Ransomes ZT220D W/61 Mode d’emploi

SAFETY & OPERATION MANUAL

SIKKERHEDS- OG BETJENINGSMANUAL

Model: 942236 ZT220D W/61 REAR DISCHARGE

ZT220D W/61 REAR DISCHARGE

4122814-DK Rev. A

RJ100052003

ADVARSEL: Denne maskine kan forårsage alvorlig

personskade, hvis den bruges forkert. Alle, der bruger og

vedligeholder denne maskine, skal være kor-rekt uddannet

til dette, skal advares om farerne og læse hele

instruktionsbogen, før maskinen for beredes, bruges,

justeres eller serviceres.

RJ100052003

WARNING:Ifincorrectlyusedthismachinecancausesevere

injury. Those who use and maintain this machine should be

trained in its proper use, warned of its dangers and should

read the entire manual before attempting to set up, operate,

adjust or service the machine.

GB-1

ZT 220D

Series

3-2003

IMPORTANT MESSAGE

Thank you for purchasing this Ransomes product. You have purchased a world class mowing product, one of

the best designed and built anywhere.

ThismachinecomeswithanOperationandSafetyManualandaseparateSetup,PartsandMaintenanceManual.

Theusefullifeandgoodserviceyoureceivefromthismachinedependstoalargeextentonhowwellyoureadand

understand these manuals. Treat your machine properly, lubricate and adjust it as instructed, and it will give you

many years of reliable service.

Your safe use of this Ransomes product is one of our prime design objectives. Many safety features are built

in, but we also rely on your good sense and care to achieve accident-free operation. For best protection, study

the manuals thoroughly. Learn the proper operation of all controls. Observe all safety precautions. Follow all

instructions and warnings completely. Do not remove or defeat any safety features. Make sure those who

operate this machine are as well informed and careful in its use as you are.

SeeaRansomesdealerforanyserviceor partsneeded. Ransomesserviceensuresthatyou continuetoreceive

the best results possible from Ransomes’s products. You can trust Ransomes replacement parts because they

are manufactured with the same high precision and quality as the original parts.

Ransomes designs and builds its equipment to serve many years in a safe and productive manner. For longest

life, use this machine only as directed in the manuals, keep it in good repair and follow safety warnings and

instructions. You'll always be glad you did.

Jacobsen, a Textron Company

One Bob Cat Lane

Johnson Creek, WI 53038-0469

TABLE OF CONTENTS PAGE

SAFETY ...................................................................................................................................................... 2-7

LABELS..................................................................................................................................................... 8-12

CONTROLS ............................................................................................................................................ 13-15

OPERATION .......................................................................................................................................... 16, 17

MAINTENANCE CHART.............................................................................................................................. 18

MAINTENANCE RECORD .......................................................................................................................... 19

MAINTENANCE ...................................................................................................................................... 20-26

ADJUSTMENTS...................................................................................................................................... 27-31

BELT REPLACEMENT ................................................................................................................................ 32

VIBRATION LEVEL...................................................................................................................................... 33

GB-2

ZT 220D

Series

SAFETY

NOTICE !!!

Unauthorized modifications may present extreme

safety hazards to operators and bystanders and

could also result in product damage.

Jacobsen, a Textron Company strongly warns

against, rejects and disclaims any modifications,

add-on accessories or product alterations that are

not designed, developed, tested and approved by

Jacobsen Department. Any Jacobsen product that

is altered, modified or changed in any manner not

specifically authorized after original manufacture–

including the addition of “after-market” accessories

or component parts not specifically approved by

Jacobsen–willresultintheJacobsenWarrantybeing

voided.

Anyandallliabilityforpersonalinjuryand/orproperty

damage caused by any unauthorized modifications,

add-on accessories or products not approved by

Jacobsen will be considered the responsibility of the

individual(s) or company designing and/or making

such changes. Jacobsen will vigorously pursue full

indemnificationandcostsfromanypartyresponsible

for such unauthorized post-manufacture

modifications and/or accessories should personal

injury and/or property damage result.

MODEL NUMBER: This number appears on

sales literature, technical manuals and price lists.

SERIAL NUMBER: This number appears only

on your mower. It contains the model number

followed consecutively by the serial number. Use

this number when ordering parts or seeking

warrantyinformation.

OPERATION TRAINING VIDEO:

Part Number Description

2810594 VIDEO-BOBCAT 100/200

This symbol means:

ATTENTION!

BECOME ALERT!

Your safety and the safety of others is involved.

Signal word definitions:

The signal words below are used to identify levels

of hazard seriousness. These words appear in this

manual and on the safety labels attached to

Jacobsenmachines.Foryoursafetyandthesafety

ofothers,readandfollowtheinformationgivenwith

thesesignalwordsand/orthesymbolshownabove.

DANGER indicates an imminently hazardous

situationwhich, ifnot avoided,WILL result in death

or serious injury.

WARNING indicates a potentially hazardous

situation which, if not avoided, COULD result in

death or serious injury.

CAUTION indicates a potentially hazardous

situation which, if not avoided, MAY result in minor

or moderate injury. It may also be used to alert

against unsafe practices or property damage.

CAUTION used without the safety alert symbol

indicates a potentially hazardous situation which, if

not avoided, MAY result in property damage.

GB-3

ZT 220D

Series SAFETY

– Clear the area to be mowed of objects such as

rocks, toys, wire or other debris that may be

picked up or thrown by the mower.

– Be sure the area is clear of pets and people,

especially young children. Never assume they will

remain where you last saw them. Stop the

machine if any enter the area.

– Mow only in daylight or in good artificial light.

– Do not mow wet grass as tires may lose traction.

Machine preparation

– Check operator present interlock system and

brake operation. Adjust or repair any problems

before using.

– Do not tamper with or defeat safety devices.

Keep guards, shields and interlock safety devices

in place and in proper working condition. They

are for your protection.

– Keep all fasteners such as nuts, bolts and pins

well secured.

– Visually inspect blades, blade bolts and the cutter

assembly for wear or damage. Replace worn or

damaged blades and bolts to preserve balance.

– Verify that machine and attachments, if any, are

in good operating condition.

– Do not engage blades until ready to mow.

PREPARING FOR SAFE OPERATION

Operator preparation and training

Read the Operation & Safety

Manual

– If an operator or mechanic

cannot read English or one

of the other languages in

which this manual is

supplied, it is the owner's

responsibility to explain this material to them. If

any portion of this material is unclear, contact

your factory representative for clarification.

– Become familiar with the safe operation of the

equipment, operator controls and safety signs.

Do not operate or allow another person to

operate this machine if there are any questions

about safety.

– All operators and mechanics should be trained.

The owner is responsible for training the users.

– Wear appropriate clothing, including long

trousers and safety goggles or safety glasses

with side shields when operating mower. Do not

operate barefoot or wearing open sandals. Long

hair, loose clothing or jewelry may get tangled in

moving parts.

– Wear hearing protection.

– Never allow underage children, unskilled or

improperly trained people to operate this

equipment. Local regulations can restrict the age

of the operator.

– Do not carry passengers, especially small

children. They may fall off and be seriously

injured.

– Keep warning labels and this operator's manual

legible and intact. Replacement labels and

manuals are available from the factory.

– Do not operate machine while under the influence

of drugs or alcohol.

– The owner/user can prevent and is responsible

for accidents or injuries occurring to themselves,

other people or property.

Site preparation and circumstances

– Evaluate the terrain to determine what

accessories and attachments are needed to

properly and safely perform the job. Only use

accessories and attachments approved by the

manufacturer.

All rotary lawnmowers are potentially

dangerous.They canamputatehandsand

feet and throw objects. Failure to follow

these safety and operating instructions

could result in serious injury or death.

WARNING

GB-4

ZT 220D

Series

SAFETY

OPERATING SAFELY

In general

– Use extra care when loading or unloading the

machine into a trailer or truck.

– Watch out for traffic when near or crossing

roadways.

– Do not run the engine in an enclosed area where

dangerous carbon monoxide fumes can collect.

– Do not place your foot on the ground while

operating the machine.

– Before operating, lower the discharge chute,

install the mulcher or put the entire grass catcher

in place.

– Keep clear of the discharge opening at all times.

Never direct the discharge toward a bystander.

Stop operation if someone approaches.

– Keep washout ports and other mower housing

service openings closed when mowing.

– Use care when pulling loads or using heavy

equipment.

- Use only approved drawbar hitch points.

- Limit loads to those you can safely control.

- Do not turn sharply. Use care when reversing.

- Use counterweight(s) or wheel weights when

suggested in the operator's manual.

– Never leave a machine unattended. Always turn

off blades, set parking brake, stop engine and

remove keys before dismounting.

Starting

– Start only according to instructions in this

manual or on the machine.

– Before attempting to start the engine, make

sure:

- the parking brake is on,

- the PTO is disengaged;

- the traction drive is in NEUTRAL.

– When starting the engine, make sure hands and

feet are clear of the blades.

– Do not start the machine while standing in front

of the discharge chute or with the chute directed

at someone.

– Do not engage PTO at full throttle. Throttle to

idle or lowest possible engine speed.

– Do not change engine governor settings or

overspeed the engine. Operating the engine at

excessive speed can increase the hazard of

personal injury.

Interrupting operation

– Before leaving the operator's position:

- Park on level ground.

- Disengage the PTO.

- Set the parking brake.

- Shut off the engine and remove the key.

– Disengage the PTO and wait until the blades

quit rotating:

- before raising cutterdeck;

- when not mowing;

- for transport;

- when crossing surfaces other than grass.

– Stop the engine, disengage the PTO and wait

until the blades quit rotating:

- before refueling;

- before removing grass catcher;

- before making height adjustment unless the

adjustment can be made from the operator's

position.

– Stop the engine, disengage the PTO and

disconnect the spark plug wire(s) or remove the

key:

- before clearing blockages or unclogging chute;

- before checking, cleaning or working on the

machine;

- after striking a foreign object. Inspect the

machine for damage and make repairs before

restarting.

- if the machine begins to vibrate abnormally:

Inspect and make repairs as needed before

restarting;

- except for repairs or adjustments as

specifically noted, such as for carburetor

adjustment, where the engine must be

running. Keep hands and feet clear of moving

parts in these circumstances.

– Allow the blades to come to a complete stop

when stopping operation to clear blockages,

unclog, inspect the machine, do maintenance or

repair.

– Reduce the throttle setting during engine shut-

down and, if the engine is provided with a shut-

off valve, turn the fuel off at the conclusion of

mowing.

GB-5

ZT 220D

Series

MANEUVERING SAFELY

In general

– Slow down before turning.

– Do not mow in reverse unless absolutely

necessary. Always look behind and down for

small children and pets before and during

backing.

– Be aware when approaching blind corners,

shrubs, trees, tall grass or other objects that may

obscure vision.

– If tires lose traction, disengage the blades. If on

a slope, head down.

Mowing slopes

Slopes are a major factor in loss-of-control and

tipover accidents that sometimes lead to severe

injury or death. All slopes require extra caution.

– Do not mow on slopes if uneasy or uncertain.

Ultimate reponsibility for safe operation on

slopes rests with the operator.

– Do not mow excessively steep slopes.

– With ride-on machines, mow up and down

slopes, not across, except for zero turn

machines. Zero turn machines should mow

across slopes.

– With walk-behind machines, always mow across

slopes, not up and down.

– Avoid starting or stopping on a slope. If tires lose

traction, disengage the blades and proceed

slowly straight down the slope.

– With a zero turn machine, if tires lose traction

going down a slope, steering control may be

regained by speeding up.

– Mid-mount zero turns (belly mounted deck)

have much greater traction pointed up slope

than down slope. Be aware that traction may

be lost going down a slope. Do not operate a

mid-mount zero turn on slpoes it cannot back

up.

– Keep all movement on the slopes slow and

gradual. Do not make sudden changes in speed

or direction.

– Do not turn on slopes unless necessary, and

then turn slowly and downhill when possible.

– Stay away from slopes if the ground is loose or if

caught in the rain during mowing.

– Use lower speeds on a

slope to avoid stopping

or shifting.

– Use extra care with

grass catchers or other

attachments. These can

change the stability of

the machine.

– Avoid driving over ruts, holes, rocks and roots

whenever possible. Be alert to dips and rises.

Uneven terrain can overturn a mower or cause it

to slide.

– Do not mow dropoffs, ditches or embankments.

The machine could suddenly turn over if a wheel

runs over the edge or an edge caves in.

– Follow the manufacturer's recommendations for

wheel weights or counterweights to improve

stability.

Rollover Protection Structure (ROPS)

– A Rollover Protection Structure (ROPS) for this

tractor is available as an optional accessory.

Seat belts must be worn whenever a ROPS is

installed on the tractor. Always keep seat belt

snugly adjusted. DO NOT use seat belts on a

tractor without a ROPS.

– If a ROPS is installed and the tractor is

overturning, hold onto the steering wheel. Do

not attempt to jump out or leave the seat.

SAFETY

WARNING

GB-6

ZT 220D

Series

SAFETY

MAINTENANCESAFETY

In general

– Maintain machine according to manufacturer's

schedule and instructions for maximum safety

and best mowing results.

– Park machine on level ground.

– Never allow untrained personnel to service

machine.

– Adjust or repair only after the engine has been

stopped and the blades have quit rotating.

– Inspect grass catcher components regularly. If

worn, damaged or deteriorated, they may expose

moving parts or allow objects to be thrown.

– Replace parts if worn, damaged or faulty. For

best results, always replace with parts

recommended by the manufacturer.

– Disconnect battey or remove spark plug wire(s)

before making any repairs. Disconnect the

negative terminal first and the positive last.

Reconnect positive first and negative last.

– Do not dismantle the machine without releasing

or restraining forces which may cause parts to

movesuddenly.

– Provide adequate support for lifted machine or

parts if working beneath.

– Do not put hands or feet near or under rotating

parts.

– Clean up oil or fuel spillage thoroughly.

– Replace faulty mufflers.

– To reduce fire hazards, keep the engine, muffler,

battery compartment and fuel storage area free

of grass, leaves, debris buildup or grease.

Blades

– Mower blades are sharp and

can cut. Use extra caution

when handling. Remove

obstructions with care. Wrap

the blade(s) or wear gloves.

– Be aware that rotating one blade on

multiblade mowers can cause other blades to

rotate.

– Only replace blades. Never straighten or weld

them.

– Keep other persons away from blades.

Fuel

– Gasoline and diesel fuels are

flammable; gasoline vapors

are explosive. Use extra care

when handling.

– Store only in containers

specifically designed for fuel.

– When refueling or checking fuel level:

- Stop the engine and allow to cool;

- Do not smoke;

- Refuel outdoors only;

- Use a funnel;

- Do not overfill;

- If fuel is spilled, do not attempt to start the

engine until the spill is cleaned up and vapors

have cleared.

–Do not fill containers in a vehicle or on a truck or

trailer bed with a plastic liner. Fill containers on

the ground away from the vehicle.

–When practical, remove gas powered equip-

ment from the truck or trailer and refuel it on the

ground. If equipment must be refueled on the

truck or trailer, refuel from a portable container

rather than a dispenser nozzle.

–Keep the dispenser nozzle in contact with the

rim of the fuel tank or container opening until

fueling is complete. Do not use a nozzle lock-

open device

– Replace caps on fuel cans and tanks securely.

Hydraulic system

The machine's hydraulic

system operates under

high pressure.

– When checking for

leaks, do not use your

hands to attempt to

find a leak. Instead, use cardboard or paper.

– Escaping hydraulic fluid can be under sufficient

pressure to penetrate skin and cause serious

injury.

– If hydraulic fluid is injected into the skin, it must

be promptly removed by a doctor familiar with

this form of injury or gangrene may result.

– Check that all hydraulic fluid connections are

tight and all hydraulic hoses and lines are in

good condition before applying pressure to the

system.

WARNING

GB-7

ZT 220D

Series

Battery

Battery acid is caustic and fumes

are explosive and can cause

serious injury or death.

To reduce the risk of personal

injury when working near a

battery:

– When working with battery acid,

use protective equipment such

as, but not limited to, goggles, face shield,

rubber gloves and apron.

– Avoid leaning over a battery.

– Do not expose a battery to open flames or

sparks.

– Be sure batteries with filler caps are properly

filled with fluid.

– Do not allow battery acid to contact eyes or skin.

Flush any contacted area with water immediately

and get medical help.

– Charge batteries in an open, well ventilated

area, away from sparks and flames. Unplug

charger before connecting or disconnecting from

battery.

STORAGE SAFETY

– Stop the engine and allow to cool before storing.

– Drain the fuel tank outdoors only.

– Store fuel in an approved container in a cool, dry

place.

– Keep the machine and fuel containers in a

locked storage place to prevent tampering and

to keep children from playing with them.

– When the machine is to be parked, stored or left

unattended, lower the cutterdeck unless a

positive mechanical lock is used.

– Do not store the machine or fuel container near

heating appliances with an open flame such as a

water heater or an appliance with a pilot light.

– Keep gasoline storage area free of grass, leaves

and excessive grease to reduce fire hazard.

JUMP STARTING

1. Be sure the jumper cables are in good condition.

Turn off the ignition and all electrical accessories

on both machines.

2. Position the machine with a good (charged)

battery next to but not touching the machine with

the dead battery so jumper cables will reach.

3. When making cable connections:

- make sure the clamps do not touch anywhere

except to intended metal parts,

- Never connect a positive ("+" or red) terminal to

a negative ("–" or black) terminal.

- Make sure the cables won't get caught in any

parts after the engines are started.

4. Connect one end of the first jumper cable to the

positive terminal on one battery. Connect the

other end to the positive terminal on the other

battery.

5. Connect one end of the other cable to the

negative terminal of the machine with a good

(charged) battery. Make the final connection on

the engine of the machine to be started, away

from the battery.

6. Start the vehicle with the good battery, then the

machine with the discharged battery.

7. Remove the cables in the exact reverse order of

installation. When removing each clamp, take

care it does not touch any other metal parts while

the other end remains attached.

SAFETY

WARNING

GB-8

ZT 220D

Series

LABELS

2000655

Operation & Safety Manual

- Read and understand Operation & Safety Manual.

- Replace if lost or damaged.

2000700

Traction Control-Right Side

- Push lever forward for forward travel.

- Pull lever back for reverse travel.

- Move lever from neutral to the right for neutral

lock.

- Increased lever movement causes increased

speed.

4122658

Parking Brake

- Pull lever up to engage parking brake.

- Push lever down to release parking brake.

2000701

Traction Control-Left Side

- Push lever forward for forward travel.

- Pull lever back for reverse travel.

- Move lever from neutral to the left for neutral lock.

- Increased lever movement causes increased

speed.

Autres manuels pour ZT220D W/61

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Ransomes Tondeuse à gazon

Ransomes

Ransomes greens king IV 62289 Manuel utilisateur

Ransomes

Ransomes MP655 Manuel utilisateur

Ransomes

Ransomes HR380 Manuel utilisateur

Ransomes

Ransomes HIGHWAY 2130 Mode d’emploi

Ransomes

Ransomes 933308G Manuel utilisateur

Ransomes

Ransomes Mastiff 91 Mode d’emploi

Ransomes

Ransomes 951D 946900 Manuel d'utilisation et d'entretien

Ransomes

Ransomes M32 Manuel utilisateur

Ransomes

Ransomes 36 HYDRO Z-CONTROL MID-16HP KAW SIDE DISCHARGE SELF PROPELLED WALK BEHIND... Manuel utilisateur

Ransomes

Ransomes G - PLEX WD series Manuel de service

Ransomes

Ransomes MT503 Manuel utilisateur

Ransomes

Ransomes 51 Super Certes Manuel utilisateur

Ransomes

Ransomes 51 Super Certes Mode d’emploi

Ransomes

Ransomes HIGHWAY 2130 Mode d’emploi

Ransomes

Ransomes ZT220D W/61 Manuel utilisateur

Ransomes

Ransomes 933308G Manuel utilisateur

Ransomes

Ransomes Parkway 2250 Plus Mode d’emploi

Ransomes

Ransomes RMP655 Mode d’emploi

Ransomes

Ransomes Parkway 2250 Plus Mode d’emploi

Ransomes

Ransomes MP653 Manuel utilisateur

Ransomes

Ransomes HR380 Manuel utilisateur

Ransomes

Ransomes Matador 71 Manuel utilisateur

Ransomes

Ransomes Bob-Cat M21-4BZ Instructions d'installation

Ransomes

Ransomes HR3806 Mode d’emploi

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

MTD

MTD 795, 792, 791, 790 Manuel utilisateur

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

MTD

MTD 126-220-000 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur