Ready Remote 24921 Guide de démarrage rapide
Model 24921
Owner’s/Installation Guide
iii
© 2010 Directed Electronics. All rights reserved.
Congratulations
Congratulations and thank you for purchasing one of our state-of-the-art
remote start systems. Directed is the world leader in vehicle security,
remote start, and keyless entry systems, so yes, you have made the
right choice!
STOP! Read this First
Please make sure you follow all the steps listed below before attempting
to install this system in your vehicle.
Step 1: Watch the instructional DVD included with this system.
Step 2: Read this guide from cover to cover.
Step 3: Register at www.readyremote.com to gain access to our ve-
hicle database. This provides you with the specific installa-
tion information for your vehicle and identifies any additional
hardware, if needed, to support the features you desire.
Step 4: Ensure you have, or can borrow the items listed in the Tools
Required section of this guide.
If you find that this installation is too difficult to perform, please visit
the Professional Installer Network section of the www.readyremote.com
web site or visit: www.proinstallation.com to contact one of our 7,000
authorized retailers to have the product professionally installed.
Caution! Failure to properly install this product may result in costly
damages, personal injury, or both.
iv © 2010 Directed Electronics. All rights reserved.
What's Included
• Control Module
• One 1- Button Remote Control
• Control Button (Valet Switch)
• Antenna and Cable
• Harnesses
• Hood Pin Switch
• Hardware Kit
• Neutral Safety Switch
• Bypass Module (24921B only)
• Your Warranty Registration Card
• DVD - Do-It-Yourself Installation Video
• This Guide
Tools Required
• Digital Multi-Meter
• Drill
• 1/4 Drill Bit (for hood pin switch)
• Screwdrivers (Phillips and Flathead)
• Wire Stripper
• Solder Iron
• Electrical Tape
• Pliers
• Crimping Tool
• Safety Glasses
Note: The installation tools listed above may be optional. The required
tools will vary depending on your vehicle.
v
© 2010 Directed Electronics. All rights reserved.
Important Information
Government Regulations and Safety Information
Read the Government Regulations and Warning! Safety
First sections of this guide prior to operating this system.
Warning! Failure to heed this information can result in
death, personal injury or property damage and may also
result in the illegal use of the system beyond its intended
purpose.
Your Warranty
Your system comes with a warranty. Your product warranty must be
validated following your purchase. You can validate online at: www.
prodregister.com/directed or complete and return the warranty regis-
tration card.
Replacement Remote Controls
If additional remote controls are desired, please see your authorized
dealer or visit us at www.readyremote.com to order. Your replacement
part number is 7111R (1-button).
Installation Guide
The installation guide included within is abbreviated. If more informa-
tion is required, please consult the expanded version which can be
found under On-line Tech Support at www.readyremote.com.
vi © 2010 Directed Electronics. All rights reserved.
Guide Translations
If you want a Spanish or French version of the Installation/Owners
Guide, please download it from www.readyremote.com and click on
On-Line Tech Support.
Estimado Cliente:
Si buscas los guías de instalación/del usario, por favor de bajar lo del
Soporte Técnico en-línea en el sitio www.readyremote.com
Cher consommateur:
Si vous désirez une version française ou espagnole du guide
d’utilisateur ou d’installation, veuillez s.v.p. le télécharger à l’adresse
suivante: www.readyremote.com en appuyant sur l’icône <<On-line
Tech Support>>.
Contents
Congratulations ............................................................................................... iii
STOP! Read this First ........................................................................................ iii
What's Included ............................................................................................ iv
Tools Required ................................................................................................. iv
Important Information ........................................................................................ v
Your Warranty .......................................................................................... v
Replacement Remote Controls ..................................................................... v
Installation Guide...................................................................................... v
Guide Translations ................................................................................... vi
Installation Guide ..............................................................................................2
Wiring Schematic .....................................................................................2
Wiring Connections ..........................................................................................3
Installation Points ..............................................................................................4
Virtual Tach ..............................................................................................4
Tach Learning ...........................................................................................5
Reset and Deletion ............................................................................................5
Remote Start Shutdown Diagnostics .....................................................................6
Programming System Features ............................................................................7
Feature Menu ...................................................................................................9
Remote Control Programming ...........................................................................10
Owner's Guide ..............................................................................................11
System Maintenance ...............................................................................11
Battery Replacement ................................................................................11
Using the system ...........................................................................................11
Car Finder .............................................................................................11
Remote Start ...........................................................................................11
Valet Take-Over ......................................................................................13
Government Regulations ..................................................................................14
Warning! Safety First .......................................................................................15
Caution .................................................................................................16
Safety Check ..................................................................................................16
Lifetime Consumer Warranty .............................................................................19
2© 2010 Directed Electronics. All rights reserved.
Installation Guide
Wiring Schematic
H1
Primary Harness
H2
Heavy
Gauge
Relay
Control Button
(Valet Switch)
Top View
Side View Side View
H3
Auxiliary Harness
Antenna
Antenna
LED (Programming
indicator)
Parking Light
Jumper
H1
Primary Harness
H2
Heavy
Gauge
Relay
Control Button
(Valet Switch)
Top View
Side View
Side View
H3
Auxiliary Harness
Antenna
Antenna
LED (Programming
indicator)
Parking Light
Jumper
H1
Primary Harness
H2
Heavy
Gauge
Relay
Control Button
(Valet Switch)
Top View
Side View
Side View
H3
Auxiliary Harness
Antenna
Antenna
LED (Programming
indicator)
Parking Light
Jumper
3
© 2010 Directed Electronics. All rights reserved.
Wiring Connections
Primary Harness (H1), 9-pin connector
H1/1 LIGHT GREEN BLACK (-) 200mA FACTORY ALARM DISARM
H1/2 GREEN/WHITE (-) 200mA FACTORY ALARM REARM
H1/3 EMPTY NOT USED
H1/4 WHITE/BLUE (-) ACTIVATION INPUT
H1/5 EMPTY NOT USED
H1/6 EMPTY NOT USED
H1/7 EMPTY NOT USED
H1/8 BLACK GROUND
H1/9 WHITE (+/-) LIGHT FLASH OUTPUT
Heavy Gauge Relay Harness (H2), 6-pin connector
H2/1 PINK OUTPUT TO PRIMARY IGNITION CIRCUIT, 30A (+)
H2/2 PURPLE OUTPUT TO STARTER CIRCUIT, 30A (+)
H2/3 ORANGE OUTPUT TO ACCESSORY CIRCUIT, 30A (+)
H2/4 RED (+) (30A) HIGH CURRENT 12V INPUT
H2/5 PINK/WHITE PROGRAMMABLE OUTPUT, 2ND IGNITION/ACCESSORY
CIRCUIT 30A
H2/6 RED (+) (30A) HIGH CURRENT 12V INPUT
Auxiliary Harness (H3), 5-pin connector
H3/1 BLACK/WHITE (-) NEUTRAL SAFETY SWITCH INPUT
H3/2 VIOLET/WHITE TACHOMETER INPUT WIRE
H3/3 BROWN (+) BRAKE SHUTDOWN INPUT WIRE
H3/4 GRAY (-) HOOD PIN SWITCH SHUTDOWN WIRE
H3/5 BLUE/WHITE (-) 200 mA STATUS/REAR DEFOGGER
4© 2010 Directed Electronics. All rights reserved.
Control Button (valet switch), 2-pin connector
1BLACK INPUT
2GREY OUTPUT
Installation Points
Note: The LED referenced within the installation section is the LED (pro-
gramming indicator) on the Control Module unless otherwise stated.
Virtual Tach
Note: Use of Virtual Tach does not require the Tach wire to be con-
nected.
To program Virtual Tach:
1. After the install is complete, remote start the engine. The program-
ming operation may require 3 cranks of the starter before the en-
gine starts and runs. Do not turn off the remote start if this happens,
it is a normal programming operation.
2. Once the engine begins running, let it run for at least 30 seconds.
3. Using the Remote, send the Remote start command to turn remote
start off. Virtual Tach is programmed.
Note: Virtual Tach is not recommended for diesel trucks.
Virtual Tach handles disengaging the starter motor during remote start-
ing – it does not address over-rev. For over-rev protection capability, the
tach wire must be connected.
Important: After successfully learning Virtual Tach, a small minority of
vehicle starters may over crank or under crank during remote start.
Virtual Tach fine tune can be adjusted, see Feature Menu and Program-
ming System Features.
Table des matières
Autres manuels Ready Remote Démarreur à distance
