RCA RLC3257A Manuel utilisateur
32” LCD Television
MODEL: RLC3257A
Contents
Contents
Caution
Safety Information
Unit and Accessories
Product Feature
Introduction
1. Front View
2. Rear View
4. Remote Control
Basic Operation
OSD Menu
1. Picture menu
2. Sound menu
3. Channel menu
4. Parental Control menu
5. Setup menu
6. Others menu
Simple Troubleshooting
2
3
4
4
5-9
5
6
8-9
10
11-17
11-12
13
14
15-16
17
18
19
20
3. Instruction for Wall Mount 7
12
LIMITED PRODUCT WARRANTY
1
Caution
2
Caution
is intended to alert the user to the presence of un-insulated "dangerous
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-
of-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling centre.
In the USA there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live
in!
This unit complies with America Safety directives.
This unit complies with FCC directives.
CERTIFIED TO CSA STD. C22.2 No.60065
3124140
Safety Information
3
Safety Information
Electrical safety
Physical safety
Unit and Accessories and Product Feature
Unit and Accessories
TV set
User's manual
Remote control
Batteries: 2xAAA
PICTURE SOUND SLEEP DISPLAY
INPUT
VOL+
VOL-
EXIT
MUTE
MENU
OK
CH+
CH-
123
456
789
0 -/--
FAV
CC EPG
MTS
Instructions for fixing stand
Instructions for
fixing stand
4
AC Power In
Introduction
Introduction
1. Front View
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red) Standby mode
Indicator on(Green) Power on mode
2). The functions of the buttons:
INPUT: Press to display the input source menu.
MENU: Press to display the OSD menu,
press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
POWER: Turn on/standby the TV set.
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 300to the left or right side and 200above or below the remote control
window.
Press INPUT button on the TV set or remote control to
display the input source menu, and use CH+/- button on
the TV set or / button on remote control to select the
input source, press OK button on the remote control to
enter.
Note: Before you select the input source, make sure the
connections are prepared.
MENU CH+CH-VOL+VOL-
INPUT MENU CH+CH-VOL+VOL-POWER
Power Indicator
Remote Control window (Keep clear)
5
Introduction
2. Rear View
Headphone out: Connect it to your headphone or audio equipments.
RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
COAX : Digital audio output.
: Connect it to the HDMI output of video device.
HDMI1/2/3
L/R in : Connect them to audio output of video device. (Shared with YPbPr)
AUDIO L/R out : Connect them to audio equipments.
VIDEO : Connect it to video output of video device.
USB(Service) : For service use only.
AC POWER IN: Connect it to AC100-240V~ 50/60Hz power supply with the mains cable.
SWITCH:
SWITCH
POWER ON/OFF and need to enlarge the position of this power switch to alert users to power on
this switch first prior to operate the product.
Coax RF VGA PC-IN HDMI1 HDMI2 HDMI3
USB
(Service)
R in L inVideo R
AUDIO OUT
L
YPb Pr RL
YPbPr : Connect them to the video output terminal of DVD.
L/R : Connect them to the audio output terminal of DVD
6
ON
After you connect the power cord into the power socket, make sure the power cord is
fully inserted into the unit. Then press the power ON/OFF switch to “ON” position as
shown left.
Introduction
3. Instruction for Wall Mount
-
- Do not mount your RCA TV at more than a 15 degree tilt.
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
The wall mount kit (not included) with your purchase allows you to mount your
RCA TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. RCA is not responsible for any damage to the product or injury to
yourself or others resulting from the wall-mounting.
- 4 pcs of type M6 screws are required for installing the wall mount bracket to
your RCA TV. Do not use screws that are longer than 10 mm. Screws that
are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. RCA is not liable for these kinds of
incidents
Dimensions for Mounting Hole Pattern
This RCA TV is compatible with a 400mm x 200mm mounting hole pattern.
400mm
200mm
7
Introduction
4. Remote Control
The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote
control may not work correctly if it is operated out of range or out of angle.
CC: Press to display the closed caption.
MTS: Press to select the audio channels.
FAV: Press to add or remove favorite channel.
EPG: Press to enter the EPG menu directly.
DISPLAY: Display the information of current mode.
Thumbstick( ): Allows you to navigate the on-screen
menus and adjust the system settings to your preference.
OK: CONFIRM button.
MENU: Press to display the OSD menu.
EXIT: Press to exit the OSD menu.
MUTE: Press to mute the sound, press again or press VOL+ to
unmute.
VOL+/-: Press to adjust the volume.
CH+/-: Press to scan through channels.
SLEEP : Shutdown timer.
Number Buttons: Choose channel directly.
Select channel 5, Press button "5";
Select channel 62, Press button "6", then press button "2" in 2
seconds;
Select channel 151, Press button "1", and press button "5" in 2
seconds, and press button "1" in 2 seconds;
Select channel 5-1, Press button "5", and press button "- / - -"
in 2 seconds, and press button "1" in 2 seconds;
PICTURE: Press repeatedly to cycle through the available
video picture modes.
SOUND: Press to cycle through the different sound settings.
PICTURE SOUND SLEEP DISPLAY
INPUT
VOL+
VOL-
EXIT
MUTE
MENU
OK
CH+
CH-
1 2 3
4 5 6
789
0 -/--
FAV
CC EPGMTS
(RETURN): Return to the previous channel viewed.
POWER(red button): Turn the TV on/standby.
INPUT: Press to display the input source menu.
8
Universal Remote Code:11359
Universal Remote Control not included.
Table des matières
Autres manuels RCA Téléviseur LCD
RCA
RCA LED40C45RQ Manuel utilisateur
RCA
RCA LED24G45RQ Manuel utilisateur
RCA
RCA L15D20 Manuel utilisateur
RCA
RCA 32LB30RQ Manuel utilisateur
RCA
RCA RT4038-C Manuel utilisateur
RCA
RCA SLD40A45RQ Manuel utilisateur
RCA
RCA LED55G55R120Q Manuel utilisateur
RCA
RCA 08A99 Manuel utilisateur
RCA
RCA LED32B30RQ Manuel utilisateur
RCA
RCA L37WD23 Manuel utilisateur
RCA
RCA 46LA45RQ Manuel utilisateur
RCA
RCA LED52B55R120Q Manuel utilisateur
RCA
RCA 32LA30RQ Manuel utilisateur
RCA
RCA LED42A45RQ Manuel utilisateur
RCA
RCA LED40G45RQ Manuel utilisateur
RCA
RCA l26wd26d - LCD HDTV w/ DVD Player Manuel utilisateur
RCA
RCA 42LB45RQ Manuel utilisateur
RCA
RCA L22HD41 - 22" LCD TV Guide de démarrage rapide
RCA
RCA LED60B55R120Q Manuel utilisateur
RCA
RCA 46LB45RQ Manuel utilisateur
