Installation
Don’t use a power cord, a
plug or aloose socket
which is damaged.
• Otherwise, itmay cause a
fire or electricalshock.
Always ground the
product.
• There is risk of fire or
electric shock.
Do not modifyor extend
the power cable.
• There is risk offire or
electric shock.
Do not disassembleor
modify products.
• It maycause failure and
electric shock.
Always install the expansion
panel(s).
• Improper assemblyor
installation may causeincorrect
operation, including injury, fire,
and poor performance,electric
shock hazards.
Do not use the power cord
near flammable gas or
combustibles such asgaso-
-line, benzene,thinner,etc.
• It maycause explosion or
fire.
Operation
Do not placeheavy object
on the powercord and take
care so thatthe cord should
not be pressed.
Always install adedicated
circuit and breaker.
Do not touch(operate)the
product with wethands.
• There is danger of fire or
electric shock.
• Improper wiring or
installation may causefire
or electric shock
• There is risk of fire or
electrical shock.
WARNING
SAFETY PRECAUTIONS
Do not placethe power cord
near a heater.
• It may cause fire and
electric shock.
Do not allowwater to run
into electric parts.
• It willcause failure of
machine or electric shock.
Use a softcloth to clean.Do
not use wax,thinner, ora
strong detergent.
• The appearance of theair
conditioner may deteriorate,
change color,or develop
surface flaws.
If strange sounds, or small
or smoke comes from
product. Turn the breaker
off or disconnect the power
supply cable.
• There is risk ofelectric
shock or fire.
Do not open the suction
inlet grill of the product
during operation.
• Otherwise, it may electrical
shock and failure.
If water enters the product, turn
off the power switch of the
main body of appliance. Contact
service center after taking the
power-plug out from the socket.
22
