Racepak IQ3 Drag Dash Manuel utilisateur
IQ3 Drag Dash Installation Manual
1
IQ3 Drag Dash
Installation Manual
IQ3 Drag Dash Release Rev B 021016
Racepak, IQ3 Drag Dash and V-Net are trademarks of Racepak LLC.
© Racepak LLC
IQ3 Data Logger Dash Installation Manual
2
IQ3 Drag Dash Installation Manual
3
Disclaimer
Racepak LLC makes no representations or warranties of any type with respect to the contents in
this manual. Racepak LLC disclaims any implied warranties or fitness for any particular purpose.
Racepak LLC is not liable for any errors contained within or for incidental or consequential
damages in connection with the supply, performance or use of the hardware and software or
this manual.
Racepak LLC reserves the right to revise this installation and user manual at any time, without
obligation to notify any person of revisions. As defined by the Magnuson-Moss warranty Act, do
not install any parts or services unless you have the technical ability to properly set-up the
entire vehicle to compensate for the installation of those parts. The necessary work and
expertise needed to install different products varies. Instructions, where provided, are given to
assist in the installation only; they are not a substitute for mechanical experience in setting up
vehicles. Racepak LLC is not responsible for any personal or property damages caused by the
installation of this product.
Warranty
Racepak LLC makes every effort to ensure our products and services are of the highest quality
and standards. It is our intention to maintain a mutually beneficial and cordial relationship with
each and every customer.
Racepak LLC warrants all merchandise manufactured by Racepak LLC against defects in
workmanship or material for a period of six (6) months after the date of purchase. This
warranty applies to the first retail purchaser and covers only those products exposed to normal
use or service. It does not apply to those products used for a purpose for which said products
were not designed, or which has been altered in any way that would be detrimental to the
performance or life of the product, or misapplication, misuse, negligence, or accident. Any part
or product found to be defective after examination by Racepak LLC will be repaired or replaced.
Racepak LLC assumes no responsibility for diagnosis, removal and/or installation labor, loss of
vehicle use, loss of time, inconvenience or any other consequential expenses.
This warranty is in lieu of any other expressed or implied warranties, including any implied
warranty or merchantability or fitness, and any other obligation on the part of Racepak LLC, or
selling dealer.
If you have any questions regarding warranty, please contact customer service at Racepak LLC.
949-709-5555
Installation of this product may void factory warranty as dealer may wish to verify
mileage/codes/service hours etc. on factory gauge. Install at your own risk. Factory
gauge may be retained and connected for use as a diagnostic tool.
IQ3 Data Logger Dash Installation Manual
4
IQ3 Drag Dash Installation Manual
5
Disclaimer ............................................................................................................... 3
Warranty................................................................................................................. 3
Manual Summary .................................................................................................... 7
Manual Quick View .................................................................................................................................................... 7
Items Included with the IQ3 Drag Dash Display Kit ................................................................................................... 7
IQ3 Drag Dash Features .......................................................................................... 8
General Feature Overview ......................................................................................................................................... 8
IQ3 Drag Dash Displayed Features ............................................................................................................................ 8
Technical Specifications ............................................................................................................................................. 9
IQ3 Drag Dash Functions ......................................................................................................................................... 10
PC Minimum Requirements .................................................................................................................................... 10
DataLink Programming Software ............................................................................................................................. 10
IQ3 Drag Dash Configuration File (software) ........................................................................................................... 10
Data Recording Activation ....................................................................................................................................... 10
Hardware Features ............................................................................................... 11
External Dimensions ................................................................................................................................................ 11
External Features – Front ........................................................................................................................................ 11
External Features – Rear.......................................................................................................................................... 12
Mounting Dimensions ............................................................................................................................................. 12
Installation ............................................................................................................................................................... 14
General Mounting Requirements ............................................................................................................................ 14
Power Supply and Grounding .................................................................................................................................. 15
Engine RPM Signal ................................................................................................................................................... 15
MicroSD Memory Card ............................................................................................................................................ 15
IQ3 Drag Dash Wiring Pinout ................................................................................ 16
External V-Net Sensor Connection (optional add ons 6 maximum) ....................................................................... 19
Factory Default Display Settings............................................................................ 21
External Programming Buttons ............................................................................. 23
Button Programming Modes ................................................................................................................................... 23
General Button Operation ....................................................................................................................................... 23
Button Functions in Setup Mode ............................................................................................................................. 24
Programming in Setup Mode .................................................................................................................................. 24
Display Clock/Time: ................................................................................................................................................. 27
Sensor Hardware Installation: ............................................................................... 28
Oil Pressure and Water Temperature Sensor .......................................................................................................... 28
Driveshaft Collar and Sensor ................................................................................................................................... 30
OBDII and EFI Interface: ........................................................................................ 31
IQ3 Data Logger Dash Installation Manual
6
DatalinkII Software Installation ............................................................................. 33
Configuration Files ................................................................................................ 34
Stand Alone or with V-Net Sensors ......................................................................................................................... 34
Programming the Display Using the DataLink Software ........................................ 35
Com Port Settings ................................................................................................................................................... 35
Reading/Syncing of the Configuration File ............................................................................................................. 36
EFI Interface Programming ..................................................................................................................................... 38
Programming the Display Pages ............................................................................................................................. 40
Programming the Warnings .................................................................................................................................... 42
DataLink II Logging and Downloading ................................................................... 44
Data Download Path ............................................................................................................................................... 44
Setting the Correct Time and Date inside Your IQ3 Drag Dash............................................................................... 45
Clearing Data Files from the Memory Card ............................................................................................................ 46
Initiating a Recording with the IQ3 Drag Dash data logger .................................................................................... 48
Recording Data ....................................................................................................................................................... 48
Configuring the Record Parameters ....................................................................................................................... 49
Naming and Storing the Uploaded Data ................................................................................................................. 53
Viewing Real Time Data on your PC ........................................................................................................................ 55
Setting up the Logger Real Time Telemetry Parameters ........................................................................................ 56
Entering the Datalink Real Time Telemetry Parameters......................................................................................... 56
Starting a Telemetry Session .................................................................................................................................. 57
DataLink II Help Files ............................................................................................................................................... 58
Troubleshooting and FAQ ..................................................................................... 60
DataLink will not communicate with the IQ3 Drag Dash ........................................................................................ 60
V-Net Sensor Channels “lock up” from time to time .............................................................................................. 60
Conclusion ............................................................................................................ 61
IQ3 Drag Dash Installation Manual
7
ManualSummary
This manual makes the assumption that you have installed the most current version of the
DataLink PC software and IQ3 firmware. IQ3 Drag Dash firmware and DataLink updates can be
found at http://www.racepak.com/downloads. As of this writing, the most current DataLink
version is 4.6.0 and the most current IQ3 Drag Dash firmware version is 1.1.
Manual Quick View
The following provides a quick view of the manual layout:
1. IQ3 Drag Dash Features
a. Dash
b. Available channels for display
c. External optional sensors
d. Technical specifications
2. Installation
a. Dash
b. Software
3. Programming The Display
4. Adding Sensors
5. Software Usage
Items Included with the IQ3 Drag Dash Display Kit
Qty. Part Number Description
1 250-DS-IQ3D IQ3 Drag Dash Display Kit (incls. all below items)
1 280-CA-IQ3D Harness/Drag Dash Interface
1 280-CA-VM-TCAPM V-Net Male Terminator Cap
1 890-CA-USBABM-6 USB Programming/Communication Cable
1 810-PT-0150GVT Sensor, analog pressure 0-150 psi
1 810-TR-300 Sensor, analog temperature 0-300°F
1 890-DR-USB-1GB DataLink Software Memory Stick
2 800-SW-PSHBTN Momentary Style Push Buttons, spade terminal
1 N/A Installation Manual
IQ3 Data Logger Dash Installation Manual
8
IQ3DragDashFeatures
The IQ3 Drag Dash is a fully programmable LCD digital display dash that is equipped with an
internal data logger. It has been designed to be used as a standalone unit data logger. All
segments will light up for 1 second at power up. Shortly after segments go to normal mode, the
product version and currently installed firmware will be displayed across the bottom of the
dash for 3 seconds.
General Feature Overview
IQ3 Drag Dash Displayed Features
Using the supplied components in the kit, data from the factory engine control unit (via the
main harness connection) can be acquired for display purposes on the IQ3 Drag Dash. Below is
a list of that information that is available to the end user.
28 Programmable Items on 4 pages
Internal Progressive Shift Light LEDs
4 User Programmable Internal Warning Light LEDs with On-Screen Text Warning
5 Character Programmable Alpha/Numeric Text per Display Channel
Rear Mounted Power/Ground/Adapter/Programming Buttons Input
Rear Mounted V-Net Sensor Connector
Polarized and Shielded, Anti-Glare Coated Display For Sunlight Viewing
Metric and English (SAE) Capable
Dimmable Blue Backlight
Gear Position Indicator
Clock / Time Keeper
2 Remote Switch Inputs (Toggle Pages, Acknowledge Warnings, Basic Setup Parameters)
External Shift Light Output (750mA Max Ground Triggered)
External Warning Light Output (750mA Max Ground Triggered)
Cooling Fan Output to Trigger Fan Relay (Relay required, 750mA Max Ground Triggered)
CAN bus for OBDII or 3
rd
Party ECU’s Interface
6 Additional Sensor Inputs via V-Net (CAN bus)
USB Port for DataLink Communication
Data Recording via microSD memory card
Engine RPM
Driveshaft RPM
Engine Coolant Temperature
Oil Pressure
Internal Progressive Shift Light LEDs
4 Internal Warning Light LEDs
Battery Voltage (Internal)
IQ3 Drag Dash Installation Manual
9
Technical Specifications
Sensor Channels - Defined Below
Available V-Net Data Channels (optional additions) 6
Internal Channels as Defined Below 7
IQ3 Internal Channels Voltage
Engine RPM
Driveshaft RPM
Gear Position
Water Temperature
Oil Pressure
Trans-Brake event marker
Processor Speed 20MHz
Power & Current
Input Voltage 9-18V
Current Draw 350mA - Without warning and shift LED’s
active
Reverse Voltage Protection Yes
Operating Temperature 32 - 140°F / 0-60°C
Mounting Orientation Rear of dash facing direction of travel
Memory
Maximum microSD Card Size
microSD Flash - Included
Supports microSD and microSDHC cards up
to 16GB.
Sample (Logging) Rates of Data Channels
IQ3 Internal Channels 100 Hz Maximum, user adjustable to 1 Hz
Vnet Channels 100 Hz Maximum, user adjustable to 1 Hz
Engine RPM Input 50% duty cycle, 5-18V square wave signal
Start Logging Channel (factory default) Either pushbutton held for +5 seconds
IQ3 Data Logger Dash Installation Manual
10
IQ3 Drag Dash Functions
The IQ3 Drag Dash is the main component of the system, as it contains the data logger and
microSD memory card.
PC Minimum Requirements
Windows® XP / Vista / 7 / 8 / 10 operating system
USB 2.0 Port/ 1024 x 768 or higher monitor resolution
DataLink Programming Software
The DataLink software is used to both set up and configure the IQ3 Drag Dash. It will be used to
modify any settings, page layouts, warning light settings, etc. The DataLink software requires a
Windows based PC with a USB 2.0 port for communication. Programming cable is supplied in
the kit.
IQ3 Drag Dash Configuration File (software)
The Configuration File contains the programming settings for both the dash and any internal
and external sensors utilized by the IQ3 Drag Dash. Any additional sensors that were not
shipped with the IQ3 Drag Dash will require updating and syncing of the configuration file.
Data Recording Activation
Any active channel may be used to start logging. From the factory, the IQ3 Drag Dash is
programmed to start logging if either pushbutton is held for at least 5 seconds and stops
logging when power is switched off on the dash. A data file is written every 3 seconds to the
memory card during recording. When power is switched off, the last 3 seconds of data may not
have been written to the card to so take note of this. Once written to the card, the file is
numbered in subsequent order (1,2,3,etc). The start logging channel may be changed to any
valid sensor channel, by the user.
Terminology
In order to assist in the installation and usage of the IQ3 Drag Dash, the following provides an
outline of the most commonly used words that will be encountered in this manual:
Analog: Data created by the reading of a voltage change sent from a sensor.
Calibrate: The process of assigning values to sensor voltage output, in order to graph and analyze the sensor data.
CAN bus: The specific name of the technology utilized to create the V-Net sensor system.
Channel: The input from one sensor.
Digital: A sensor or signal that has only two values, off or on such as the measuring of ignition pulses to calculate Engine
RPM.
HZ: Number of times per second. Used to define sample rate. Example: 4Hz represents data that is saved 4 times (every
.250) per second.
Sensor: A device that converts a physical property, such as pressure into a voltage signal.
Transducer: See Sensor.
V-Net Channel: Any sensor that is connected to the V-Net port of the IQ3 Drag Dash.
V-Net: Racepak exclusive that allows multiple sensors (analog or digital) to transmit their data over a single cable, back to
the IQ3 Drag Dash.
Autres manuels pour IQ3 Drag Dash
1
Table des matières
