RAKSA iDet Manuel utilisateur
Version: December, 2013
© TS-Market
USER MANUAL
Source
of Test Radio
Signal
1. Overlook
Source of test radio signal is designed to acquire
and improve the skills to detect radio transmitting
devices used for eavesdropping.
Besides the device is recommended for testing and
monitoring the performance of various detection
devices.
2. Usage
The source of test radio signal is executed as
a key trinket representing a simulator of radio
transmitting device (bug). It doesn't require any
specic skills from the user.
Minimum size and operation of the source for
2 hours (battery life) will bring the test searches for
the alleged illegal eavesdropping device closer to
the real conditions.
To power on / off radio signal press the left / right
button.
ON state is indicated by the LED. Decrease or
absence of LED brightness indicates battery
discharge, in that case it must be replaced. To do
this, remove the screw on the back cover and open
the case.
Attention!
Note the polarity of the battery,
otherwise it may damage the device.
3. Technical Characteristics
• frequency: 433.92 MHz
• output power: 1 mW
• modulation: continuous
• battery life: 2 h
• power: 12V (27A)
• operating temperature: +5 +40 °C
• dimensions: 51 x 34 x 13 mm
• weight: 20 g
Manufacturer: www.raksa.ru
Technical support: [email protected]
Exporter company: www.ts-market.com
Autres manuels pour iDet
1
Autres manuels RAKSA Capteur de sécurité
