RCA ANT850E Manuel utilisateur

Versión

en español

al dorso

AMPLIFIED

OUTDOOR/ATTIC HD ANTENNA

INSTALLATION GUIDE

ANT850E IB 03

What’s in the package?

(1) UHF element (1) Antenna bracket

(5) M4x12 screws

(1) UHF/VHF combo box

(6) VHF element pieces

(1) Mounting base

(4) 1/4”x20 mounting screws

(1) Mast

(2) 1/4”x20 screws

(2) Hex Nuts

(2) Wing Nuts (1) Clamp

(1) 16ft coaxial cable

(1) Amplier insert

BEFORE YOU START!!!

Please read the IMPORTANT SAFETY INFORMATION sheet included in this package.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to this

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on another circuit.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Industry Canada Regulatory Information

CAN ICES-3 (B)/NMB-3 (B)

Avis d’Industrie Canada

CAN ICES-3 (B)/NMB-3 (B)

(1) Hardware bag

(1) M4x25 screw

A. Attach the antenna bracket to the UHF element.

UHF element, back

Antenna bracket, front

Antenna bracket, back

Antenna

bracket

UHF element

(3) M4x12 screws

Pieces Used:

Use the RCA Signal Finder App to nd the best

location for your antenna. (Optional)

In the Google Play or Apple App Stores, search for “RCA Signal Finder” and

look for the icon shown here. Then download and install the App.

Launch the App and follow the directions there to nd the best location and

orientation for your antenna.

Assemble the antenna.

M4x12 screws

Find the F-connectors on the

back of the UHF element and

front of the antenna bracket, as

shown here.

Insert the bracket’s bottom

connector into the UHF element’s

connector.

Insert 3 M4x12 screws into the

slots on the back of the bracket,

as shown here. Make sure the

slots are aligned with the holes

on the UHF element.

Screw the M4x12 screws into

place to secure the bracket to

the UHF element.

(1) M4x25 screw

B. Attach the UHF/VHF combo box to the antenna

bracket.

UHF element +

bracket, front

UHF/VHF combo box, back

UHF/VHF

combo box

UHF element

+ bracket

(2) M4x12

screws

Antenna bracket, back

Pieces Used:

Find the F-connectors on the back

of the UHF/VHF combo box and

the front of the antenna bracket, as

shown here.

Insert the combo box’s connector

into the antenna bracket’s

connector.

M4x12 screws Insert 2 M4x12 screws into the

slots on the back of the bracket, as

shown here. Make sure the slots

are aligned with the holes on the

combo box.

Screw the M4x12 screws into place

to secure the combo box to the

antenna bracket.

IMPORTANT: Make sure to place

the coaxial cable lead from the

combo box between the UHF

element and bracket.

M4x25 screw

Insert the 1 M4x25 screw into the slot on the back of

the bracket, as shown here.

Screw the M4x25 screw into place to secure the

bracket to the UHF element.

C. Connect the VHF dipoles to the UHF/VHF

combo box.

Assemble the antenna (continued).

Pieces Used:

UHF Element

+ Bracket +

Combo Box

(6) VHF element

pieces

Find the two longer VHF element pieces with

rounded ends. Insert the hollow end of one of these

VHF element pieces into the bottom hole on one

side of the combo box until it contacts the screw

threads inside this hole. Then screw this element

tightly into place.

Repeat with the second longer rounded-end VHF

element piece on the other side of the combo box.

Combo box,

front Combo box,

side

Long rounded-end VHF element piece

Combo box,

front

Combo box,

side

Long hollow-end VHF element piece

Find the two long hollow-end VHF element pieces.

Insert one end of each piece into the top holes on

either side of the combo box. Once the hollow end

contacts the screw threads inside this hole, screw

the element tightly into place. Then repeat with the

other long hollow-end VHF element piece.

Combo box, front Short rounded-end VHF element piece

The two remaining VHF element pieces should have

one rounded end and be slightly shorter than the

other rounded-end pieces.

Screw the threaded end of one of these VHF

element pieces into one of the installed hollow-end

VHF elements.

Repeat with the other remaining VHF element piece

on the other side of the combo box.

A. Mount the mounting base.

B. Secure the mast to the mounting base.

Mount the antenna.

Pieces Used:

(1) Mounting

base

(4) 1/4”x20

mounting

screws

WARNING: Never hang anything from this antenna; never attach foreign

objects to this antenna.

NOTE: In most cases, this antenna provides the best performance when

mounted outdoors in a high location (such as on the roof or high up on the

side of your house). This antenna can also be mounted in an attic.

Find the four mounting screws included in this

package. Using these screws, attach the base to

the surface as shown here.

Pieces Used:

(1) Mast

(2) 1/4”x20

mounting bolts

(2) Hex nuts

Insert the mast into the middle of the

mounting base as illustrated here. Then insert

one of the 1/4”x20 mounting bolts through

the bottom hole on the side of the mounting

base and mast as shown. Screw one of the

hex nuts onto the end of the bolt to hold the

mast and base together. Don’t tighten the nut

completely yet.

Insert the other 1/4”x20 mounting bolt through

the slot on the side of the mounting base and

mast as shown. Screw the second hex nuts

onto the end of the second bolt.

Position the mast so that it’s perpendicular to

the ground (plumb). Then tighten the two hex

nuts to hold the mast in this position.

C. Secure the antenna to the mast.

Connect to your TV.

Mount the antenna (continued).

Pieces Used:

(1) Clamp

(2) Wing

nuts

Place the mounting bolts

attached to the back of the

antenna bracket on either side

of the mounting mast.

Place the clamp over the

ends of the mounting bolts as

shown here.

Screw the wing nuts onto the

ends of the mounting bolts.

Tighten them so the clamp

holds the antenna on the

mast securely.

Antenna

bracket, back

Mast

Antenna

mounting bolts

Clamp

Antenna

lead

Coax

cable

Rain

boot

Pieces Used:

(1) 16ft coaxial

cable

(1) Amplier

insert

Connect one end of the included

coaxial cable to the antenna lead (if

you need a longer length of cable,

you can use your own RG6 coaxial

cable).

Once you’ve tightened the cable

onto the lead, lower the rain boot

over the connection to protect it

from water.

Connect the other end of the

coaxial cable to the ANT jack on the

supplied amplier insert.

ANTENNA

Water Damage Prevention:

At the point where your coaxial cable lead enters the house, you should allow for some slack in the coaxial

cable as a “drip loop.” This will prevent moisture from running down the coaxial cable and entering the

house.

Run the coaxial cable approximately six inches below the wall entry point and then turn it upwards

towards this spot. Any moisture that accumulates on the coaxial cable will drip off in the bend instead

of running into the house. You should seal the point where the cable enters your home with a rubber

weather insulator or silicone caulking (not included). An “F” connector wall plate can be used inside the

home to cover the inside portion of the hole. You can typically nd an “F” connector wall plate at any local

electronics or hardware store.

Connect the built-in coaxial cable on the amplier

insert to the antenna input jack on your TV or converter

box.

Note: If you want to split the signal coming from the

antenna, connect the short coaxial cable built into the

amplier insert to your splitter (splitter sold separately).

DO NOT PUT THE SIGNAL SPLITTER BETWEEN THE

AMPLIFIER INSERT AND THE ANTENNA.

After all other connections are made, connect the

power adapter into the amplier insert. Plug it into a

standard AC outlet.

Important: This power adapter should be plugged in so

that it stays vertical or lays at.

The amplier insert should always be located indoors.

TIP: The amplier has a switch that lets

you adjust the amount of amplication

applied for different TV signals. The 10dB

position is recommended for most situations. Try the

25dB for weaker signals.

ANTENNA

Most TVs have a channel scan option in their menu system, many times in a SETUP or CHANNEL

menu under ANTENNA. For detailed instructions on performing a channel scan, see the owner’s

manual that came with your TV.

Scan for channels on your TV.

12 Month Limited Warranty

Voxx Accessories Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product

or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from

the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s

option) without charge for parts and repair labor.

To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty

coverage (e.g. dated bill of sale), specication of defect(s), transportation prepaid, to an approved warranty station. For the

location of the nearest warranty station to you, call toll-free to our control ofce: 1-800-645-4994.

This Warranty is not transferable and does not cover product purchased, serviced or used outside the United States or Canada.

The Warranty does not extend to the elimination of externally generated static or noise. This Warranty does not apply to

costs incurred for installation, removal or reinstallation of the product, or, if in the Company’s opinion, the product has been

damaged through acts of nature, alteration, improper installation, mishandling, misuse, neglect, or accident. This Warranty

does not cover damage caused by an AC adapter not provided with the product.

THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT

PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY

PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS

WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED WARRANTY, MUST BE

BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY

BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is authorized to

assume for the Company any liability other than expressed herein in connection with the sale of this product.

Some states/provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of

incidental or consequential damage so the above limitations or exclusions may not apply to you. This Warranty gives you

specic legal rights and you may also have other rights which vary from state/province to state/province.

English

version

on back

Garantía Limitada de 12 Meses

Voxx Accessories Corporation (la “Compañía”) le garantiza a usted, el comprador original de este producto que si, bajo

condiciones y uso normales, se encontrara que este producto o alguna pieza presenta defectos materiales o de mano de obra

dentro de los primeros 12 meses a partir de la fecha de compra original, tales defectos serán reparados o reemplazados con un

producto nuevo o renovado (a opción de la Compañía) sin cargo alguno por las piezas y labores de reparación.

Para obtener los servicios de reparación o reemplazo dentro de los términos de esta garantía, el producto se entregará con

prueba de cubierta de garantía (por ejemplo, factura fechada de venta), especicación de los defectos, transporte prepagado,

a una estación de garantía aprobada. Para ubicar la estación de garantía más cercana a su domicilio, llame sin costo a nuestra

ocina de control: al 1-800-645-4994.

Esta Garantía no es transferible y no cubre un producto adquirido, mantenido o utilizado fuera de los Estados Unidos o Canadá.

Esta Garantía no incluye la eliminación de estática o ruido generados externamente. Esta Garantía no incluye los costos

incurridos en la instalación, remoción o reinstalación de este producto, o, si es opinión de la Compañía, que este producto

ha sufrido daños debido a causas de fuerza mayor, alteraciones, instalación inadecuada, abuso, uso indebido, negligencia o

accidente. Esta Garantía no incluye daños ocasionados por un adaptador de CA que no haya sido suministrado con el producto.

EL ALCANCE DE LA RESPONSABILIDAD DE LA COMPAÑÍA BAJO ESTA GARANTÍA ESTÁ LIMITADO A LA REPARACIÓN O EL

REEMPLAZO PROVISTO ARRIBA Y, EN NINGÚN CASO, DEBERÁ LA RESPONSABILIDAD DE LA COMPAÑÍA EXCEDER EL PRECIO

DE COMPRA PAGADO POR EL COMPRADOR DE ESTE PRODUCTO.

Esta Garantía reemplaza cualesquiera otras responsabilidades o garantías expresas. CUALESQUIERA GARANTÍAS IMPLÍCITAS,

INCLUYENDO CUALQUIER GARANTÍA IMPLÍCITA DE COMERCIABILIDAD O ADAPTABILIDAD PARA UN PROPÓSITO EN

PARTICULAR ESTARÁN LIMITADAS A LA DURACIÓN DE ESTA GARANTÍA. CUALQUIER ACCIÓN PARA EL INCUMPLIMIENTO DE

CUALQUIER GARANTÍA EN EL PRESENTE, INCLUYENDO CUALQUIER GARANTÍA IMPLÍCITA, DEBERÁ PRESENTARSE DENTRO

DE UN PERÍODO DE 24 MESES A PARTIR DE LA FECHA DE COMPRA ORIGINAL. EN NINGÚN CASO LA COMPAÑÍA SERÁ

RESPONSABLE POR DAÑOS EMERGENTES O INCIDENTALES. Ninguna persona ni representante está autorizado a asumir, a

nombre de la Compañía, ninguna responsabilidad salvo la expresada aquí en conexión con la venta de este producto.

Algunos estados/provincias no permiten limitaciones sobre la duración de una garantía implícita o la exclusión o la limitación

de daños incidentales o emergentes, de modo que es posible que las limitaciones o exclusiones anteriores no apliquen en

su caso. Esta Garantía le conere derechos legales especícos; según el estado/provincia, puede disfrutar además de otros

derechos.

ANTENNA

Cómo evitar el daño causado por el agua:

En el punto donde el cable coaxial entra a la casa, debe permitirse un poco de holgura en el cable coaxial

para que se forme un “bucle de goteo”. Con ello se impide que la humedad baje por el cable coaxial e

ingrese en la casa.

Tienda el cable coaxial a unas 6 pulgadas por debajo del punto de ingreso en la pared y luego dóblelo

hacia arriba hacia ese punto. Toda humedad que se acumule en el cable coaxial goteará en el punto

bajo del bucle en lugar de avanzar por el cable hacia el interior de la casa. Se recomienda usar caucho

impermeabilizante o silicona de calafateo (no se incluye) para sellar el punto de ingreso del cable a la

casa. Puede usar una placa de pared con conector F dentro de la casa para tapar la porción interior del

agujero. Generalmente, las placas de pared con conector F se venden en ferreterías o tiendas de artefactos

electrónicos.

Conecte el cable coaxial integrado del inserto para

amplicador en el conector de entrada de antena de su

TV o caja convertidora.

Aviso: Si desea dividir la señal proveniente de la

antena, conecte el cable coaxial corto integrado en

el inserto para amplicador en el divisor (éste se

vende por separado). NO COLOQUE EL DIVISOR DE

SEÑAL ENTRE EL INSERTO PARA AMPLIFICADOR Y LA

ANTENA.

Después de hacer todas las demás conexiones,

conecte el adaptador de corriente en el inserto para

amplicador. Enchúfelo en un tomacorriente de CA

estándar.

Importante: Este adaptador de corriente debe

enchufarse de manera que permanezca en posición

vertical o recostado.

El inserto para amplicador siempre debe instalarse en

espacios interiores.

CONSEJO: El amplicador tiene un

interruptor que le permite ajustar la

cantidad de amplicación aplicada para

las diferentes señales de TV. Se recomienda usar

la posición 10dB en la mayoría de las situaciones.

Intente la posición 25dB para las señales más

débiles.

ANTENNA

La mayoría de televisores tienen una opción para buscar canales en el sistema de menús,

frecuentemente como un menú de conguración (SETUP) o lista de canales (CHANNEL) bajo la

función de antena (ANTENNA). Para obtener instrucciones detalladas sobre cómo llevar a cabo una

búsqueda de canales, consulte el manual del propietario incluido con el TV.

Busque canales en su TV.

Table des matières

Autres manuels RCA Antenne

RCA

RCA ANT1150E Manuel utilisateur

RCA

RCA ANT3036W - ANT - TV Manuel

RCA

RCA ANT1400R Manuel utilisateur

RCA

RCA ANTB55E Manuel utilisateur

RCA

RCA CANT1650F Manuel utilisateur

RCA

RCA ANT3900 Manuel utilisateur

RCA

RCA ANT1500 Manuel utilisateur

RCA

RCA DIRECTV PLUS 15407690 Instructions de montage

RCA

RCA ANT1450 - HDTV / TV Manuel utilisateur

RCA

RCA ANT150 Manuel utilisateur

RCA

RCA ANT1251F Manuel utilisateur

RCA

RCA ANT3036XR Manuel utilisateur

RCA

RCA ANT3038XR Manuel utilisateur

RCA

RCA VH226F Manuel utilisateur

RCA

RCA CANT1400F Manuel utilisateur

RCA

RCA ANT525 - TV Antenna - Indoor Manuel utilisateur

RCA

RCA ANT111Z Manuel utilisateur

RCA

RCA ANT1ME Manuel utilisateur

RCA

RCA ANT1750E Manuel utilisateur

RCA

RCA VH126N Manuel utilisateur

RCA

RCA ANT705Z Manuel utilisateur

RCA

RCA ANT4WHE Manuel utilisateur

RCA

RCA ANT2ME Manuel utilisateur

RCA

RCA ANT1560E Manuel utilisateur

Manuels Antenne populaires d'autres marques

Alfa Network

Alfa Network APA-L01 Manuel utilisateur

Naval

Naval PR-422CA Manuel utilisateur

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur

TERK Technologies

TERK Technologies TV44 Manuel utilisateur

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur

HP J8999A Manuel utilisateur

MobilSat

MobilSat MSP-S Manuel utilisateur

Steren

Steren ANT-UHF 13 Manuel utilisateur

Novatel

Novatel 600-G Manuel d'utilisation

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuel utilisateur

TRENDnet

TRENDnet TEW-AO12O Manuel utilisateur

Radio Shack

Radio Shack 15-1837 Manuel utilisateur

CommScope

CommScope CMAX-OMFX-43M-I53 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics DAP25 Manuel utilisateur

COBHAM

COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien

Trango Systems

Trango Systems AD900-9 Manuel utilisateur

Steren

Steren ANT-100 Manuel utilisateur

Proxim

Proxim 5054-PA-23 Manuel utilisateur