QuietCool GA ES-1500 Manuel utilisateur

SEE // HEAR // FEEL

THE QUIETCOOL DIFFERENCE

ADVANCED WHOLE HOUSE FANS

THE NATURAL CHOICE FOR ENERGY SAVINGS!

OWNER’S GUIDE

GARAGE FAN MODELS

DO NOT THROW AWAY! SERIAL NUMBER FOR FAN IS LOCATED ON

BACK COVER OF OWNER’S GUIDE. RETAIN IN A SAFE PLACE.

QUIETCOOLSYSTEMS.COM

GENERAL SAFETY INSTRUCTIONS

1. Read Instructions - All safety and operation instructions must be read. Failure to read and follow

instructions as stated in this guide may void applicable warranty.

2. Retain Instructions - The safety and operating instructions should be kept for future reference.

3. Heed Warnings - All warnings should be followed.

4. Follow Instructions - All installation and operating instructions should be followed.

5. Heat - The QuietCool system should be situated away from heat sources.

6. Damage Requiring Service - Only qualified service personnel should service the QuietCool system.

The user should not attempt to service the product.

7. Building Codes - Always follow Local Building Codes when installing appliances

CONTENTS

1. SYSTEM OVERVIEW..............................................................1

1.1 Introduction..............................................................1

1.2 Features .................................................................1

1.3 Benefits ..................................................................2

1.4 System Venting Requirements.............................................2

2. INSTALLATION ..................................................................3

2.1 Installing GA Model Fans ..................................................3

3. SETTING UP THE WIRELESS CONTROL ...........................................4

3.1 Wireless Control Wiring....................................................4

3.2 Fan Hub LED Indicators ...................................................6

3.3 Pairing the Wall Switch ....................................................7

3.4 Finding a Location for the Wall Switch .....................................7

3.5 Installing the Wall Switch .................................................8

4. WIRELESS CONTROL OPERATION ................................................8

4.1 Operating the Wall Switch .................................................8

4.2 Frequently Asked Questions ..............................................10

4.3 Wireless RF Control Kit Warranty .........................................11

5. SYSTEM OPERATING INSTRUCTIONS ...........................................12

WARRANTY .......................................................................13

ADVANCED WHOLE HOUSE FANS

QC Manufacturing, Inc.

43352 Business Park Drive

Temecula, CA 92590

PH 951.325.6340

FX 951.325.6351

QuietCoolSystems.com

1-888-QUIETCOOL

1. SYSTEM OVERVIEW

1.1 INTRODUCTION

Congratulations on the purchase of your new QuietCool Specialty Series Fan!

The QuietCool Specialty Series was designed for every application imaginable. QuietCool Specialty Series

fans dominate the market in energy efficiency. Our Specialty Series works great in practically all climate

zones and most homes, mobile homes, and even warehouse buildings!

The QuietCool Garage Fans offer great ventilation options for your garage, man cave, or workshop. We offer

the GA ES-1500 to ventilate both your garage and attic.

And now, the GA ES-1500 is even easier to install with the included Wireless RF Control Kit! Included in the box

is the brand new Wireless RF Control Kit that allows you to turn on your GA ES-1500 from anywhere in your

home, and set it on a timer for up to 12 hours!

1.2 Series Features

• High Efficiency Design

• Designed and Built in California

• 15 Year Warranty

• Garage Fans (GA ES-1500 shown right)

• Included Wireless RF Control Kit

• Control your QuietCool from anywhere in your home

• Set countdown time (up to 12 hours)

• Surface mount wall switch that can be removed

and used from anywhere in the home

1.3 Key Specifications

IT-RFHUB-01 (RF Hub):

Voltage: 120V

Frequency: 60Hz

Motor load: 1HP, 735W (Max)

IT-RFSWITCH-01 (RF Switch):

Voltage: 3VDC (2 AAA batteries)

Battery Standby Current: ≤10uA

RF working distance: 100ft (no obstructions)

QUIETCOOLSYSTEMS.COM

1.4 System Venting Requirements

VERY IMPORTANT! - 1 SQUARE FOOT OF NET FREE VENT AREA PER 750 CFM

RECOMMENDED! - 2 TO 4 SQUARE FEET OF INLET VENTS PER FAN

Venting plays a very significant role in the performace of QuietCool fans. QuietCool recommends a minimum of

1 SQ. FT. of venting for every 750 CFM in the QuietCool system. If an attic has at least 1:750 attic venting, the

QuietCool system will operate efficiently and effectively. If an attic has less than 1:750 attic venting, the

system may not operate as efficiently, or effectively, as it could with 1:750 attic venting. But don’t worry, the

system will still operate if there is not enough venting.

Insufficient venting is a very simple problem to fix. Roofing contractors can add extra venting to most homes

simply and easily. The most common types of venting is shown in the chart below.

Vent Type Model Type Average Size Venting Sq. Ft.

Gable vent 12” x 19.5” 1.20

Dormer Vent 14” x 8” 0.70

Eave Vent

4”

5”

6”

0.03

0.04

0.07

Ridge Vent 4’ - 12’ 0.125 per ft

Soffit Vent

16” x 4”

16” x 6”

16” x 8”

0.19

0.29

0.39

O’Hagin Vent

Low/Medium Profile

Tapered Low Profile

Low Profile Flat

High Profile

0.5

0.6

0.68

Turbine Vent

8”

12”

14”

.35

.79

1.1

*Note: This table is only a guideline and is not a guarantee of venting capacity.

1-888-QUIETCOOL

2. INSTALLATION

2.1 Installing GA (Garage Attic) model fans

VERY IMPORTANT: MINIMUM OF 26” CLEARANCE REQUIRED ABOVE CEILING FOR INSTALLATION OF

GA MODEL FANS. ALWAYS FOLLOW LOCAL BUILDING CODES.

1. Determine in which area you would like to install your QuietCool Garage Attic Fan. Now it’s time to find the

exact location using a stud finder or by going up into the attic and finding the location. Locate the ceiling

studs and mark the location for the fan to be installed. (see Figure 2.1A) One side of the cut out should be

directly next to a wood member for proper fan mounting and support. NOTE: You will need to remove the

ceiling flange from the side of the fan that will be mounted against the wood member.

2. When you find the location, mark a 14 1/4” square using a framing square or template. Make sure you have 2” of

clearance all the way around it. The grille that will be installed later is a 16” square. (see Figure 2.1B)

3. Starting at one corner of the square using a drywall saw, cut out the opening. Remove the drywall cutout and

clear away insulation (if applicable). (see Figure 2.1C)

4. Take the GA fan model into the attic and place it over the ceiling cut out. (see Figure 2.1D)

NOTE: This can be done through the attic access. If you don’t have an attic access, you will need to

remove the ceiling flanges to fit the fan directly through the ceiling cutout.

5. Attach the fan using screws into the ceiling joists. (see Figure 2.1E). Install the ceiling grille. (see Figure

2.1F)

Figure 2.1A Figure 2.1B Figure 2.1C

Figure 2.1D Figure 2.1E Figure 2.1F

QUIETCOOLSYSTEMS.COM

VERY IMPORTANT: CHECK TO MAKE SURE FAN BLADE SPINS FREELY AND THE FIRE DAMPER

CLOSES EASILY. MAKE SURE TO SECURE THE LATCH IN THE OPEN POSITION (AS SHOWN IN FIGURE

2.1D)

AVOID BACKDRAFTS: MAKE SURE THE GARAGE FAN WILL NOT BACKDRAFT COMBUSTION

APPLIANCES IN THE GARAGE. QUIETCOOL GARAGE FANS MOVE LARGE QUANTITIES OF AIR.

3. SETTING UP THE WIRELESS CONTROL

NOTE: Wiring Diagrams are for examples ONLY. Wiring should be done by an experienced

electrician.

NOTE: Your fan may have come with the control pre-wired to a power cord. If this is the case,

simply mount the control box, find a power source in your attic, and plug the fan in. If you

would like to hard-wire the fan, or it is required by your local building codes, please follow the

wiring instructions below.

3.1 Wireless RF Control Kit Wiring

Your fan came pre-wired with the Wireless RF Control Kit. Simply mount the box onto a joist in your attic and plug

in the fan.

However, if your local building codes require you to hardwire your fan, simply remove the power cord and follow the

wiring instructions below.

1. Using a wire nut, connect the black wire from your two wire romex to the black wire from the Hub.

2. Connect the white wire from your two wire romex and the white wire on the fan to the white wire from the

Hub.

3. Connect the black wire from the fan to the blue wire on the Hub

4. Cap the yellow and red wires from the Hub.

5. Ground the green wire from the fan and the green wire from your two wire romex to the ground screw in

the Hub.

6. Set the dip switch positions inside the Hub as shown in the diagram below.

7. Power-on the Hub. The Power LED indicator will be lit.

1-888-QUIETCOOL

Power

Cord

Attach green ground wires to ground screw

All White Common Wires Together

POWER TIMER PAIRTEST

Set dip switches:

1 - ON

2 - OFF

3 - OFF

1 2 3

Whole House Fan

Power

Cord

Attach green ground wires to ground screw

All White Common Wires Together

POWER TIMER PAIRTEST

Set dip switches:

1 - ON

2 - OFF

3 - OFF

1 2 3

Whole House Fan

8. Press the Test button to make sure the fan works. The Test LED indicator will blink once every two seconds

indicating 1-speed and the fan will be on. Press the Test button again and the fan should shut off and the LED

will be off.

9. If the fan doesn’t operate as described in step 8, please check the dip switch postion.

Figure A

QUIETCOOLSYSTEMS.COM

POWER TIMER PAIRTEST

3.2 Fan Hub LED Indicators

Power Indicator

• The Power LED indicator will always be lit when the Hub is

connected to Power.

• If this LED is not lit, check the power source

Timer Indicator

• The Timer LED indicator will light up as shown below:

1. 1 Hour: 1 Blink

2. 2 Hours: 2 Blinks

3. 4 Hours: 4 Blinks

4. 8 Hours: 8 Blinks

5. 12 Hours: 12 Blinks

6. Continuous On: Off

Test Indicator

• The Test LED indicator will light up as shown below when the Test button is pressed and when the fan is

turned on via the Wall Switch:

1. One Speed Fan: blink once every 2 seconds

2. Two Speed Fan: blink twice every 2 seconds

3. Three Speed Fan: blink three times every 2 seconds

Pair Indicator

• The Pair LED indicator will light up when making pair operations. Please see page 12 for details on pairing.

Notes on Operation

• If the Dip Switch is not configured correctly, all the indicators on the Hub will stay solid when the Hub is

powered on. Please switch off power and re-configure the Dip Switch as shown in the wiring diagrams.

1-888-QUIETCOOL

3.3 Pairing the Wall Switch

1. Using a flat-head screwdriver, remove the front cover off the wall switch.

2. Install the included AAA batteries into the switch. All the LED indicators will light up indicating that the switch

has power. Replace the front cover.

3. Press and hold the Pair button on the Hub. The Pair LED indicator will be on for three seconds then turn off. This

clears all previous pairings out of the Hub,

4. Press the Pair button on the Hub twice. The Pair LED indicator will blink once every second indicating the Hub is

in pairing mode.

5. Press either one of the buttons on the Wall Switch to wake it up. Now hold one of the buttons on the switch.

The Pair LED indicator on the Hub will go out and the Wall Switch speed indicators will be blinking indicating

successful pairing. Press the Wall Switch button again, the speed indicators will go out, and it will display the

current fan status.

6. Press the Timer button to test the Wall Switch to make sure it is communicating with the Hub.

NOTE: If a button on the Wall Switch is not pressed within three minutes of pressing the Pair button

on the Hub, the LED indicator on the Hub will go out, indicating unsuccessful pairing. You will need to

go back and repeat steps 4 and 5.

3.4 Finding a Location for the Wall Switch

1. It is very important to find the correct location to install the Wall Switch that will allow the Wall Switch to

communicate with the Hub.

2. Find the location you would like to install the Wall Switch and test that it properly communicates with the fan

to turn the fan on and off.

3. If the fan comes on, this is a good location.

4. If all the LED indicators turn on, the Wall Switch is not communicating with the Hub and you will need to find a

location closer to the fan.

3.5 Installing the Wall Switch

1. Using your hands, slide the Wall Switch off the mounting

plate.

2. If you have an existing Wall Switch with a junction box

installed, install the mounting plate over the junction

box using the oblong holes on the mounting plate. Make

sure you install the mounting plate with the arrow facing

upwards.

3. If you do not have an existing junction box, simply install

the mounting plate to the drywall. Using the included

drywall anchors and screws, mount the plate onto the

drywall through the four mounting holes.

4. OPERATION

4.1 Operating the Wall Switch

Timer Button

• The top button on the switch controls the Timer

functionality of the fan.

• This button must be pressed for the fan to turn on.

• Button Presses:

Speed Button

• The bottom button on the switch controls the speed

functionality of the fan.

1 2 4 8 12

One Press: 1 Hour

Two Presses: 2 Hour

Three Presses: 4 Hours

Four Presses: 8 Hours

Five Presses: 12 Hours

Six Presses: Continuous On

Seven Presses: Off

One Speed Fan

• First press: ON

Two Speed Fan

• First press: HIGH

• Second press: LOW

Three Speed Fan

• First press: HIGH

• Second press: MED

• Third press: Low

Autres manuels pour GA ES-1500

Table des matières

Autres manuels QuietCool Ventilateur

QuietCool

QuietCool AFG ES-1500 Manuel utilisateur

QuietCool

QuietCool AFR SMT ES-2.0 Manuel utilisateur

QuietCool

QuietCool GX ES-1100 Manuel utilisateur

QuietCool

QuietCool ES-4700 Manuel utilisateur

QuietCool

QuietCool AFG PRO-2.0 Manuel utilisateur

QuietCool

QuietCool CL-1500 Manuel utilisateur

QuietCool

QuietCool RM WHF-4.0 Manuel utilisateur

QuietCool

QuietCool QC-1500 Manuel utilisateur

QuietCool

QuietCool AFG SMT-3.0 Manuel utilisateur

QuietCool

QuietCool AFG SLR-40 Manuel utilisateur

QuietCool

QuietCool AFG SMT-3.0 Manuel utilisateur

QuietCool

QuietCool AFR SMT-2.0 Manuel utilisateur

QuietCool

QuietCool TRI PRO-1.5 Manuel utilisateur

QuietCool

QuietCool AFG SMT PRO-2.0 Manuel utilisateur

QuietCool

QuietCool GA ES-1500 Manuel utilisateur

QuietCool

QuietCool STEALTH PRO-1.5X Manuel utilisateur

QuietCool

QuietCool AFG Series Manuel utilisateur

QuietCool

QuietCool QC TRI PRO-1.5X Manuel utilisateur

QuietCool

QuietCool UTF SLR-03 Manuel utilisateur

QuietCool

QuietCool QC 1000 Manuel utilisateur

QuietCool

QuietCool GA ES-1500 Manuel utilisateur

QuietCool

QuietCool AFR SMT PRO-1.3 Manuel utilisateur

QuietCool

QuietCool AFG ES-1500 Manuel utilisateur

QuietCool

QuietCool QC 1000 Manuel utilisateur

Manuels Ventilateur populaires d'autres marques

ELTA FANS

ELTA FANS H03VV-F Manuel utilisateur

Hunter

Hunter 20714 Manuel d'instructions

Emerson

Emerson CARRERA VERANDA CF542ORB00 Manuel utilisateur

Hunter

Hunter Caraway Manuel d'instructions

Panasonic

Panasonic FV-15NLFS1 Manuel utilisateur

Kompernass

Kompernass KH 1150 Manuel utilisateur

VES

VES FALA100/12V/TR Manuel utilisateur

Vertiv

Vertiv Liebert DCD Manuel utilisateur

Westinghouse

Westinghouse GFP Series Manuel utilisateur

Venmar

Venmar KUBIX HRV PLUS Series Manuel utilisateur

Maico

Maico ECR 31 Manuel utilisateur

Sonnenkonig

Sonnenkonig Dinky Manuel utilisateur

S&P

S&P ECOWATT HXBR Manuel utilisateur

Wider

Wider IMP03369BH Manuel utilisateur

Panasonic

Panasonic F-60DHN Manuel utilisateur

Hinkley

Hinkley HIGHLAND Manuel utilisateur

Broan

Broan 766BN Manuel utilisateur

Premium

Premium PFS16022 Instructions de montage