Quooker COMBI Manuel utilisateur
Installation guide COMBI
Read this guide before installation
Introduction
The operation of the Quooker COMBI
The Quooker system consists of a vacuum-insulated tank, which is connected to the cold water
supply under the sink and to the Nordic single tap, the Fusion tap or the Flex tap. Both boiling
water and mixer water can be dispensed from the Fusion and Flex tap.
Inside the tank the water is heated electrically to approx. 108 °C and is kept at this temperature.
When boiling water is dispensed, cold water ows back into the tank at the same time and is
heated automatically. If the entire content of boiling water (7 litres) is used in one go, the heating
time is ca. 20 min.
Before the water leaves the tank it is puried by the HiTAC® water lter (High Temperature
Activated Carbon). To extend the life of the lter, the water used for mixing the hot water is
not ltered.
In addition to boiling water, the Quooker COMBI also supplies instant hot water. The COMBI
supplies hot water by mixing boiling water from the Quooker tank with cold water from the water
mains inside the mixing valve. A thermostatic control element inside the valve keeps the outgoing
water temperature constant. This temperature can be set between 40 °C and 60 °C with the grey
knob on the mixing valve. The mixing valve is suitably protected against a loss in water pressure,
preventing any boiling water from owing out of the mixer tap.
The light ring on the tap lights up when the water is running to warn the user that the water is
boiling. As an additional safety feature, the Nordic single tap is height-adjustable and the Nordic
single tap, the Fusion tap and the Flex tap are fully insulated.
Despite all the safety features incorporated in the product, anyone using the Quooker system
must keep in mind the risks of using boiling water in general. Incorrect use can lead to injury.
Therefore always read the manual carefully before use.
Installation, maintenance and warranty
Installing the Quooker system requires connections to the mains water supply and the electrical
system. The Quooker system is supplied with a handy connection kit for simple installation. You
must not connect the Quooker system to a reverse osmosis system or to a water softener that
reduces the pH value.
For optimally puried Quooker boiling water, we recommend changing the HiTAC® lter cartridge
every 3 - 5 years. If necessary, the tank can be descaled. In areas with hard water this should be
performed more regularly.
The warranty period is two years, according to our General Terms of Business.
Users
The Quooker tap can be used by children above the age of eight and people with diminished
physical, sensory or intellectual abilities provided they are supervised or have been instructed
on the safe use of the device. Inform people who are unfamiliar with the Quooker system about
safe use and the possible dangers associated with the use of the boiling-water tap. Please note:
incorrect use may result in injury. Prevent children from using the tap as a toy and do not
allow children to clean or maintain the product unsupervised. Keep the plug out of reach
of small children.
The Quooker system is suitable for household use and commercial use such as in sta kitchens
at shops, oces, farms and other business premises and for use by visitors at hotels, motels,
bed & breakfasts and other residential accommodation.
Always follow the installation method described in the manual. Avoid spilling water on the plug.
If defective, the power plug may only be replaced by a qualied technician. Make sure you let
the tank cool o adequately before disconnecting it. The fastest way to do this is as follows: turn
o the Quooker system, but leave the plug in the socket. Then open the boiling-water tap and turn
it o once the water runs cold. You can nd a more detailed explanation for disconnecting the
tank in chapter E.
Tips for use and the installation manual can also be found on our website: quooker.co.uk
Declaration of Conformity (UK)
Quooker Nederland B.V., Staalstraat 1, 2984 AJ Ridderkerk (The Netherlands) herewith declares,
on our own responsibility, that the products Quooker COMBI and Quooker COMBI+ are in
accordance with the conditions of the following regulations:
- The Electrical Equipment (Safety) Regulations 2016
- The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
- Electromagnetic Compatibility Regulations 2016
- Ecodesign for Energy-Related Products Regulations 2010
and comply with the following standards:
General product safety household and similar electrical appliances
BS EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A2:2019 + A14:2019
BS EN 60335-2-15:2016 + A11:2018
Electromagnetic Compatibility Regulations
BS EN 55014-1:2017 + A11:2020
BS EN 55014-2:2015 + BS EN 55014-2:2021
BS EN 61000-3-2:2014 + BS EN 61000-3-2:2019
BS EN 61000-3-3:2013 + A1:2019
Restriction of hazardous substances
BS EN IEC 63000:2018
Ecodesign water heaters
The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit)
Regulations 2019
BS EN 50440:2015
The Netherlands, Ridderkerk, 18 July 2022
Walter Peteri, Managing Director
United Kingdom, Manchester, 18 July 2022
UK Authorised Representative
Quooker UK Ltd.
Beaumont Buildings
Great Ducie street
Manchester M3 1PQ
+44 345 833 3333
Stephen Johnson, Managing Director
Declaration of Conformity (EU)
Quooker Nederland B.V., Staalstraat 1, 2984 AJ Ridderkerk (The Netherlands) herewith declares,
on our own responsibility, that the products Quooker COMBI and Quooker COMBI+ are in
accordance with the conditions of the following directives:
- 2014/35/EU Low Voltage Directive (LVD)
- 2011/65/EU Restriction of Hazardous Substances (RoHS) Directive
- 2014/30/EU Electromagnetic Compatibility Directive (EMCD)
- 2009/125/EC Ecodesign energy-related products Directive
and comply with the following standards:
General product safety household and similar electrical appliances
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A2:2019 + A14:2019
EN 60335-2-15:2016 + A11:2018
Electromagnetic compatibility (EMC)
EN 55014-1:2017 + A11:2020
EN 55014-2:2015 + EN 55014-2:2021
EN 61000-3-2:2014 + EN 61000-3-2:2019
EN 61000-3-3:2013 + A1:2019
Restriction of hazardous substances
EN IEC 63000:2018
Ecodesign water heaters
EN 50440:2015
The Netherlands, Ridderkerk, 18 July 2022
Walter Peteri, Managing Director
Technical specications
Tank COMBI
Voltage 230 V
Wattage* 2200 W
Capacity 7 litres
Heating-up time* 20 minutes
Standby power consumption* 10 W
Tank height 50 cm
Total tank height requirement 57 cm
Tank diameter 20 cm
Min. mains pressure 200 kPa (2 bar)
Max. mains pressure 600 kPa (6 bar)
Max. working pressure 800 kPa (8 bar)
Mounting bracket optional yes
Safety features - maximum temperature fuse
- pressure relief valve in solenoid valve 800 kPa (8 bar)
HiTAC® water lter High Temperature Activated Carbon
*These are average values.
Energy label
Declared load prole XXS
Water heating energy
eciency class A
Water heating energy eciency 36%
Annual electricity consumption 511 kWh/A
Hot water temperature
settings of the water heater 40 °C - 60 °C
Sound power level - dB
Tap Nordic Fusion, Flex
single tap and mixer tap
Tap hole size 32 mm 35 mm
Recomm. temp. hot water - 60 °C
Bezel available yes yes
Contents of the pack
1. - Nordic single tap, bre washer, centring ring, metal ring, threaded ring, and two screws
- or Fusion tap, hoses, bre washer, brass xing plate, xing nut, white tap support (for thin
work tops), and two inlet hose screens
- or Flex tap, hoses, bre washer, metal ring, threaded ring with two screws, counterweight
with boiling water hose, white tap support (for thin work tops), two inlet hose screens, and
quick-release tool.
1
Fusion
Flex
Nordic single tap
2. COMBI tank
3. Inlet reducing valve, inlet hose screens and bre washer
4. Isolation valve with lter
5. Mixing valve and check valve
2
4
3
5
Overview of Nordic single tap installation
It is recommended that you install the Quooker system in the following order:
A. Drilling hole
B1. Fitting Nordic single tap
C. Connecting water
D. Connecting tank
Note: Bear in mind that the tank, mixing valve and socket must remain accessible for servicing.
For an overview of the Fusion tap installation, please refer to the next page and for the Flex tap to
the page after that.
Cold
A B1
C
D
Overview of Fusion tap installation
It is recommended that you install the Quooker system in the following order:
A. Drilling hole
B2. Fitting Fusion tap
C. Connecting water
D. Connecting tank
Note: Bear in mind that the tank, mixing valve and socket must remain accessible for servicing.
For an overview of the Flex tap installation, please refer to the next page.
Cold
A B2
C
D
Autres manuels pour COMBI
2
Table des matières
Autres manuels Quooker Produits de plomberie
Quooker
Quooker PRO3-VAQ B Manuel utilisateur
Quooker
Quooker Nordic Instructions de montage
Quooker
Quooker PRO3 Manuel utilisateur
Quooker
Quooker Swap Mode d’emploi
Quooker
Quooker PRO3 Manuel utilisateur
Quooker
Quooker PRO3 Manuel utilisateur
Quooker
Quooker Swap Manuel utilisateur
Quooker
Quooker Scale Control Plus Manuel utilisateur
Quooker
Quooker COMBI Manuel utilisateur
