R&S SMBV100B Manuel utilisateur
R&S®SMBV100B
Vector Signal Generator
Getting Started
Getting Started
Version 05
1423104902
(>G:a2)
This document describes the R&S®SMBV100B, stock no. 1423.1003.02 and its
options.
© 2019 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1423.1049.02 | Version 05 | R&S®SMBV100B
The following abbreviations are used throughout this manual: R&S®SMBV100B is abbreviated as
R&S SMBV100B, R&S®WinIQSIM2TM is abbreviated as R&S WinIQSIM2, R&S®VISA is abbreviated as
R&S VISA.
Contents
R&S®SMBV100B
3Getting Started 1423.1049.02 ─ 05
Contents
1 Preface....................................................................................7
1.1 Key Features......................................................................................... 7
2 Safety and Regulatory Information...................................... 9
2.1 Safety Instructions................................................................................9
2.2 Labels on R&S SMBV100B.................................................................12
2.3 Korea Certification Class A................................................................12
3 Documentation Overview....................................................13
3.1 Getting Started Manual.......................................................................13
3.2 User Manuals and Help...................................................................... 13
3.3 Service Manual....................................................................................14
3.4 Instrument Security Procedures....................................................... 14
3.5 Basic Safety Instructions................................................................... 14
3.6 Data Sheets and Brochures............................................................... 14
3.7 Release Notes and Open Source Acknowledgment (OSA).............15
3.8 Application Notes, Application Cards, White Papers, etc...............15
4 Preparing for Use.................................................................17
4.1 Lifting and Carrying............................................................................17
4.2 Unpacking and Checking................................................................... 17
4.3 Choosing the Operating Site............................................................. 18
4.4 Setting Up the R&S SMBV100B......................................................... 18
4.4.1 Placing the R&S SMBV100B on a Bench Top...................................... 18
4.4.2 Mounting the R&S SMBV100B in a Rack............................................. 19
4.5 Important Aspects for Test Setup......................................................20
4.6 Connecting to Power.......................................................................... 22
Contents
R&S®SMBV100B
4Getting Started 1423.1049.02 ─ 05
4.7 Connecting to LAN............................................................................. 22
4.8 Connecting USB Devices................................................................... 23
4.9 Connecting to RF................................................................................ 24
4.10 Connecting to LO In/Out.................................................................... 24
4.11 Connecting to Ref In/Ref Out.............................................................25
4.12 Connecting to HS Dig I/Q................................................................... 26
4.13 Switching On or Off............................................................................ 27
5 Instrument Tour................................................................... 31
5.1 Front Panel Tour..................................................................................31
5.1.1 Touchscreen..........................................................................................32
5.1.2 Keys...................................................................................................... 33
5.1.2.1 Utility Keys............................................................................................ 33
5.1.2.2 On/Standby........................................................................................... 33
5.1.2.3 Function Keys....................................................................................... 34
5.1.2.4 Keypad..................................................................................................34
5.1.2.5 Editing Keys.......................................................................................... 35
5.1.2.6 Navigation Controls...............................................................................35
Rotary Knob.......................................................................................... 35
Navigation Keys.................................................................................... 36
Display Keys......................................................................................... 36
5.1.3 Connectors............................................................................................37
5.2 Rear Panel Tour...................................................................................38
5.2.1 Connectors............................................................................................39
6 Trying Out the Instrument...................................................43
6.1 Generating an Unmodulated Carrier................................................. 43
6.2 Generating a Digitally Modulated Signal.......................................... 46
6.3 Triggering the Instrument with an External Signal.......................... 48
Contents
R&S®SMBV100B
5Getting Started 1423.1049.02 ─ 05
6.4 Enabling and Configuring a Marker Signal...................................... 54
6.5 Verifying the Generated Signal with the Graphics Display............. 55
6.6 Saving and Recalling Settings...........................................................58
6.7 Generating an EUTRA/LTE Signal..................................................... 61
7 System Overview................................................................. 67
7.1 Brief Introduction to the Instrument's Concept............................... 67
7.2 Signal Flow at a Glance......................................................................67
7.3 Internal Baseband Source ("Baseband" Block)...............................69
7.4 Digital Baseband Input ("BB Input"Block)....................................... 69
7.5 Additional White Gaussian Noise ("AWGN" Block)......................... 70
7.6 "I/Q Stream Mapper" Block................................................................ 70
7.7 I/Q Modulator ("I/Q Mod" Block)........................................................ 70
7.8 Analog I/Q Output ("I/Q Analog" Block)............................................71
7.9 RF and Analog Modulations ("RF" Block)........................................ 71
7.10 Applications Examples of the R&S SMBV100B............................... 71
8 Instrument Control.............................................................. 73
8.1 Possible Ways to Operate the Instrument........................................ 73
8.2 Means of Manual Interaction..............................................................74
8.3 Understanding the Display Information............................................75
8.3.1 Status Bar............................................................................................. 75
8.3.2 Block Diagram.......................................................................................76
8.3.3 Taskbar................................................................................................. 77
8.3.4 Additional Display Characteristics.........................................................78
8.4 Accessing the Functionality.............................................................. 80
8.5 Entering Data.......................................................................................82
8.5.1 Entering Numeric Parameters...............................................................82
8.5.2 Entering Alphanumeric Parameters...................................................... 83
Contents
R&S®SMBV100B
6Getting Started 1423.1049.02 ─ 05
8.5.3 Undo and Redo Actions........................................................................ 83
8.6 Getting Information and Help............................................................ 83
8.7 Remote Control................................................................................... 85
8.8 Remote Operation over VNC..............................................................86
9 Contacting Customer Support........................................... 87
Index..................................................................................... 89
Preface
R&S®SMBV100B
7Getting Started 1423.1049.02 ─ 05
1 Preface
The R&S SMBV100B is a new signal generator developed to meet demanding
customer requirements. Offering excellent signal characteristic and straightfor-
ward and intuitive operation, the signal generator makes signal generation fast
and easy.
1.1 Key Features
The R&S SMBV100B is a new high-performance signal generator developed to
meet demanding customer requirements. Offering excellent signal characteristic
and straightforward and intuitive operation, the signal generator makes signal
generation fast and easy.
Outstanding key features of the R&S SMBV100B are:
●Frequency range from 8 kHz to 6 GHz
●Up to 500 MHz I/Q modulation bandwidth (in RF) with internal baseband
●Support of all important digital standards such as LTE incl eMTC/NB-IoT, 5G
NR, WLAN IEEE 802.11a/b/g/n/j/p/ac/ax, 3GPP FDD/HSPA/HSPA+
●Excellent signal quality for high accuracy in spectral and modulation measure-
ments
●Intuitive operation via touchscreen with block diagram as key element
●Graphical signal monitoring at practically every point in the signal flow
●SCPI macro recorder and code generator for generating executable remote
control code from manual operating steps (for MATLAB®, CVI, etc.)
For more information, see data sheet.
Key Features
Preface
R&S®SMBV100B
8Getting Started 1423.1049.02 ─ 05
Key Features
Safety and Regulatory Information
R&S®SMBV100B
9Getting Started 1423.1049.02 ─ 05
2 Safety and Regulatory Information
The product documentation helps you use the R&S SMBV100B safely and effi-
ciently. Follow the instructions provided here and in the Chapter 2.1, "Safety
Instructions", on page 9.
Intended use
The R&S SMBV100B is intended for the development, production and verification
of electronic components and devices in industrial, administrative, and laboratory
environments. Use the R&S SMBV100B only for its designated purpose. Observe
the operating conditions and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●In Chapter 2.1, "Safety Instructions", on page 9. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the R&S SMBV100B.
●Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
2.1 Safety Instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
sheet, manuals and the printed safety instructions. If you are unsure about the
appropriate use, contact Rohde & Schwarz customer service.
Using the product requires specialists or specially trained personnel. These users
also need sound knowledge of at least one of the languages in which the user
interfaces and the product documentation are available.
Safety Instructions
Safety and Regulatory Information
R&S®SMBV100B
10Getting Started 1423.1049.02 ─ 05
If any part of the product is damaged or broken, stop using the product. Never
open the casing of the product. Only service personnel authorized by
Rohde & Schwarz are allowed to repair the product. Contact Rohde & Schwarz
customer service at http://www.customersupport.rohde-schwarz.com.
Lifting and carrying the product
Some products are heavy. A safety label on the casing indicates if a product
weighs more than 18 kg. To safely move the product, you can use lifting or trans-
porting equipment such as lift trucks, cranes, forklifts and hand trucks. Secure the
product, but not by its handles. Excessive force can break the handles.
Choosing the operating site
Only use the product indoors. The product casing is not waterproof and water that
enters can electrically connect the casing with live parts. This can lead to electric
shock, serious personal injury or death if you touch the casing.
Unless otherwise specified, you can operate the product up to an altitude of
2000 m above sea level. The product is suitable for pollution degree 2 environ-
ments where nonconductive contamination can occur. For more information on
environmental conditions such as ambient temperature and humidity, see the
data sheet.
Setting up the instrument
Always place the instrument on a stable, flat and level surface with the bottom of
the instrument facing down.
To save space, you can mount several instruments in a rack. If you stack instru-
ments, keep in mind that a stack of instruments can tilt over and cause injury.
If the instrument has foldable feet, always fold the feet completely in or out to
ensure stability. The feet can collapse if they are not folded out completely or if
the instrument is moved without lifting it. The foldable feet are designed to carry
the weight of the instrument, but not an extra load.
Connecting to power
The product is an overvoltage category II product and has to be connected to a
fixed installation used to supply energy-consuming equipment such as household
appliances and similar loads. Be aware that electrically powered products have
risks, such as electric shock, fire, personal injury or even death.
Safety Instructions
Autres manuels pour SMBV100B
1
Table des matières
Autres manuels R&S Générateur portable
R&S
R&S SMCVB-K163 Manuel utilisateur
R&S
R&S AREG800A Manuel utilisateur
R&S
R&S SMCVB-KB106 Manuel utilisateur
R&S
R&S SMCVB-K161 Manuel utilisateur
R&S
R&S SMA100B Manuel utilisateur
R&S
R&S SMW200A Manuel utilisateur
R&S
R&S SMCV100BP1 Manuel utilisateur
R&S
R&S SMCVB-K164 Manuel utilisateur
R&S
R&S SMCVB-K156 Manuel utilisateur
R&S
R&S AREG800A Manuel utilisateur
