RAMTONS RM/475 Manuel utilisateur

READ AND SAVE THESE INSTRUCTIONS

Version 1.0 2015

Attention: Pictures in the IM are for reference only.

FAN HEATER

MODEL: RM/475

GD Midea Environment Appliances MFG. Co.Ltd.

No.28,Dong Fu Road,HeSui East Industrial Area,Dong Feng Town,

ZhongShan,GuangDong,China.

OWNER’S MANUAL

IMPORTANT SAFEGUARDS

When using any electrical appliance, basic safety

precautions should always be followed, including the

following:

1. To ensure Familiarity with the controls, safety features,

and operation of your heater -Read all instructions before

using.

2. Do not insert foreign objects through the intake or

discharge grilles.

3. This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

4. Disconnect the cord from the outlet before cleaning. A

heater should never be used under conditions where it

may be immersed, or come in contact with water.

Similarly do not plug in your heater if its surfaces are

damp.

5. Do not use the appliance on the same socket or electric

circuit with other electrical appliances so as to prevent

the circuit from being overloaded, which will cause fire.

Please do not prolong the power cords by yourself or use

movable socket.

6. Unplug heater by grasping plug and pulling it from the

outlet. NEVER YANK ON CORD.

7. If the supply cord is damaged, it must be replaced by its

service agent or a similar qualify person in order to avoid

hazard.

8. Do not use in locations when the heater will be left

unattended for long periods of time. (for example -

several weeks in an unoccupied summer cottage)

9. Do not use attachments not recommended and sold by

MIDEA distributor.

10. Loose connections between the heater plug and the

electrical outlet may cause the plug to overheat.

11. Ensure no other appliances are plugged into the same

circuit as your heater. A circuit overload could occur

resulting in dimmed lights, blown fuses, tripped circuit

breakers, or fire hazard.

12. The heater is intended for household indoor use only.

13. The heater must not be located immediately below a

socket-outlet.

14. Warning: In order to avoid overheating, do not cover

the heater.

15. Do not use this heater in the immediate surroundings of

a bath, a shower or a swimming pool.

16.

17. Children of less than 3 years should be kept away unless

continuously supervised. Children aged from 3 years and

less than 8 years shall only switch on/off the appliance

provided that it has been placed or installed in its intended

normal operating position and they have been given

supervision or instruction concerning use of the appliance

Correct Disposal of this product

This marking indicates that this product should not be disposed with

other household wastes throughout the EU. To prevent possible

harm to the environment or human health from uncontrolled waste

disposal, recycle it responsibly to promote the sustainable reuse of

material resources. To return your used device, please use the return

and collection systems or contact the retailer where the product was

purchased. They can take this product for environmental safe

recycling.

PART FIGURE

in a safe way and understand the hazards involved.

Children aged from 3 years and less than 8 years shall

not plug in, regulate and clean the appliance or perform

user maintenance.

18. CAUTION — Some parts of this product can become

very hot and cause burns. Particular attention has to be

given where children and vulnerable people are present.

19. WARNING: This heater is not equipped with a device

to control the room temperature. Do not use this heater

in small rooms when they are occupied by persons not

capable of leaving the room on their own, unless

constant supervision is provided.

CAUTION — Some parts of this product can become very

hot and cause burns. Particular attention has to be given

where children and vulnerable people are present.

WARNING: IN ORDER TO AVOID OVERHEATING,

DO NOT COVER THE HEATER.

Thermostat Control

Power and Setting Control

Handle (behind unit)

Pilot lamp

Outer Grill

Front Housing

This heater is pre-assembled in factory.

ASSEMBLY

OPERATING INSTRUCTION

• Place the heater on a firm level surface free from obstructions, and at least 3 ft.

away from any wall and any other objects such as furniture, curtains, plants or

combustible material.

• With the Power and Setting Control “ Power and Setting Control” in the ”OFF”

position, plug the heater into a grounded 220-240V outlet.

• Turn the heater ”ON” by turning the Power and Setting Control “Power and Setting

Control” clockwise to your desired power setting (FAN, LOW, MED, or HIGH). The

Power Indicator Light “ Power Indicator A C Light ” will illuminate. The power

settings operate as follows:

FAN: The Fan Circulates room air only. The heating elements are “OFF”.

LOW: The Fan and heating elements operate at 800 Watts.

MED: The Fan and heating elements operate at 1200 Watts.

HIGH: The Fan and heating elements operate at 2000 Watts.

• Turn the Thermostat Control “ Thermostat Control ” to your desired setting from

“MIN” to “MAX”.

CAUTION: This heater includes a Thermal Cut-Off Overheat Protection System

that shuts the heater off if it overheats due to abnormal conditions. If this occurs,

turn the heater ”OFF”, unplug it, and inspect and remove any objects on or

adjacent to the heater. Allow it to cool fora few minutes, plug it back in, and

resume normal operation.

SAFETY FEATURES

This heater is equipped with an automatic Safety Shutoff Switch for overheat

protection, which is activated when the internal temperature exceeds normal

operating temperatures.

If this occurs, turn the heater to “OFF”. Unplug the heater and allow it to cool.

Inspect and carefully remove any objects on or adjacent to the heater.

Plug the heater back in and resume normal operation.

Tip Over Switch: This heater includes a Safety Tip-Over Protection Feature which

will shut the heater off in case it is tipped over. If, at any time, the heater does tip

over, put the heater back in the upright position. The heater will resume its normal

operation.

1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe

the exterior surfaces of the heater occasionally with a cloth moistened (not

dripping wet) with a solution of mild detergent and water. Dry the case

thoroughly with a soft dry cloth before operating the heater.

2. The fan motor is lubricated by the factory, and will require no further lubrication.

3. No other user maintenance is required or recommended. If service is required,

send your heater to the nearest authorized service depot.

4. Store heater in a clean and dry place when not in use.

REMEMBER - portable electric heaters are designed for spot heating, or as a

supplementary heat source. They are not intended to be main sources of heat

during the normal heating season.

Note: There may be trace of smoke or odour when unit is first operated. Do not

be alarmed. This indicates that a drop of oil fell on the heating coil during the

manufacturing process. It will quickly evaporate, and should not re-occur.

READ AND SAVE THESE INSTRUCTIONS

CLEANING AND MAINTENANCE

This fan heater is equipped with a pilot lamp that glows whenever the heater is

plugged in and turned on. It will continue to glow even if the thermostat has cycled

the heating elements off. This feature is to prevent you from being unaware that

the heater is operating and maintaining the temperature of the room.

When you do not wish the heater to control the room temperature, turn the control

switch to O (off) and remove the plug from the electrical outlet.

PILOT LAMP

Your heater is fitted with a safety device "Double Protector" that (1) switches off the

heater by thermal cut-off in the event of overheating or malfunction, It will reset

while the temperature reduce to a normal level. (2) Shuts off the heater by thermal

fuse in the event of overheating or malfunction and not operates by some other

accidental reason.

If overheating or malfunctions continue, return the heater to an Approved Service

Agent for examination.

The most common cause of overheating is deposits of dust or fluff entering the

heater, Ensure these deposits are removed regularly by unplugging the unit and

vacuum cleaning air vents and front grille.

SAFETY CONTROL

Table des matières

Autres manuels RAMTONS Chauffage

RAMTONS

RAMTONS RM/476 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur