Raw Thrills Terminator Salvation Instruction manuelle

7HUPLQDWRU6DOYDWLRQ

Setup and Operations Manual

ϰϮĞůƵǆĞ

Service Manual Table of Contents

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉǇƌŝŐŚƚΞϮϬ10 T Asset Acquisition Company, LLC Page 2

Table of Contents

Safety ............................................................................................................................................................ 3

Product Specifications................................................................................................................................... 5

Setup ............................................................................................................................................................. 6

Adjustments, Audits and Diagnostics .........................................................................................................16

Maintenance (Including critical gun maintenance procdedure) ................................................................34

Wiring.......................................................................................................................................................... 37

Parts ............................................................................................................................................................42

Troubleshooting..........................................................................................................................................50

CoinUp®Operation Overview......................................................................................................................56

Forms ..........................................................................................................................................................65

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡϰϮĞůƵǆĞ'ĂŵĞ

Page 3 dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡ'ĂŵĞ^ŽĨƚǁĂƌĞŽƉǇƌŝŐŚƚΞϮϬϭϬWůĂǇDĞĐŚĂŶŝǆΡ/ŶĐůůƌŝŐŚƚƐƌĞƐĞƌǀĞĚ

Safety

OPERATION

Before operating game, read this manual. Failure to properly install and operate this game could result in

malfunction or accident. Operate the game in accordance with the manual.

TRANSPORTING

The cabinet is very heavy. Because the monitor is high, the cabinet is also very top-heavy. Use appropriate care

when moving or transporting cabinet. It contains fragile glass and electronic components. Avoid rough handling.

PROXIMITY TO NEON LIGHTS

Locating the cabinet near neon lights may reduce the ability of the IR sensors to accurately track the guns. It is

recommended that the cabinet be placed far away from neon lights or that any nearby neon lights be turned off.

HANDLING COMPONENTS

Many components are extremely sensitive to handling, environmental and Electrostatic Discharge (ESD) eventsͶ

especially the computer. Do not handle it roughly. Before servicing, call your distributor and inquire about the PC

warranty. Use proper ESD procedures when servicing. Protect components from harmful environmental

conditions, such as extreme temperatures, excessive moisture or other damaging effects.

DISCONNECT POWER

Always turn the power off and unplug the unit before servicing or making adjustments unless otherwise instructed.

Installing or repairing components while power is on can damage the components and void the warranty.

GROUNDING

Avoid electrical shock. Do not plug in AC power until you have inspected and properly grounded the unit. Only plug

into a grounded, three-ǁŝƌĞŽƵƚůĞƚŽŶŽƚƵƐĞĂĐŚĞĂƚĞƌƉůƵŐŽƌĐƵƚŽĨĨƚŚĞŐƌŽƵŶĚƉŝŶŽŶƚŚĞůŝŶĞĐŽƌĚ

ELECTRICAL SHOCKS

There is no isolation transformer in the cabinet. Disconnect AC power before servicing. However, be aware that

lethal voltages can remain in the electronic components even when AC power is disconnected. Use extreme

caution when servicing. Verify that there is a working ground connection. If the unit sustains water damage, cease

using it immediately and unplug AC power.

MONITOR

The monitor contains no user serviceable parts. Do not attempt to service the monitor.

POWER SELECTOR

Before installing game, ensure the voltage on the PC is set properly. There is a 115/230 VAC selector switch that

must be set for the correct voltage for your site. Verify the fluorescent lamp rating. The rating must match the line

voltage at the installation site.

POWER CORD

If the power cord is damaged or lost, replace it with an identical cord as supplied by the manufacturer or an

authorized service agent.

Service Manual Safety

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉǇƌŝŐŚƚΞϮϬ10 T Asset Acquisition Company, LLC Page 4

SURGE SUPRESSOR

/ƚŝƐƌĞĐŽŵŵĞŶĚĞĚƚŚĂƚǇŽƵƉůƵŐǇŽƵƌŐĂŵĞƐƉŽǁĞƌĐŽƌĚŝŶƚŽĂƐƵƌŐĞƐƵƉƉƌĞƐƐŽƌƚŽŚĞůƉƉƌŽƚĞĐƚĨƌŽŵƉŽǁĞƌ

surges that may damage sensitive electronic components.

CONNECTORS

Ensure all connectors mate properly. If connectors do not slip in easily, do not force them. Connectors are often

keyed and only connect one way. Check for correct orientation.

COMPUTER

The computer contains sensitive components, including a hard drive. Do not handle it roughly. Call your distributor

before servicing its internal components. Ask about warranty information as it relates to the PC.

Do not turn the PC power switch on or off. It should remain permanently in the ON position.

Cycle AC power on or off with the cabinet power switch.

A dongle has been inserted into one of the USB ports. This is required for game play.

Do not remove the dongle except for troubleshooting purposes.

FLUORESCENT TUBES

A dropped fluorescent tube may break and implode. Shattered glass from the implosion can travel long distances

and cause bodily injury. Use proper procedures when handling broken materials, as these items can contain

hazardous material such as mercury or lead.

HAZARD TO EPILEPTICS

A small portion of the population has an epileptic condition that may cause seizures. Affected persons experience

seizure while watching some television pictures or playing certain video games. People who have not had seizures

may still have an undetected epileptic condition. If anyone in your family has experienced epilepsy symptoms

(seizures or loss of awareness), consult your physical before using video games. While children play video games, a

parent should observe. Be alert to the following symptoms: dizziness, altered vision, eye or muscle twitching,

involuntary movements, loss of awareness, disorientation or convulsions. If you or your child experiences these

symptoms, discontinue use immediately and consult your physician.

MANUAL

Keep this manual available and ready for use. If the game fails to function properly, turn off the machine and

unplug the AC line cord. Contact your local distributor. Your warranty, when applicable, lasts 60 days from your

purchase date. You may not reproduce this document or any of its contents without written authorization from

Raw Thrills, Inc. or Play MechanixΡInc.

SPECIFICATIONS

&ŽƌƌĞĂƐŽŶƐƐƵĐŚĂƐƉĞƌĨŽƌŵĂŶĐĞƚŚŝƐƉƌŽĚƵĐƚƐƐƉĞĐŝĨŝĐĂƚŝŽŶƐŵĂǇĐŚĂŶŐĞǁŝƚŚŽƵƚŶŽƚŝĐĞ&ĞĚĞƌĂůƉĂƚĞŶƚ

equipment.

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡϰϮĞůƵǆĞ'ĂŵĞ

Page 5 dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡ'ĂŵĞ^ŽĨƚǁĂƌĞŽƉǇƌŝŐŚƚΞϮϬϭϬWůĂǇDĞĐŚĂŶŝǆΡ/ŶĐůůƌŝŐŚƚƐƌĞƐĞƌǀĞĚ

Product Specifications

Electrical Power

United States, international and Japan

120 VAC @ 60 Hz, 5 amps

240 VAC @ 50 Hz, 2.5 amps

100 VAC @ 50 Hz, 5 amps

DC Power Fuse Guide

+5 VDC 2 amp Slow Blow

+12 VDC 7 amp Slow Blow

Temperature

32° F to 100° F

(0° C to 38° C)

Humidity

Must not exceed 95% relative humidity

Dimensions

Height: 103.5;2.63 meters) with Terminator head affixed

Width: 47;1.19 meters)

Depth: 63;1.60 meters)

Carton Weight

Monitor assembly: 438 lbs. (199 kg)

Front pedestal: 192 lbs. (87 kg)

Service Manual Setup

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉǇƌŝŐŚƚΞϮϬ10 T Asset Acquisition Company, LLC Page 6

Setup

Unpack Materials

1. Place the shipping crates on a flat, stable surface.

2. Cut the banding straps and remove the cardboard lids.

3. Lift off the large cardboard containers surrounding the front pedestal and monitor assemblies

and remove any shipping cleats.

4. With at least two people, remove the front pedestal and monitor assemblies from the pallets.

5. Remove any additional banding from the monitor assembly.

6. Set aside the box with the Terminator head.

7. Set aside the box with the side caps.

8. Dispose of any bubble wrap and other packing materials.

9. Remove the coin door key from the coin return chute.

10. Open the top coin door.

11. Locate the key for the back door and the cash box door.

12. Open the cash box door and remove the cash box.

13. Remove the items inside the cash box, including this service manual, an AC line cord, a bag of

screws, nuts and tools and a warranty card.

14. With at least one assistant, roll the monitor assembly to a suitable playing area.

Note: keep the monitor assembly about eight inches from the wall.

PROXIMITY TO NEON LIGHTS

Locating the game cabinet near neon lights may reduce the ability of the IR sensors to accurately track the

guns. Place the cabinet far away from neon lights or turn off any nearby neon lights.

15. With at least one assistant, roll the front pedestal assembly about a foot in front of the monitor

assembly.

16. Remove packing material from the guns.

17. Check the AC line cord for visible signs of damage.

Pay particular attention to the plug and line cord insulation.

18. Open the boxes with the Terminator head and side caps and remove all items.

19. Check for shipping damage to the following:

xLeft and right guns, cables and decals

xCabinet glass: marquee and monitor

xCabinet decals, back door and coin door

xTerminator head assembly

xSide caps (two each of two types)

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡϰϮĞůƵǆĞ'ĂŵĞ

Page 7 dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡ'ĂŵĞ^ŽĨƚǁĂƌĞŽƉǇƌŝŐŚƚΞϮϬϭϬWůĂǇDĞĐŚĂŶŝǆΡ/ŶĐůůƌŝŐŚƚƐƌĞƐĞƌǀĞĚ

Check Electrical Settings

1. Verify the voltage in the nearest AC outlet.

2. Verify the AC outlet ground connection is present and working.

3. Open the back door of the monitor assembly.

4. Near the AC power transformer, verify that the voltage selector switch is set for the correct AC

voltage.

5. Route the line cord so that the plug is near the AC outlet.

6. Replace the back door of the monitor assembly.

7. Move the monitor assembly a few inches from the wall.

Assemble Terminator Head

1. Using a ladder and an assistant to hold the Terminator head assembly in place, lift the

component above rear of monitor assembly.

2. Attach the four-pin connector of the Terminator head assembly into its mate on the rear of the

monitor assembly.

Note: Do not force connector. If it does not connect easily, turn it 180 degrees and try again.

3. Align bracket of Terminator head assembly with the four holes in the top and on the angled back

of monitor assembly.

4. Affix a M¼-ϮϬǆϭďůĂĐŬTORX screw and a O¼-20 black flat washer by hand through each of

the two top holes.

Do not tighten screws.

5. Affix a MTORX screw and a Oflat washer by hand through each of the two holes on the angled

part of the bracket into the monitor assembly.

6. Tighten all screws with supplied TORX wrench.

Terminator Head Installation

Service Manual Setup

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉǇƌŝŐŚƚΞϮϬ10 T Asset Acquisition Company, LLC Page 8

Attach Front Pedestal to Monitor Assembly

1. Move front pedestal assembly a few inches away from the monitor assembly.

CONNECTORS

Ensure all connectors mate properly. If connectors do not slip in easily, do not force them.

Connectors are often keyed and only connect one way. Check for correct orientation.

2. Gently pull all connectors through the round holes in the front pedestal and monitor assembly.

3. Connect single-pin ground cable from monitor assembly to front pedestal.

4. Connect either USB cable from monitor assembly to either USB cable from front pedestal.

Note: the USB gun cables are interchangeable. The PC will decide which is the right and left gun.

5. Connect the 10-pin and 16-pin data/power connectors from the monitor assembly to their

mates from the front assembly

6. Move front pedestal so that it is flush with monitor assembly.

Caution: make sure cables are not pinched. Tuck them back through the round hole into either

cabinet.

7. Align holes in monitor assembly brackets with holes in rear of front pedestal assembly.

Adjust leg levelers on front pedestal assembly as needed.

Monitor Assembly to Front Pedestal Installation

8. Insert a MTORX screw and a Oflat washer by hand through each of the three holes at the front

of the left bracket into the three holes of the front pedestal.

Do not tighten screws.

9. Repeat with other bracket.

10. Tighten all screws with supplied TORX wrench.

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡϰϮĞůƵǆĞ'ĂŵĞ

Page 9 dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡ'ĂŵĞ^ŽĨƚǁĂƌĞŽƉǇƌŝŐŚƚΞϮϬϭϬWůĂǇDĞĐŚĂŶŝǆΡ/ŶĐůůƌŝŐŚƚƐƌĞƐĞƌǀĞĚ

Install Side Caps

Side Cap Installation (front pedestal unattached to show details)

1. Hold lower left side cap against left side of monitor so that all four holes in side cap align with

holes in left side wall of monitor.

Note that the lower left and upper right side (Type A) caps are interchangeable.

The lower right and upper left side caps (Type B) are interchangeable.

2. Insert a MTORX screw, a N¼-20 black lock washer and a Oflat washer by hand through each

of the four holes in side cap into side of monitor.

3. Tighten screws with TORX wrench.

4. Repeat for remaining three side caps.

5. Position game in desired final location.

6. Adjust leg levelers to lift caster wheels above floor and make game level.

Note: Use level to check that game is stable and that monitor is parallel to floor.

Service Manual Setup

dĞƌŵŝŶĂƚŽƌ^ĂůǀĂƚŝŽŶΡŽƉǇƌŝŐŚƚΞϮϬ10 T Asset Acquisition Company, LLC Page 10

Startup Game

1. Plug in line cord to AC outlet.

2. Turn the power switch to ON.

3. Verify that the cooling fan located on the bottom back of the game is working.

If not, turn off AC power and disconnect line cord. Refer to the diagnostic section of this manual.

4. Check that no component is excessively hot or emitting foul odors.

If not, turn off AC power and disconnect line cord. Refer to the diagnostic section of this manual.

5. Once software loads, you will be asked to calibrate the guns.

If not, enter the service menu by pressing the TEST button located on the bracket inside the top

coin door.

Note that gun maintenance procedure is listed on page 34.

Table des matières

Autres manuels Raw Thrills Machine de jeu d'arcade

Raw Thrills

Raw Thrills King Kong of Skull Island Manuel utilisateur

Raw Thrills

Raw Thrills Bust-a-Move Frenzy Manuel utilisateur

Raw Thrills

Raw Thrills Fast and Furious Arcade Manuel utilisateur

Raw Thrills

Raw Thrills PAC-MAN TICKET MANIA Manuel de référence

Raw Thrills

Raw Thrills Jurassic Park Arcade Manuel utilisateur

Raw Thrills

Raw Thrills Super Bikes 3 Manuel utilisateur

Raw Thrills

Raw Thrills Space Invaders Frenzy Manuel utilisateur

Raw Thrills

Raw Thrills King Kong of Skull Island II Manuel utilisateur

Raw Thrills

Raw Thrills Halo: Fireteam Raven Super Deluxe Manuel utilisateur

Raw Thrills

Raw Thrills Injustice Arcade Manuel utilisateur

Raw Thrills

Raw Thrills Teenage Mutant Ninja Turtles Manuel utilisateur

Manuels Machine de jeu d'arcade populaires d'autres marques

Universal Space

Universal Space COCONUT BASH Manuel utilisateur

Bay-Tek

Bay-Tek EVOLVE Manuel utilisateur

Global VR

Global VR America's Army Instructions d'installation et d'utilisation

Atronic

Atronic Cashline Manuel utilisateur

Universal Space

Universal Space Checky Monkey Manuel utilisateur

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Manuel utilisateur

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Manuel utilisateur

Family Fun Companies

Family Fun Companies Reactor Guide de démarrage rapide

Universal Space

Universal Space FRUIT MANIA Extreme Manuel utilisateur

falgas

falgas CARRUSEL FIESTA Manuel utilisateur

Konami

Konami DanceDanceRevolution Manuel utilisateur

Bay-Tek

Bay-Tek quik drop Manuel utilisateur

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Manuel utilisateur

Adrenaline

Adrenaline Flying Tickets Instructions d'installation et d'utilisation

Swinks

Swinks Stern Pinball Ghostbusters Manuel utilisateur

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Manuel utilisateur

jakar

jakar SPEED CARS Manuel utilisateur

Carmelli

Carmelli HAT TRICK NG1015H Manuel utilisateur