Quilt EZ King Quilter II Manuel utilisateur
King Quilter II Installation Instructions
1. Tablet Bracket
Remove the two tablet bracket screws as
pictured.
Align Butler tablet bracket as pictured and
replace tablet bracket screws.
Butler tablet should appear as pictured.
**Note: Do not remove this screw.
Connect micro USB and DC connectors of the
remote cable to the tablet as pictured. The
opposite end of the remote cable will connect
to the Butler in the remote port.
2. Handlebar Cable
Connect the USB connector of the handlebar
cable to the King Quilter II as pictured. The
opposite end of the handlebar cable will
connect to the Butler in the handlebar port.
How to Attach
Butler Robotics to a
Handi Quilter/Baby lock
with Studio, Fusion,
Pearl, or Momentum
Frame
Revision: 6/23/16
Page 2
Bag # Contents Picture
Z3 1 - Motor Pulley Cover
2 - Nuts (M5 K-Lock)
Cables Vary by machine
Z1 5- Plastic Anchors
2- Screw (M5 x 12mm)
2- Washer (M5)
1- Stylus
5-Zip ties
Y1 1 - Black Belt (86”)
4 - Plastic Belt Clamps
4 - Screw (4-40 x 0.5)
X1 1-White belt (12’)
4 - Plastic belt clamps
4 - Screw (4-40 x 0.5)
In order to accommodate all machine types we use universal
parts bags, not all parts will be used in every installation.
Page 3
D5
X7 (Studio Frame)
or
X5 (Pearl/Momentum)
2- X-belt Bracket
2- Eye bolt (M5 x 40mm)
4- Locknut (M5)
Y13 1- Carriage bracket
1- Pan-head screw (#10-24 x
1/4”)
1- umb screw (#10-24 x 1/2”)
2- Pan-head screw (#10-24 x
1/2”)
1- Y-belt bracket
I8 1- Rear idler bracket
1- Tensioner bracket
2- Lock nut (1/4”-20)
2- Machine screw (1/4”-20 x 1”)
1- Pulley assembly
M8 1- Motor box bracket
2- Lock nut (1/4”-20)
2- Screw (1/4”-20 x 1”)
Bag # Contents Picture
1 - Universal Display Bracket
4 - Screw (M6 x 8mm)
4 - Nut (M6)
2 - Screw (8-32 x 0.5)
2 - Poly disc washers
2- Screw (M4 x 20mm)
2- Washer
3- Hex head bolts (M6 x 45mm)
Page 4
Attach the Front Carriage Bracket (Bag M8)
Install the motor box
bracket underneath the
front of the carriage.
Line the holes on
the bracket with the
existing holes on the
carriage.
Fasten in place with
the provided
1/4”-20 x 1” screws
2
Attach the front
carriage bracket to
black motor box
using the provided
M5 x 12mm screws.
1
Front Carriage
Bracket
Black Motor Box
Page 5
Line the idler bracket
with the existing holes
on the rear of the
carriage and attach
it using the provided
1/4”-20 x 1” screws
Attach the Rear Idler Bracket (Bag I8)
1
Idler Bracket
Page 6
Attach the two black
belt brackets together
using the provided
winged screw and
screw.
If the bracket is pres-
installed continue to
step 2.
Install Black Belt (Bag Y1 and Bag Y13)
1Carriage bracket
Y-bracket
Winged-screw
Screw
Insert the winged-
screw from the front
and the normal screw
from the back.
Page 7
Install black belt
assembly to the
underside of the front
carriage wheels.
2
Black Belt Assembly
Black Belt Assembly
Page 8
Use the belt clamps
to attach one side of
the black belt to the
Y-bracket. Make sure
the teeth face away
from the carriage.
See Appendix A for
help with belt clamps.
3
Black Belt
Attach the other
end of the belt to
the Y-bracket using
another belt clamp.
5
Loop the belt around
the motor pulley with
the teeth facing in.
e uninterrupted
length of the belt will
run farther from the
carriage.
en loop the belt
around the rear idler
pulley.
4
Autres manuels Quilt EZ Machine à coudre
