R-Go Riser Attachable Manuel utilisateur
1
R-Go Riser
Attachable
RGORIATBL
English manual p.2
Deutsche Anleitung p.8
Manuel en français p.14
Nederlandse handleiding p.20
2
ergonomic
laptop stand
R-Go Riser Attachable
3
Product overview
3M Dual Lock TM
01 R-Go Riser Attachable
02 3M Dual Lock sticker 4x
03 Foam sticker square 4x
04 Foam sticker round 1x
05 Foam sticker oval 2x
06 Rubber antislip cap 4x
01
02 04
06
03
05
4
3M Dual Lock TM
Setup
Step A
Place the rubber
antislip caps on the
corners of the logo
side of the laptop
stand.
Step B
Turn the stand, and place
the 3M Dual Lock stickers
and rectangular foam
stickers on the indicated
places on the stand.
4x
4x 2x
5
*
Setup
Step C
Peel off the protection
layer of the 3M Dual Lock
stickers.
Optional If your laptop has large anti-slip pads sticking
out, you can add extra square foam stickers to fill up the
excesive space. Place the foam stickers on top of the 3M
Dual Lock stickers. Caution: place the foam stickers on the
3M Dual Lock stickers in such a way that the peel-off layer
is on the top side, see below*.
Foam sticker with
peel-off layer on
top side
3M Dual Lock
sticker
Bottom side laptop
4x
6
Setup
Step D
Place the laptop stand
on the bottom side of
your laptop.
Step E
Place the blue round foam sticker in the hole of the laptop
stand with protection layer removed. Press down the
laptop stand, making sure that the sticker stays properly
on the bottom of the laptop. You can open the laptop
stand again. It is now ready for use!
4x
7
Final product
For more information
about this product,
scan the QR code!
https://r-go.tools/riatt_web_en
In height
adjustable!
8
Ergonomischer
Laptop-Ständer
R-Go Riser Attachable
9
Ergonomischer
Laptop-Ständer
Inhalt
3M Dual Lock TM
01 R-Go Riser Attachable
02 3M Dual Lock Aufkleber 4x
03 Schaumstoffaufkleber quadratisch 4x
04 Schaumstoffaufkleber rund 1x
05 Schaumstoffaufkleber oval 2x
06 Gummi antirutsch Kappe 4x
01
02 04
06
03
05
10
3M Dual Lock TM
Installation
Schritt A
Bringen Sie die
gummi antirutsch
Kappe an den Ecken
der Logo-Seite des
Laptop-Ständers an.
Schritt B
Drehen Sie den Ständer
und bringen Sie die 3M
Dual Lock-Aufkleber
und die rechteckigen
Schaumstoffaufkleber an
den angedeuteten Stellen
des Ständers an.
4x
4x 2x
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels R-Go Accessoires pour ordinateur portable
