: RBT200P/ACDC-20210702A2
7
1.3 To adjust the current, only the current can be adjusted.
1. Hot Start Function reliably ignites the electrode and melts perfectly to ensure the best quality
even at the start of the seam. this solution makes lack of fusion and cold welds a thing of the past
and significantly reduces weld reinforcement. Adjust the hot start current here and the time here.
2. Arcforce Correction During the welding process, arcforce prevents the electrode sticking in the weld pool with
increases in current. this makes it easier to weld large-drop melting electrode types at low current strengths with
a short arc in particular
3. Anti-stick prevents the electrode from annealing. If the electrode sticks in spite of the arcrorce device, the
machine automatically switches over to the minimum current within about 1 second to prevent the electrode
from overheating. In order to easily separate the electrode and electrode holder to protect the welder.
Note:
1) The welding rod specification supported by Reboot RBT-200PD/ACDC is below 4.0(5/32in), usually 2.5(3/32in)
and 3.2(1/8in). European style generally uses E6013, American style generally uses E7018, and stainless
steel generally uses ER308.
2) It supports welding of 1-8mm(1/64-5/64in) carbon steel and 1-5mm(1/64-7/32in) stainless steel. Aluminum
can not be welded. For carbon steel, please use carbon steel electrode. For stainless steel, please use
stainless steel electrode.
3) Connect the ground clamp to clean bare metal. No rust, paint or other coatings, and ensure good electrical
conductivity.
4) The ideal distance between the welding rod and the welding object is 1-2mm(1/64-5/64in), to ensure that the
welding rod and the workpiece are in continuous and stable contact. The welding rod should not be too high
or pressed too low to avoid arc breaking and adhesion.
5) It is normal for novices to have adhesion during the welding process, and you can try to friction arc to avoid
adhesion.
6) Suitable for ordinary welding rods, such as 7018, 6013, etc., but not suitable for special welding rods, such as
7010, 7011.
Possible problems
1) There is no arc, check the ground wire to connect the workpiece to ensure that there is no rust, paint or other
coatings on the workpiece.
Version Number: RBT200P/ACDC-20210702A2
8
2) There is no arc, check the direct distance between the welding rod and the welding object, the ideal distance
is 1-2 mm; check whether the welding object has rust or oil stains, it is recommended to polish with sandpaper
or a grinder.
3) When welding, the spatter is very big, and it feels very difficult to weld. Please try to change the polarity
connection of the ground wire clamp and the welding clamp with the machine.
4) During the welding process, if the time exceeds 3 minutes, overcurrent protection may occur. You need to stop
working for a few minutes, let the machine cool down for a period of time, and automatically recover. If the air
cools for more than 10 minutes, the machine does not automatically recover, please shut down and restart.
5) If you have any problems that cannot be solved, please contact us .
2、TIG mode.
Reboot RBT-200PD/ACDC requires higher welding process for thin plates or welding with higher
process requirements, especially for the welding of stainless steel and aluminum. TIG/ACDC mode
can be used. In this mode, pure AR gas is required.
2.1 Select “ TIG ” process.
2.2 Connect Tig gun and ground clamp.
Version Number: RBT200P/ACDC-20210702A2
9
2.3 Connect the foot controller
1. This will light up when the foot controller is connected.
2. Connect the foot switch control wire.
2.4 Connect compressed air.
Note: Please refer to the digital sign on the rear panel of the machine for the input voltage, the wrong voltage will
damage the machine.
Version Number: RBT200P/ACDC-20210702A2
10
2.5 TIG DC mode.
Mainly welding carbon steel and stainless steel, long welding and spot welding are possible.
2.6 TIG AC mode
Mainly weld aluminum.
Table des matières
Autres manuels Reboot Système de soudage
Reboot
Reboot RBM2000P Manuel utilisateur
Reboot
Reboot RBM-1550 Manuel utilisateur
Reboot
Reboot RBM2100 Manuel utilisateur
Reboot
Reboot RBA1400 Manuel utilisateur
Reboot
Reboot RBM-2100D Manuel utilisateur
Reboot
Reboot CUT40 Manuel utilisateur
Reboot
Reboot ARC145 Manuel utilisateur
Reboot
Reboot RBM1600 Manuel utilisateur
Reboot
Reboot RBM1350 Manuel utilisateur
Manuels Système de soudage populaires d'autres marques
TAFA
TAFA 30*8B35 Manuel utilisateur
Lincoln Electric
Lincoln Electric INVERTEC V350-PRO CE Manuel utilisateur
ESAB
ESAB Buddy Arc 145 Manuel utilisateur
CIGWELD
CIGWELD 636804 Guide rapide
Red-D-Arc
Red-D-Arc DC-400 Manuel utilisateur
Hobart Welding Products
Hobart Welding Products Spool Gun DP 3035-10 Manuel utilisateur
