Rane ONE Manuel utilisateur

Confidential Rane Service Manual

Rane

ONE

[NK49]

Service Manual

v1.0

The information in this document contains privileged and confidential information. It is intended only for the use of

those authorized by Rane. If you are not the authorized, intended recipient, you are hereby notified that any review,

dissemination, distribution or duplication of this document is strictly prohibited. If you are not authorized, please

contact Rane and destroy all copies of this document. You may contact Rane at support@rane.com.

ATTENTION!

This document contains sensitive proprietary information.

All recipients must have a current non-disclosure agreement on file

with Rane.

Do not make illegal copies of this document.

Confidential Rane Service Manual

Preface

This document is intended to assist the service technician in the operation, maintenance and repair of the Rane

device. Together with the User Reference Manual, this document provides a complete description of the

functionality and serviceability of the Device. Any comments or suggestions you may have pertaining to the

document are welcome and encouraged.

Read This!

In addition to any purchase price that Rane may charge as consideration for Rane selling or otherwise transferring

this service manual (“Manual”) to you, if you are not a service and repair facility (“Service Center”) authorized by

Rane in writing to be an authorized Service Center, Rane sells or transfers the Manual to you on the following terms

and conditions:

Only Service Centers authorized by Rane in writing are authorized to perform service and repairs covered by an

Rane warranty (if any), and transfer of the Manual to you does not authorize you to be an authorized Service Center.

Therefore, if you perform, or if the Manual is used to perform, any service or repairs on any Rane product or part

thereof, any and all warranties of Rane as to that product and any service contract with Rane for that product

shall be voided and shall no longer apply for such product, even if your services or repairs were done in

accordance with the Manual.

All service or repairs done by you or with reference to the Manual shall be solely your responsibility, and Rane shall

have no liability for any such repairs or service work. All such service or repairs are performed at the sole risk of

the person performing the service or repairs. You agree that all such work will be performed in a competent,

professional and safe manner at all times and to indemnify and fully hold Rane and its successors and assigns

harmless in the event of any failure to so perform.

Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of resale or other

transfer.

As the owner of the copyright to the Manual, Rane does not give you the right to copy the Manual, and you agree

not to copy the Manual without the written authorization of Rane. Rane has no obligation to provide to you any

correction of, or supplement to, the Manual, or any new or superseding version thereof.

Rane shall have the right to refuse to sell or otherwise transfer repair parts or materials to you in its sole discretion.

You shall not use, sell or otherwise transfer spare or replacement parts supplied by Rane to you (i) to repair or be

used in products manufactured for or by third parties or (ii) to any third parties for any purpose.

You shall not make any warranties or guarantees with respect to the products of Rane or the use thereof on behalf

of Rane or in your own name.

The foregoing describes the entire understanding related to sale or transfer of the Manual to you, and no other

terms shall apply unless in a writing signed by an authorized representative of Rane.

All Trademarks are property of their respective companies.

Confidential Rane Service Manual

Warnings

TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS PRODUCT TO WATER OR

MOISTURE.

The arrowhead symbol on a lightning flash inside a triangle is intended to alert the user to

the presence of uninsulated “dangerous voltage” within the enclosed product which may

be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point inside a triangle is intended to alert the user to the presence of

important operating, maintenance and servicing instructions in the literature which

accompanies the product.

REPAIR BY ANY PERSON OR ENTITY OTHER THAN AN AUTHORIZED RANE SERVICE CENTER WILL

VOID THE RANE WARRANTY.

PROVISION OF THIS MANUAL DOES NOT AUTHORIZE THE RECIPIENT TO COMPETE WITH ANY RANE

DISTRIBUTOR OR AUTHORIZED REPAIR SERVICE CENTER IN THE PROVISION OF REPAIR SERVICES

OR TO BE OR MAKE REPAIRS AS AN AUTHORIZED SERVICE CENTER.

ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED RANE SERVICE CENTER SHALL

BE SOLELY THE RESPONSIBILITY OF THAT ENTITY, AND RANE SHALL HAVE NO LIABILITY TO THAT

ENTITY OR TO ANY OTHER PARTY FOR ANY REPAIRS BY THAT ENTITY.

Regarding the Power Supply Fuse

Caution: The product under service may employ the use of a replaceable fuse. Danger of

fire or electrocution if fuse is incorrectly replaced. Replace with only the same type or

equivalent type recommended by the equipment manufacturer.

Regarding the Internal Battery

Caution: The product under service may employ the use of a internal battery. Danger of

explosion if battery is incorrectly replaced. Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used batteries according to the

manufacturer’s instruction.

Confidential Rane Service Manual

Safety Instructions

Carefully read the applicable items of the operating instructions and these safety suggestions before using this

product. Use extra care to follow the warnings written on the product itself and in the operating instructions. Keep

the operating instructions and safety suggestions for reference in the future.

1. Power Source. The product should only be connected to a power supply which is described either in the

operating instructions or in markings on the product.

2. Power Cord Protection. AC power supply cords should be placed such that no one is likely to step on the

cords and such that nothing will be placed on or against them.

3. Periods of Non-use. If the product is not used for any significant period of time, the product’s AC power supply

cord should be unplugged from the AC outlet.

4. Foreign Objects and Liquids. Take care not to allow liquids to spill or objects to fall into any openings of the

product.

5. Water or Moisture. The product should not be used near any water or in moisture.

6. Heat. Do not place the product near heat sources such as stoves, heat registers, radiators or other heat

producing equipment.

7. Ventilation. When installing the product, make sure that the product has adequate ventilation. Improperly

ventilating the product may cause overheating, which may damage the product.

8. Mounting. The product should only be used with a rack which the manufacturer recommends. The

combination of the product and rack should be moved carefully. Quick movements, excessive force or uneven

surfaces may overturn the combination which may damage the product and rack combination.

9. Cleaning. The product should only be cleaned as the manufacturer recommends.

10. Service. The user should only attempt the limited service or upkeep specifically described in the operating

instructions for the user. For any other service required, the product should be taken to an authorized service

center as described in the operating instructions.

11. Damage to the Product. Qualified service personnel should service the unit in certain situations including

without limitation when:

a. Liquid has spilled or objects have fallen into the product,

b. The product is exposed to water or excessive moisture,

c. The AC power supply plug or cord is damaged,

d. The product shows an inappropriate change in performance or does not operate normally, or

e. The enclosure of the product has been damaged.

SPECIFICATION

FUNCTION

1. Line/PC - (3-way toggle switch) [MIDI] Channels:

This selects playback audio to mix with. Audio in is always routed over USB directly to the computer

from the input When in

“PC 1” the audio will be routed from the software to the channel. This is for USB A host.

“Line” routes rear inputs to channels 1 & 2 of the mixer.

“PC 2” the audio will be routed from the software to the channel. This is for USB B host.

2. Gain – (270-degree Pot) [MIDI]:

This pot controls the gain for its associated channel on the mixer.

3. Treble – (270-degree Pot w/ Center Detent) [MIDI]:

This knob controls the high-end treble output of its associated channel on the mixer.

Full left is – infinity kill and right is +6db gain .

4. Mid – (270-degree Pot w/ Center Detent) [MIDI] :

This knob controls the Mid-range frequency of its associated channel on the mixer.

Full left is – infinity kill and right is +6db gain.

5. Bass – (270-degree Pot w/ Center Detent) [MIDI] :

This knob controls the low end bass frequencies of its associated channel on the mixer.

Full left is – infinity kill and right is +6db gain .

6. Filter (270-degree w/Center Detent) [MIDI] :

This center Detented knob acts as a low pass filter from center sweeping left and a high pass filter from center

sweeping right. A pre-determined amount of resonance will be applied. The filter will always be active but only

audible once it has been moved past its 12 o’clock positioning. This is spec’d as a hardware filter.

7. Channel Fader (45mm Slide Fader) [MIDI]:

This is the volume controller for the channel. Channel faders are not user replaceable.

8. Cross Fader [MIDI]:

This fader is for transitioning from Left assigned (A) Cross fader Deck Position to Right assigned (B) Cross

fader Position.

This is a user-removable cross fader so the mechanical design must be screwless around the fader but

still allow replacement.

The crossfader will also support standard faders as drop-in replacments. Innofader or Numark CP Pro.

SERVICE MANUAL

MODEL:ONE

9. Master Volume - (270-degree Rotary Pot) [analog]:

Controls the gain of the master outputs.

10. Booth Volume - (270-degree Rotary Pot) [analog]:

Controls the gain of the booth outputs.

11. Channel PFL/Cue– (Tact switch w/Red LED) [MIDI] – Activates PFL for selected channel.

Radio Style, Press and hold one PFL channel and pressing the other will turn both on.

12. UI Browser – plastic (360-degree Encoder and Push Switch) [MIDI]:

A standard detented encoder with push switch is used to navigate through the software.

The push switch will typically be used for selection and forward navigation through the UI.

The encoder will typically be used for

scrolling through item lists. Holding Shift +: Loads the current song in focus in the Prepare Window in the

software.

13. Back - (Tact switch with Red LED) [MIDI] :

Pressing this button will take the library focus back a step in the software.

Holding Shift +: Adds the current song in focus to the Prepare Window in the software.

LED State: always Dim

14. FX buttons 1-6 (Tact Switch with Red LED) (Qty: 6) [MIDI]:

These radio style buttons are used to select a software effect.

LED State: On Bright/Toggle Active flashing/Off Dim.

15. FX On/Off (3 Tact switch “paddle” spring loaded):

This is used to activate both hardware and software FX. Pushing up on the paddle will latch (lock) the FX in

the

on position. Pushing down on the paddle will turn the FX on momentarily. When the paddle is in the middle

position the FX are in the off state.

16. Tap (Tact switch white LED) [MIDI]:

This button is used to manually tap in the tempo in both software effects banks. Shift+ will reset the BPM

in the effects banks to whatever is embedded in the song.

17. FX Depth (270 rotary pot) [MIDI]: Adjusts the Level/Depth of all FX

18. Parameter Encoder (360 Rotary Encoder with Push):This will control hardware FX parameters.

19. SYNC (Tact Switch w/ blue LED) (plastic) [MIDI]:

This control is used to force the track to align with the other deck’s tempo and phase.

It is up to the software to either hard align or gently nudge it into place, depending on the Smart or

Simple Sync chosen from the settings.

The LED for this control will light when active. Shift + SYNC will deactivate Sync. LED’s On/Off.

20. Strip Search (Touch Strip with 8 Red LEDs) [MIDI] :

This constant force linear pot is used to allow the user to jump to any point within a track by touching

Anywhere along the strip. The LEDs will show time elapsed in relation to current song playing.

DISASSEMBLY PROCEDURES

1. REMOVAL OF TOP CABINET. (Fig.1)

(A) REMOVE THE 28 PCS KONB AND 2PCS ALUMI PLATTER AND 5PCS FADER CAP AND 26 PCS

HEXAGON NUT AND 26 PCS WASHER BEFORE REMOVAL OF TOP CABINET.

Fig.1

2.REMOVAL OF THE CROSS FADER . (Fig.2)

(A) REMOVE THE 4 PCS SCREWS BEFORE REMOVAL OF FIXED PLATE.

(B) REMOVE THE 4 PCS SCREWS AND 1PCS CONNECTOR BEFORE REMOVAL OF CROSS FADER .

Fig.2

3.REMOVAL OF THE FRONT PCB ASSEMBLY(SMT/DIP) AND RIHGT FRONT PCB DIP

ASSEMBLY AND BOTTOM CHASSIS. (Fig.3)

(A) REMOVE THE 44 PCS SCREWS BEFORE REMOVAL OF BOTTOM CHASSIS.

(B) REMOVE THE 4 PCS SCREWS AND 2 PCS COPPER AND 3 PCS CONNECTOR BEFORE REMOVAL OF FRONT

PCB(SMT/DIP) AND RIHGT FRONT PCB ASSEMBLY.

Fig.3

4.REMOVAL OF THE MAIN PCB ASSEMBLY(SMT/DIP)AND OPEN FRAME TYPE 28V/5.36A

AND DC FAN. (Fig.4)

(A) REMOVE THE 16 PCS SCREWS AND 9 PCS CONNECTOR AND 4 PCS COPPER BEFORE REMOVAL OF

MAIN PCB ASSEMBLY,(SMT/DIP).

(B) REMOVE THE 4 PCS SCREWS AND 4 PCS FLANGE SCREW NUT BEFORE REMOVAL OF DC FAN.

REMOVAL OF OPEN FRAME TYPE 28V/5.36A.

Fig.4

5.REMOVAL OF THE DD MOTOR AND START/STOP PCB DIP ASSEMBLY AND TOGGLE

SWITCH PCB DIP ASSEMBLY AND RIGHT PCB ASSEMBLY(SMT/DIP) AND LEFT PCB

ASSEMBLY(DIP) AND RIHGT FRONT PCB DIP ASSEMBLY AND FSR PCB

ASSEMBLY(SMT). (Fig.5)

(A) REMOVE THE 8 PCS SCREWS AND 6 PCS WASHER AND 2 PCS WASHER EXTERNAL BEFORE

REMOVAL OF DD MOTOR.

(B) REMOVE THE 12 PCS SCREWS AND 4 PCS CONNECTOR BEFORE REMOVAL OF START/STOP PCB

DIP AND TOGGLE SWITCH PCB DIP ASSEMBLY.

RIGHT PCB ASSEMBLY(SMT/DIP) AND LEFT PCB ASSEMBLY(DIP) AND RIHGT FRONT PCB DIP

ASSEMBLY.

(D) REMOVE THE 2 PC CONNECTOR BEFORE REMOVAL OF FSR PCB ASSEMBLY(SMT).

Fig.5

Ce manuel convient aux modèles suivants

Table des matières

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur