Qwic D9.1 Manuel utilisateur
USER MANUAL
ELECTRIC BICYCLES
FRAME NUMMERS (VIN) (BARCODE)
The Framenumber (VIN) is located on the le side of the frame, down at the
boom bracket, below the barcode.
Colophon
Manual electric bicycles
QWIC reserves the right to make changes in specicaons and / or prices
without noce. This manual has been compiled with great care. QWIC can
not be held responsible for any inaccuracies whatsoever.
Publishers & copyright ©: QWIC, Amsterdam
Your bike may dier from the illustraons in this manual.
Mijn framenummer: E F Y _ _ _ _ _ _ _
1
QWIC Electric Bicycle Manual
Congratulaons!
You have just become the proud owner of a QWIC electric bike. You probably only
want one thing right now: Get out and ride! Before you jump in your seat, we
encourage you to take a moment to read through this manual. Then you know
everything that is needed for many carefree cycling tours.
Want to know more?
For more informaon and the latest news, please visit our website or follow us on
facebook.
www.qwic.nl / www.qwic.eu
2
QWIC Electric Bicycle Manual
Table of contents
1. Display 4
1.1 Information on the screen
1.2 Menu
1.3 (Display-)lightning
1.4 Seng pedal assistance on and o
1.5 ‘Walk assist’ function
1.6 Timer / Tripdistance reset
1.7 Failure codes
1.8 Switching off
1.9 Wheel sizes (mm)
2. Battery 7
2.1 Range
2.2 Baery disconnecng and removal
2.3 Battery charging
2.4 Further informaon on your baery
3 Cycling with power assistance 11
3.1 Wat is Trapbekrachtiging?
3.2 Seng pedal assistance on and o
3.3 Further informaon on pedal assistance
4 Folding Smart-e413
5 Seatpost & Saddle 14
5.1 Saddle height
5.2 Adjusting saddle height
6 Steering wheel 15
6.1 Steering wheel height
6.2 Adjusting steering wheel height
7 Lightning 16
7.1 Setting lighning on and off
3
QWIC Electric Bicycle Manual
8 Brakes 17
8.1 Adjusting brakes
8.2 Additional information rollerbrakes
8.3 Additional information V-brakes
9 Tires 17
9.1 Tire pression
10 Gears 18
10.1 Shifting gears
11 Lock 18
11.1 Additional information lock
12 Maintenance 19
12.1 General maintenance
12.2 Cleaning
12.3 Treatment
12.4 general inspection
12.5 Roadworthy inspection
12.6 Service check-up
12.7 Big maintenance check-up
12.8 Service chart
13 Warnings 24
14 Warranty 25
4
QWIC Electric Bicycle Manual
1.1 Screen information
The display will only work if the battery is in the bike. Switch the display on with the
‘ON / OFF’ Button
1. On / Off & (Screen) Lighting 7. Assistance level
2. Selection options & Menu 8. Energy consumption indicator
3. Power level up & Walk assist 9. Menu
4. Power level down 10. Menu icons
5. Accu indicator 11. USB (not working)
6. Speed
SET
+
-
g. 1.1
2
3
4
5 6
7
8
9
10
11
Totaal afstand
Total distance traveled by bicycle
Resetting is not possible
Timer
Effective driven time since last reset
Reset: ‘MINUS’ 3 sec. pressed
Trip afstand
Driven distance since last reset
Reset: ‘MINUS’ 3 sec. pressed
Maximum speed
Maximum driven speed
Shuffle mode
Shuffle through the four options above
Tiresize
Keep ‘SET’ 10 sec. pressed and then set
with ‘PLUS’ and ‘MINUS’ the desired
tiresize. (see table 1.9)
1
Failure
See 1.3 for failure codes overview
1 Display
5
QWIC Electric Bicycle Manual
1.2 Menu
Selecting Menus
Press and release ‘SET’ and then use the ‘PLUS’ and ‘MINUS’ buons to switch
between the menus. Press ‘SET’ to hold this funcon.
1.3 Screen lightning
Press the ‘ON/OFF’ buon to turn on the (screen) lighng. Press ‘ON/OFF’ again to
turn it o again. When you turn on the screen light, the front and rear light will turn
automacally on as well. They work as well on the baery, so no extra baeries are
required.
1.4 Adjusting the pedal assistance
Use the ‘PLUS’ and ‘MINUS’ buons to select the assistance programs (0 - 8). Power
level 8 gives the strongest assistance. In power level 0 the motor gives no assistance
but you can use the display of the bike. Please note that the baery runs out of
power faster when using a high power level than with a low power level.
1.5 Controlling the Walk-Assist
Use the Walk Assist feature to easily take the bicycle by the hand, by for example
taking it out of a bicycle cellar.
Stand rmly next to the bike and hold your hands on the wheel. If the is a brake
lever present, keep at least one hand on the brake where the brake-circuitbreaker
(interrupon of the motor assistance) is present.
In general, this is the le brake lever. Keep the ‘PLUS’ buon pressed while rmly
holding the steering wheel. Aer a few seconds the engine starts. Once you release
the ‘PLUS’ buon the Walk Assist funcon switches itself o. The Walk Assist had a
speed of 3 Km/h.
1.6 Error codes
Code 01: Problem with 3-phase control from the controller of motor
Code 02: Problem with throle connecon (not in use)
Code 03: Motorcable 3-phase wiring loose or defecve
Code 04: Motorcable Hall Sensor signal Malfuncon(Malfuncon in motor or
motorcable)
Code 05: Malfuncon in brake sensor(signal)
Code 06: Baery voltage too low
Code 07: Motorcable is connected incorrectly
Code 08: Malfuncon in display cable
Code 09: Malfuncon in pedalsensor(signal)
Code 10: Malfuncon in display cable
6
QWIC Electric Bicycle Manual
1.7 Switching on/o
Press the ‘ON/OFF’ buon for 2 seconds to turn o the system. The control panel
can be used only when the baery is connected to the bike. When the display is
turned o while riding the bike, or when riding without baery, it is possible that
random values are displayed as the motor generates light powerstreams. Everything
that appears on the display whan the system is not acvated, can be ignored.
1.8 Tire size / Wheel size (mm)
Seng the correct resize (mm) can be done by pressing the ‘SET’ buon for 10
seconds. *The pre-set sizes can have a small deviaon. This means that the amount
of driven kilometers deviates maximum 5%.
E-bike ETRTO setting
Smart-e foldable bike 53-406 20x1.95 1590*
Trend 3+ / Trend 3 Lite 40-622 28x1.5 2224*
Urban 3 50-622 28x2.00 2268*
7
QWIC Electric Bicycle Manual
2 Battery
2.1 Range
How great is the range of my electric bike?
The total distance that you can travel per trip with you QWIC e-bike without
recharging in between is the range. To assess this properly, you should leave the bike
/ baery a whole night on the charger. The range should be measured during one
trip and not spread over several days.
* Baeries run slowly empty even if the bicycle is not used. If the baery is
connected to the bike it will run out of power faster than if it is taken out and stored
inside.
Capacity baery
The amount of enery in a baery is expressed in Wa-hours (Wh). The number of
Wa-hours is calculated by mulplying the number of Ampere-hours (Ah) mes the
nominal Voltage (36V). The higher the amount of Wa-hours, the higher the range!
Calculaon example: Suppose your baery has a capacity of 10 Ah and a voltage 36
Volts. This baery delivers: 10 Ah x 36V = 360 Wh.
QWIC provides bikes with 216 Wh, 360 Wh and 432 Wh baeries. Which baery you
have, you can read at the boom of the baery. The following chart is an indicaon
of the expected range per baery type.
Wh Expected range**
216 30 - 60 km
288* 40 - 70 km
360 50 - 100 km
432 70 - 130 km
* Only available on certain foldable bicycles
** Measured on a at roadsurface under average condions and with an outside
temperature of about 20 degrees, with an average speed of about 20 km/h and a
total of approximately 75kg load. No rights can be derived from these values.
There is a number of inuencing factors which can signicantly shorten the range.
Many of these factors can be overcome, so that the range is posively aected. Ask
your dealer for personal advice.
8
QWIC Electric Bicycle Manual
Range of QWIC electric bicycles
Factors inuencing range:
* The total weight (weight of bike + rider + cargo)
* The resistance (wind, re pressure, speed, road condions and altude
dierences)
* Your driving behavior (mely shiing up and down and driven speed)
* The outside temperature
* Baery age (baery capacity decreases as the baery ages)
* The use of the power assistance programs (see gure below)
WARNING! Each year the capacity will decrease with a maximum of
15%. This depends on the amount of charging
g. 2.1 g. 2.2
2.2 Detaching the battery
On the le rear of your bike is the baery lock. This lets you lock the baery to the
bike or lets you take it out. You can use the same key as the ring lock. To unlock:
insert the key in the lock and turn it counterclockwise. Use the handle on the
boom of the baery in order to take it out.
Remove the key when you slide the baery back in. By sliding the baery fully back
you will hear a click and the baery is locked. Locking can also be done with the key
in it, by turning the key clockwise aer placing the baery. (g. 2.1 and g. 2.2)
With the Smart-e foldable bicycle the battery lock is at left side on top of the
battery. By flipping the saddle with the handle bar, the battery is easy to remove.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Qwic Vélo
