Qvis AMB-MB Manuel utilisateur
AMB-MB
AMB-MB2
AMB-MB3
1.3 / 2 / 3 MEGA PIXEL BULLET IP CAMERAS
User’s Manual
V2.0 06 / 2014
i
ii
Welcome
Thank you for purchasing the:
1.3, 2 or 3 Mega Pixel Bullet IP Cameras
This user’s manual is designed to be a reference tool for the installation and
operation of your system.
Here you can find information about the corresponding IP camera’s features
and functions, as well as a detailed installation method.
Before installation and operation please read the following safeguards
and warnings carefully!
iii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The power supply shall conform to the requirement in the SELV (Safety Extra Low Voltage) and
must make sure that the limited power source is rated 12V DC or 24V AC.
Please note: Do not connect two power supplying sources to the device at the same time; it
may result in device damage!
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation Security
Please ensure that the product does not endure heavy stresses, violent vibration or contact with
water during transportation, storage and installation.
Please use the original packing material (or the material of the same quality) if you need to return it
to vendor.
3．Installation
Do not apply power to the product before completing installation.
Do not put object(s) on the product.
Please install a proper power cut-off device during the installation connection.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers. We are not
liable for any problems caused by unauthorised modifications or attempted repair.
5. Environment
This product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
Please keep it away from environments that contain electromagnetic radiation or objects that
produce it.
Please keep sound ventilation around the device at all times.
Do not allow the water and other liquid to penetrate into the device if casing has been
compromised. This series product complies with the IP66 standard specified in the Degrees of
Protection Provided by Enclosure.
Ensure lightning surge protection is in place to make sure you fully protect camera circuitry from
electrical overload.
iv
Please make sure the CCD (CMOS) component is away from the radiation of the laser beam
device. Otherwise it may result in CCD (CMOS) optical component damage.
It is recommended that the grounding studs of the product should be grounded, so to further
enhance the reliability of the camera.
6. Daily Maintenance
Please shut down the device and then unplug the power cable before you begin any maintenance
work.
Do not touch the CCD (CMOS) optic component. Please use an air jet to clean the dust off the lens
surface. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
When the camera is not in use please put the dustproof cap to protect the CCD (CMOS)
component.
Do not use volatile solvent such as the benzene, paint thinner or detergent with the ability to
abrade surfaces. It may result in lens damage or adversely affect the device’s performance.
7. Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included. Contact
your local retailer/vendor ASAP if something is missing.
8. Box Contents:
Accessory Name
Amount
Network Camera Unit
1
User’s Manual
1
Installation Accessories Bag
1
CD
1
v
Table of Contents
1General Introduction ..................................................................................................................1
1.1 Overview........................................................................................................................1
1.2 Features.........................................................................................................................1
1.3 Specifications................................................................................................................2
1.3.1 Performance...........................................................................................................2
2Structure ......................................................................................................................................5
2.1 Multiple-function Combination Cable ........................................................................5
2.2 Framework and Dimension.........................................................................................6
3Device Installation ......................................................................................................................7
4Quick Configuration Tool...........................................................................................................9
4.1 Overview........................................................................................................................9
4.2 Operation .......................................................................................................................9
5Web Operation..........................................................................................................................12
5.1 Network Connection...................................................................................................12
5.2 Login and Logout........................................................................................................12
6FAQ ............................................................................................................................................15
© Copyright Qvis ®. All documentation rights reserved.
1
1 General Introduction
1.1 Overview
This network camera integrates traditional camera and network video technology. It adopts both audio and
video data collection and transmission simultaneously. Because of inbuilt internal hardware it can connect
to a network directly without any auxiliary device. When you want to access the camera, you can use a web
browser running off the network at the client-end. Due to its multiple functions it allows for various use in
many environments such office, bank, road & traffic monitoring, etc.
The latest chipset technology incorporated within the camera design requires low amounts of power to
obtain the best video image clarity. Energy efficiency is a key element to this product, but at the same time
it does not compromise on performance.
This series network camera product uses the latest industry standard H.264 video and G.711a audio
compression technology, which guarantee the best audio and video quality whilst reducing file sizes.
One of the other main features this camera includes is the IR night vision, which aids in video surveillance
when the camera is functioning within a low illumination environment. The LED IRs highlight objects of
interest within the camera’s field of view and is then able to filter out any visual interference so that you can
easily view footage upon a monitor. It supports real-time monitor and listening at the same time via the
inbuilt microphone. If you want to communicate with a person(s) in view of the camera it also supports dual-
way bidirectional talk.
The built-in protection enclosure and waterproof design conforms to the IP 66 level. It has the sound
waterproof function suitable for use in the outdoor environments.
1.2 Features
User
Management
Different user rights for each group, one user belongs to one group.
The user’s right shall not exceed the group right.
Storage
Function
Supports:
Central server backup function in accordance with your configuration and
setup in alarm or schedule setting
Recording via the Web and sending the recorded file to the storage at the
client-end’s PC.
Network storage function such as FTP.
Network
Monitor
Network camera supports one-channel audio/video data transmission to
network terminal and then decodes signal. Delay is within 270ms (network
bandwidth support needed)
Supports a maximum of 20 connections.
Adopts the following audio and video transmission protocols: HTTP, TCP,
UDP, MULTICAST, RTP/RTCP, RTSP, etc.
Supports web access.
Network
Management
Allows network camera configuration and management via Ethernet.
Supports device management via web or client-end.
Power
External power adapter DC12V.
Supports s PoE supply
© Copyright Qvis ®. All documentation rights reserved.
2
Warning！
Do not connect these two power supplying sources to the device at the same
time; it may result in device damage!
Please note: system cannot support these two types of power supplying at the same
time. As a recommendation, if you wish for your security system to be continue to run
when there is a loss of power or unstable electrical supply coming from the mains, a
UPS system should be installed.
Assistant
Function
Log function
Supports system resource information and running status real-time display.
Day/Night mode auto switch.
Supports picture parameter setup such as electronic shutter and gain setup.
Supports motion detection.
Backlight compensation: screen auto split allows backlight compensation to
adjust the brightness.
Supports video watermark function to avoid vicious video modification.
Built in IR light to aid with night vision fuction.
Digital WDR (Wide Dynamic Range)
The enclosure conforms to the IP66 protection testing. It can withstand a
variety of weather conditions and outdoor environments.
1.3 Specifications
1.3.1 Performance
Please refer to the following sheet for network camera performance specification:
Model
Parameter
AMB-MB3
AMB-MB2
AMB-MB
System
Main Processor
Ambarella A5s high performance DSP
OS
Embedded LINUX
System
Resources
Support real-time network, local record, and remote operation at the
same time.
User Interface
Remote operation interface such as WEB, PSS
System Status
Bit stream statistics, log, and software version.
Video Parameter
Image Sensor
1/3” CMOS
1/2.8" CMOS
1/3 " CMOS
Pixel
2048(H)*1536(V)
1920(H)*1080(V)
1280 (H)*960 (V)
Gain Control
Fixed/Auto
White Balance
Manual/Auto
Exposure Mode
Manual/Auto
PAL: It ranges from 1/4 to 1/10000
NTSC: It ranges from 1/3 to 1/10000
Video
Compression
Standard
H264/ H.264B/MJPEG
© Copyright Qvis ®. All documentation rights reserved.
3
Video Frame
Rate
PAL:
Main stream 1,
(2048*1536@20fps)
, Extra stream1,
(704*576@25fps)
Extra Stream 2,
(1280*720@11fps)
Main stream 2,
(1920*1080@25fps)
Extra stream 1,
(704*576@25fps)
Extra Stream 2,
(1280*720@11fps)
NTSC:
Main stream 1,
(2048*1536@20fps)
Extra stream1,
(704*480@25fps)
Extra Stream 2,
(1280*720@11fps)
Main stream 2,
(1920*1080@25fps)
Extra stream 1,
(704*480@25fps)
Extra Stream 2,
(1280*720@11fps)
PAL:
Main stream
(1920*1080@25fps)
extra stream
(704*576@25fps)
NTSC:
Main stream
(1920*1080@30fps)
extra stream
(704*480@30fps)
PAL:
Main stream
(1280*960@15fps)，
extra stream
(352*288@15fps)
Main stream
(1280*720@25fps)，
extra stream
(704*576@25fps)
NTSC:
Main stream
(1280*960@15fps)，
extra stream
(352*240@15fps)
Main stream
(1280*720@30fps)，
extra stream
(704*480@30fps)
Video Bit Rate
H.264H: 40Kbps-
8192Kbps adjustable
MJPEG: 40Kbps-
16384Kbps
adjustable and bit
rate is adjustable.
H.264: 56Kbps-
8192Kbps.
MJPEG is adjustable
and bit rate is
adjustable. Support
customised setup.
H.264: 56Kbps-
6144Kbps.
MJPEG is adjustable
and bit rate is
adjustable.
Support customized
setup.
Video Flip
Support mirror.
Support flip function.
Snapshot
Max 1f/s snapshot. File extension name is JPEG.
Privacy Mask
Supports max 4 privacy mask zones
Video Setup
Support parameter setup such as bright, contrast.
Video
Information
Channel title, time title, motion detect, camera masking.
Lens
3.6mm Fixed focus.
Lens Interface
M12. Lens is the default accessories
Video
Motion Detect
396 (18*22) detection zones；sensitivity level ranges from 1 to 6 (The
6th level has the highest sensitivity)
Activation event: video storage, image snapshot, log, email function
and etc.
Record
and
Backup
Storage
Management
Support display local storage status
Networ
k
Wire Network
1- Channel wire Ethernet port, 10/100 Base-T Ethernet
Network Protocol
Standard HTTP, TCP/IP, ARP, IGMP, ICMP, RTSP, RTP,UDP, RTCP,
SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour,
SNMP.
© Copyright Qvis ®. All documentation rights reserved.
4
Remote
Operation
Monitor, system setup, file download, log information, maintenance ,
upgrade, etc.
Restore Default
Setup
Reset button (on LED panel)
IR light
IR light 20-30M.
General Parameter
Power
DC 12V power and PoE.
Power
Consumption
6.5 W MAX
6W MAX
Working
Temperature
-20oC~+60 oC
Working
Humidify
≤90%
Dimensions(mm)
70*66*160
62.9*64.3*146.8
Weight
500g（Excluding box）
Installation
Bracket installation
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Qvis Caméra IP
Qvis
Qvis APOHDSDI-MB Manuel utilisateur
Qvis
Qvis APOIP-MD1.3 Manuel utilisateur
Qvis
Qvis APOHDSDI-VAN Manuel utilisateur
Qvis
Qvis HOMECAM1WIFI Manuel utilisateur
Qvis
Qvis AMB-BL Manuel utilisateur
Qvis
Qvis AMB-EYE1.3 Manuel utilisateur
Qvis
Qvis Homecam1 Manuel utilisateur
Qvis
Qvis APOIP-BL Manuel utilisateur
Qvis
Qvis APOIP-VAN Manuel utilisateur
