R2TECK DVLM-100 Manuel utilisateur
Digital Video Transmission System
DVLM-100
USER MANUAL
Wuxi R2TECK Co.,Ltd.
Wuxi R2TECK Co.,Ltd
Content
1. EASY WAY TO START THE DEVICE ........................................... 1
1.1 Operating steps and instructions ....................................................................................................... 1
1.1.1 Monitor ........................................................................................................................................ 1
1.1.2 Transmitter ................................................................................................................................. 1
1.1.3 Receiver ..................................................................................................................................... 1
1.1.4 Mobile ......................................................................................................................................... 1
2. SPECIFICATION.......................................................... 3
3 INTRODUCTION .......................................................... 4
3.1 Disclaimer .............................................................................................................................................. 4
3.2 Profile ..................................................................................................................................................... 4
3.3 Intended usage ..................................................................................................................................... 4
3.4 Caution ................................................................................................................................................... 4
4. PRODUCT OVERVIEW..................................................... 6
4.1 Brief introduction .................................................................................................................................. 6
4.2 Standard spec ....................................................................................................................................... 6
5. INTERFACE DEFINITION ................................................... 7
5.1 Transmitter port .................................................................................................................................... 7
5.2 Receiver port ....................................................................................................................................... 10
6. Installation ...................................................................................................................................... 12
6.1 Transmitter installation ...................................................................................................................... 12
6.2 Receiver installation ........................................................................................................................... 12
7. BIND AND FREQUENCY SWITCH............................................ 14
7.1 Frequency switch .................................................................................................................. 14
7.2 Bind ...................................................................................................................................................... 14
8. SOFTWARE UPGRADE INSTRUCTIONS .................................................................................... 15
8.1 Function description .............................................................................................................. 15
8.2 Operating steps ..................................................................................................................... 15
8.3 Display content ...................................................................................................................... 15
8.4 Trouble symptoms / solution ................................................................................................. 15
9. APP instruction ............................................................................................................................... 15
9.1 INFO setting ........................................................................................................................................ 16
9.2 Power setting ...................................................................................................................................... 16
10. TROUBLES SOLUTION .................................................. 17
10.1 Trouble symptoms / diagnosis / solution ............................................................................. 17
11. APPENDIX ............................................................ 18
11.1 Video input format requirement ...................................................................................................... 18
11.2 Monitor INFO content ...................................................................................................................... 18
12. CONTACT INFO ........................................................ 21
1
1. Easy way to start the device
1.1 Operating steps and instructions
1.1.1 Monitor
Ø Connect monitor to the power
1.1.1 Transmitter
Ø Install the antennas.
Ø Install the HDMI camera cable.
Ø Connect camera to the power, select the correct video format.
Ø Connect Transmitter to the power.
There should be below instructions if the Transmitter works well.
WORK light flash regularly.
HDMI light turn-on
LINK light turn-on if the Transmitter connect to Receiver.
1.1.2 Receiver
Ø Install the antennas
Ø Install the monitor by HDMI cable. (optional)
Ø Turn off the Receiver power button, then connect to the power (DC-12V power), turn on the receiver
power button again.
Ø Turn on the power.
There should be below instructions if the receiver works well.
WORK light flash regularly
HDMI light turn-on(if installed the HDMI monitor).
LINK light turn-on if the receiver connect to transmitter.
HDMI monitor instruction (if installed the HDMI monitor):
The monitor shows logo "R2TECK" after receiver connect to the power.
After that, the monitor shows progress bar: Start-up / Selfcheck / Link.
Monitor real-time display the camera video when the transmitter connect to the receiver.
1.1.3 Mobile
Ø The mobile connect the wifi network "R2TECK ", WIFI password "12345688"
Ø wait for connecting
Ø Run the APP (if the APP is already running, turn off it first then run again)
Ø The mobile real-time display the camera video, the MOBILE light on the receiver turn-on.
Attention: Currently only allow working one mobile, if want to change the mobile, please follow below process:
Disconnect the mobile with receiver wifi network.
Wait receiver MOBILE light turn off.
Repeat the above 4 steps.
iOS App installation: In App store, search the key word “DVLx” and download.
2
Android installation: Refer to http://www.gor2teck.com/download/ ->DVLX android mobile client (apply for
DVLM-100/DVL-1/DVL-C).
1.1.3.1
3
2. Specification
Here list the detailed specification about DVLM-100
Function specification
Communication distance
(outdoor, no obstruction)
100mw transmission distance ≥ 800m
800mw transmission distance ≥ 1500m
Wall Penetration ability
3 cement walls; 1 ferroconcrete wall
Output Power
25mw-800mw adjustable
Sensitivity
-95dbm±2dbm
Frequency
5G
Physics specification
working temperature
-10~60℃
storage temperature
-20~50℃
dimension (including the shell, not
including the antennas)
Transmitter: L.114mm x W. 70mm x H. 25mm
Receiver: L.127mm x W. 72mm x H. 28mm
Weight (including the shell, not
including the antennas)
Transmitter: 178g
Receiver: 233g
Hardware function support
Transmitter working voltage
DC-12V, 6V~17.1V, suggest the output power is more
than 2A
Receiver working voltage
DC-12V, 7V~22V, suggest the output power is more
than 2A
4
3 Introduction
3.1 Disclaimer
Thanks for purchasing the DVLM-100 from Wuxi R2TECK. Everyone need to read and understand
this disclaimer before using the DVLM-100. You are supposed to be accepted the disclaimer once the
product is started to use. Please comply with the installation and using process indicated in this use
manual. Wuxi R2TECK will not be responsible for the consequence of the improper use, improper install,
improper modify.
The product name, brand mentioned here are belong to R2TECK.
3.2 Profile
This use manual as the instruction of Full-HD Digital Video Transmission system DVLM-100, the
components and functions mentioned here may not be the standard spec. please check the enclosed list
with the product, please contact with the dealer if you have any question
The right of the manual write, modify and release only belong to Wuxi R2TECK, Without the
authorization of Wuxi R2TECK, this use manual could not be copied or modified or released
The information in this manual is only for DVLM-100 Full-HD Digital Video Transmission System.
This manual is subject to change without prior notice.
Version
profile code & version
release date
RR.H.0003. 0017. V01
2017.10
3.3 Intended usage
DVLM-100 use for wireless Full-HD Digital Video transmission
3.4 Caution
The effectiveness of the use product is subject to if comply with operate and maintain
direction in this manual.
Before start the product, the staff must make sure the operate process and condition is
correct. specially to check the product cables are good or not, if the cable is damaged,
please change it before start the product.
5
DVM-100 is intended to use on the film and other Full-HD digital video transmission.
DVLM-1 may not be reached the defined function if it works in the improper temperature,
improper humidity and improver air pressure.
DVLM-100 should not work when it is wet. Have to make sure it is dry when you use it.
DVLM-100 is the high precise product, it is forbid to beat and clash.
Product life time is 2 years, quality warranty is 1 year.
Manufacture and dealer are responsible for the product maintenance, without the
authorization, please don't fix the product and don't modify the product.
6
4. Product overview
4.1 Brief introduction
DVLM-100 is the 1080p full-HD Digital Video transmission system which including transmitter and
receiver, it transmit the video, audio, image and more information by the wireless communication mode.
DVLM-100 is perfect for all fields video transmission because of the light weight, low power, long distance,
low latency.
4.2 Standard spec
4.2.1 product main part
Transmitter x 1
Receiver x 1
Transmitter antenna x 2
Receiver antenna x 2
Receiver mobile antenna x 2
4.2.2 Transmitter cable
HDMI cable (D-D) x 1
Camera HDMI cable
7
4.2.3 Receiver cable
Hot shoes
5. Port definition
5.1 Transmitter port
5.1.1 Back side
5.1.1.1
[1]: For frequency switch setting
Press the button more than 5 seconds, 3 lights (HDMI, LINK, WORK) are all turn-off, release the
key, 3 lights flash as 0.5Hz frequency, and then 3 lights back to normal state, that means
channel change is finished. If devices not connected yet after 10 seconds of frequency switch
process, please switch again. The frequency supported by device as below：
5180
5220
5260
5320
5520
5540
5560
5580
5600
5620
5640
5660
5680
5700
[2]: For bind the Transmitter and receiver.
Press the button more than 5 seconds, 3 lights (HDMI, LINK, WORK) are all turn-off, then 3
lights flash one by one, when the LED light works well that means they are well bind. This may
takes 2 minutes. If the connection has not been resumed after 2 minutes, repower on both ends,
and don’t need rebind.
8
5.1.2 Right side port
5.1.2.1
HDMI port: for connecting with the camera.
Power port: Power button.
Work light: for monitoring the Transmitter working status.
Light status
Description
Action
Flash
regularly
Transmitter works well
NA
other status
Transmitter does not work
Connect the system to the
power again, or contact with
the customer service.
Link light, for monitoring the status of connect with the receiver.
Light status
Description
Action
Turn-on
Connect with receiver well
NA
Turn-off
Does not connect with receiver
1. Please wait for connecting
2. Make sure the receiver is
connected the power.
3. Bind the Transmitter and
receiver again
4. Connect the power again
HDMI light, for monitoring the camera status.
Light status
Description
Action
Turn-on
Camera connect well
NA
Turn-off
Camera does not connect
check camera cable position
Flash
Camera output format is not
correct
check camera output format
setting
Table des matières
Autres manuels R2TECK Extenseur
