R82 Wombat basic Manuel utilisateur

03.2005

wombat

The R82 logo and the Wombat chair are registered trademarks of R82 A/S.

English user manual

GB CONTENTS

Safety ................................................................................4

Guarantee ......................................................................... 4

Tools .................................................................................. 4

Maintenance ...................................................................... 4

Wombat klar til brug ........................................................... 5

Adjusting seat and back .................................................... 6

Height adjustment basic frame .......................................... 7

Height adjustment upgrade frame ..................................... 8

Head support ..................................................................... 9

Swing-away side supports .............................................. 10

Armrest and tray .............................................................. 11

Hip supports .................................................................... 12

Pommel ........................................................................... 12

Swing-away knee supports ............................................. 13

Foot rest .......................................................................... 14

Vests and belts ................................................................ 15

Helpers handles .............................................................. 15

The sitting comfort of the back cushion ........................... 16

The sitting comfort of the seat cushion ............................ 17

Product identification ....................................................... 18

Measurements ................................................................. 19

Accessories ..................................................................... 20

Technical data ................................................................. 20

Producer .......................................................................... 20

Distributor ........................................................................ 20

Care and maintenance .................................................... 21

Stain removal guide ......................................................... 22

Troubleshooting ............................................................... 23

WOMBAT

Congratulations on choosing the WOMBAT. We are convinced that it will fully live

up to your expectations. Like any other quality product from R82, the WOMBAT

has been developed on the basis of many years of experience, producing and

adapting aids and appliances for disabled persons.

The Wombat is the activity chair from R82, available in 3 sizes and 2 versions:

WOMBAT basic and WOMBAT upgrade

The Wombat basic is available with manuel height adjustment or with a gasspring.

The Wombat upgrade is available with gasspring or an electrical motor. Both

versions is delivered with a multiadjustable seat, back and footrest.

This user manual is meant as guide to assist the user in gaining the full benefit

of the many options offered by the Wombat. Therefore we recommend you to go

through this manual before the Wombat is put into use.

Basic Upgrade

Pat. pend. Pat. pend.

SAFETY

The Wombat has erned the CE-mark. This certifies that it meets all relevant

European safety requirements.

Remove the CE-mark, when rebuilding the product or when using other

than original R82 spare parts and fittings.

Never leave your child unattended in this product. Ensure permanent

supervision by an adjult. Incorrect use of the Wombat, may cause serious

injury on the user. Take care that all the fixations and adjustments are

placed and fitted correctly and check it on a regular basis.

The Wombat is for indoor use only.

GUARANTEE

Notification of defects will be received at R82 A/S within two years.

The Wombat is guaranteed for 12 months. The guarantee is only valid when

using original R82 spare parts and fittings. All special adjustments must be

made by R82. R82 will not be held responsible for damage or injury caused by

use of non-original parts or repairs made by a non-authorized R82 person.

TOOLS

Use the enclosed Allen keys to perform the adjustments described in this

manual.

When adjustments have been made, then make sure to tighten up.

MAINTENANCE

The cover is removable and can be washed at max 30o. Please find the stain

removal guide in the back of the manual.The Wombat functions without any

maintenance, but it is recommended to clean frequently and to oil the swing

away parts occasionally.

Do not use any cleaning materials containing chlorine or methylated

spirit.

The gasspring functions without any maintenance.

Do not expose the gasspring to pressure, high temperatures or perfo-

ration.

The batterybox

The battery box may make out an environ-mental danger, therefore it

should be brought into a recycling centre, when it is not to be used any

more.

WOMBAT READY TO

USE

Wombat Basic:

When you unpack your Wombat, you will find the

back of the chair packed separately.

Begin by removing the frame from the box. Loosen

handle (A) on the central bar. Release handle (B)

under the right-hand side of the seat so the seat

can be raised.

Pull out the footrest so that it is at a right angle to the

bar. Loosen the tightening handle (C) for the footrest

bar under the seat and adjust the footrest.

The back support is fitted on to the seat by turning the

knob clockwise and pulling out the knob (D) behind

the back support bar and attaching the back there.

Wombat Upgrade:

When you unpack your Wombat, you will find the

back of the chair packed separately.

Begin by removing the frame from the box. Raise

the seat unit by placing your foot on the pedal (E).

Remember first to loosen the safety lock (F) to the

right of the pedal.

Pull out the footrest so that it is at a right angle to the

bar. Loosen the tightening handle (C) for the footrest

bar under the seat and adjust the footrest.

Size 1+2: The back support is fitted on to the seat

by turning the knob clockwise and pulling out the

knob (D) behind the back support bar and attaching

the back there.

Size 3: First remove the security nut (I) to be able to

mount the back on size 3. Pull out the locking lever

(J). Mount the backsupport bar in the fitting and tip

into vertical. Depress the blue ring (K) to push down

the bar in the fitting. Mount the security nut again.

Adjust the height to the desired position. Resecure

the locking lever.

ADJUSTING SEAT AND

BACK

The angle of the Wombat Upgrade seat is ad-

justable by simply pushing the release handle

(A), located below the seat. Tip away the safety

device (B) before pushing the release handle.

The angle of the Wombat Basic seat is adju-

stable by turning the handle (C), located below

the seat.

Always keep a hand on the backrest to

avoid the seat from tipping too much

forward.

Furthermore it is possible to angle the back by

loosen the grip (D) on the back of the chair.

Seat depth (only size 1+2):

To minimize the seat depth, push the back for-

ward and adjust the angle. To adjust the back,

loosen the handle (E).

Back height (size 1+2):

Adjust the back height by loosen the knob (F).

Turn the knob counterclockwise to loosen. Then

pull out the knob and the back is adjustable in

height.

Let go of the knob and the wanted back height

will be locked. Turn the knob again - this time,

clockwise, and the lock will be further ensured.

Back height (size 3):

Pull out locking lever (G) and depress the blue

ring (H) to adjust the back height. Adjust the

height to the desired position and release the

blue ring (H). Resecure locking lever (G).

HEIGHT ADJUSTMENT

BASIC FRAME

The Wombat basic frame is height adjustable

either manual or with gasspring.

The Wombat basic with manual ajdustment:

To adjust the Wombat basic in height, loosen

the grip (A). Adjust the height and fasten at the

wanted position.

The Wombat basic with gasspring:

To adjust the frame height with a gasspring, push

down the release handele (B) below the seat.

Tip away the safety device before pushing the

release handle.

HEIGHT ADJUSTMENT

UPGRADE FRAME

The Wombat upgrade frame is adjustable either

with gasspring or with an electrical motor.

The Wombat upgrade with gasspring:

The height is adjustable -from floor to table-

height. When preasuring the footpedal (A) the

height is adjusted. The footpedal is equipped

with a security knob (B).

The Wombat upgrade with electrical motor:

Use the handset (C) to adjust the height of the

seat.

If the the chair has to be used in the lowest

position, the foot rest has to be removed

first.

Recharging the batteries (D):

1) Connect the enclosed charger to the mains

voltage

2) Dismount the wires from the batteries to the

actuator

3) Mount the wires from the charger into the

batteriebox

4) Charge the batteries every night or for 8-12

hours. The batteries can not be charged to

much. But do not drain the batteries complet-

ely. The batteries are to be replaced within a

periode of 4 years.

For optimum lifetime of the actuator,

connect it to the mains voltage 12 hours

before use.

Do not leave the child by it self with the

handset and do not let ohter child play

around with the handset.

The electric frame does not have a safety

stop at the height adjustment function.

HEAD SUPPORT

The head support is mounted in the back of the

chair and is fastened with the finger screw (A).

Use the enclosed 5 mm Allen key to loosen the

screws (B) and to adjust the head support.

Angle the head support further by loosen the

screw (C). Adjust the head support sideways by

loosen the screw (D).

Do not adjust the height above the

maximumlevel. See warningmark.

SWING-AWAY SIDE

SUPPORTS

Wombat size 1+2:

Remove the back cushion and mount the side

support in the slots in the back, using the enclo-

sed screws and the 5 mm Allen key (A). Do not

use the long screws.

Push down the red button (B) to swing-away the

side support.

Wombat size 3:

The adjustable swing side support is fitted into

the groove at the back of the chair (C). Secure

the long screws one by one to grooves (D) at

the rear of the back support. Place the nuts one

by one in the small hole at the front of the back

support. Make sure that the first screw passes

through the groove plate and is properly threa-

ded into the nut before securing the next screw.

Do not use the short screws.

It is recommendable to oil the swing away

parts occasionally.

Autres manuels pour wombat basic

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels R82 Mobilier d'intérieur

R82

R82 Wombat Solo Manuel utilisateur

Manuels Mobilier d'intérieur populaires d'autres marques

Homelegance

Homelegance California 1662PEK-1CK Manuel utilisateur

Osmond Ergonomics

Osmond Ergonomics FLO Manuel utilisateur

OVE

OVE ELOISE 42 Manuel utilisateur

overstock

overstock MF286255 Manuel utilisateur

Sonoma

Sonoma 160-801 Manuel utilisateur

BOLERO

BOLERO Wicker Side Chair CF158 Guide d'installation

Coaster

Coaster 4799N Manuel utilisateur

Stor-It-All

Stor-It-All WS39MP Manuel de programmation

Lexicon

Lexicon 194840161868 Manuel utilisateur

Next AMELIA NEW 462947 Manuel utilisateur

Furinno

Furinno 18089 Manuel utilisateur

Munchkin

Munchkin Push to Close MK0001 Manuel utilisateur

impekk

impekk Manual II Manuel utilisateur

Elements

Elements Ember Nightstand CEB700NSE Manuel utilisateur

JWA

JWA CARY 68429 Manuel utilisateur

VIPACK

VIPACK AMORI AMKB9014 Manuel utilisateur

Anthro

Anthro GT03 Series Manuel utilisateur

Rowico

Rowico SANNA Manuel utilisateur

R82 wombat basic Manuel utilisateur

Manuels Mobilier d'intérieur populaires d'autres marques