Quicklynks BA100 Manuel utilisateur
USER’S MANUAL
AUTO BATTERY TESTER
2
Safety precautions
Batteries usually contain toxic and corrosive chemicals, please
kindly avoid battery overcharge,short circuit, leakage and so on.
Before using this product,please learn and comply with the using
rules of the batteries.
•When working with batteries, you need to have plenty of
ventilation, remove your jewelry, wear protective eyewear (safety
glasses) and clothing,and exercise caution.
•During testing on the battery while it is still in the car, make sure
the engine is OFF. Do not near to the engine running and heating
parts.
•Before the test, please use the wire brush and alkaline cleaner
clean battery pole column,as well as grease and dust have error
on test results.
•Please don't store the machine in hig h temperature or humidity
place. It'll damage the machine.
•This machine is for 12V battery only.
AUTO BATTERY TESTER 3
USER’S MANUAL
Table of Contents
1. Product Summary.......................................................................4
1.1 Product Profile...........................................................................4
1.2 Product Function.......................................................................4
1.3 Technical Parameters................................................................5
1.4 Working Environment Requirement..........................................5
2. Tester Structure............................................................................6
2.1 Tool Description.........................................................................6
2.2 Battery Internal Resist Explanation...........................................6
2. 3 Battery Voltage Explanation......................................................7
3. Operating Instructions .................................................................7
3.1 Before Test..................................................................................7
3.1.1 Notice before test....................................................................7
3.1.2 Connecting the Analyzer Before Testing................................8
3.2 Tester Startup ...........................................................................8
3.3 Battery Test................................................................................9
3.3.1 Out off Vehicle & In Vehicle......................................................9
3.3.2 Battery System Standard and Rating...................................10
3.3.3 Test result...............................................................................13
3.3.4 24V system testing...............................................................19
3.4 Additional Functions:................................................................19
3.4.1 Language Choice...................................................................19
3.4.2 Appendix................................................................................20
USER’S MANUAL
AUTO BATTERY TESTER
4
1.Product Summary
1.1 Product Profile
BA100 Battery Tester adopts currently the world's most advanced
conductance testing technology to easily, quickly and accurately measure
the actual cold cranking amps capability of the vehicle starting battery,
healthy state of the battery itself,which can help maintenance personnel to
find the problem quickly and accurately,thus to achieve quick vehicle repair.
Test all automotive cranking lead acid battery, including ordinary lead acid
battery,AGM flat plate battery,AGM spiral battery,and Gel battery,etc.
•Directly detect bad cell battery.
•Polarity reverse connection protection, reverse connection will not damage
the tester or affect the vehicle and battery.
•Directly test the battery with loss of electricity, no need to full charge before
testing.
•Testing standards include currently the world's majority of battery
standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
•Support multi-languages, customer can select different language package,
which includes: English, German, Dutch, Finnish, Polish, French, Italian, etc. Other
languages can also be customized according to user's need.
1.2 Product Function
Battery test is mainly targeted to analyze the battery healthy status to
calculate the actual cold cranking capability of the battery and the aging
extent,which provide reliable analysis evidence for the test and maintenance
of the battery. It notifies the user to replace battery in advance when the
battery getting aged.
AUTO BATTERY TESTER 5
USER’S MANUAL
1.4 Working Environment Requirement
Working Environment Temp.: -20°C-60°C
It is applicable for DIYers mostly, also for automotive manufacturers,
automotive maintenance and repair workshops,automotive battery factories,
automotive battery distributors,and shi p manufacturers,ship maintenance
and repair workshops,etc.
1.3 Technical Parameters
1. Cold Cranking Amps Measure Range:
Measure Standard Measure Range
CCA 100-2000
BCI 100-2000
CA 100-2000
MCA 100-2000
JIS 26A17--245H52
DIN 100-1400
IEC 100-1400
EN 100-2000
SAE 100-2000
GB 100-1400
2. Voltage Measure Range: 6-30V DC
USER’S MANUAL
AUTO BATTERY TESTER
6
1.LCD DISPLAY--Indicates test results. It is a backlit 2-line display with 8
characters on each line.
2.ENTER BUTTON--Confirms a selection (or action) from a menu list, or
returns to the main menu.
3.SCROLL BUTTON--Scrolls throug h menu items or cancel an operation .
4.Clip--Connects the battery test to the vehicle's battery with + and - point.
2.2 Battery Internal Resist Explanation
IR is an important indicator for judging battery capability. When internal resist
exceed a special value, the engine can't be started. The normal IR value of
cars should be under 10mΩ,
But there will be a little differences between different batteries. And greater
CCA with minor resist.
Normally, for the same kind batteries, the IR is smaller, the healthy is better
except for short circuitt.
1
2
2. Tester Structure
2.1 Tool Description
3
4
AUTO BATTERY TESTER 7
USER’S MANUAL
2. 3 Battery Voltage Explanation
Normally, It is impossible for the voltage of the battery after charged to show
100%, The max value is 98%
Charged 98% Above 12.59V
75% 12.45V
50% 12.15V
Discharged below 12.00V
3. Operating Instructions
3.1 Before Test
3.1.1 Notice before test
For testing batteries of low-frequency use, it is necessary to cycle (charge
and discharge) the battery several times before testing, normally 3-5 times
will achieve a reliable test result. Because only after the cycling of the
battery can the chemical properties of battery be restored, after a long
periods of no use. if after 3-5 times of battery charge and discharge, the
battery health state is still lower than 60%, then battery replacement should
be considered.
1. Low use batteries should be charged once every 1-2 months to extend
the battery life for the vehicle or boat..
2. Please turn off the engine before testing.
3. Even when testing an in vehicle battery, after the engine is turned off (for
the most accurate results) wait 10 minutes before testing.
4. In general, if the battery voltage below 12.40V, please kindly recharge it.
5. When charging is finished, do not test immediately, wait at least 10 minutes
to allow the battery to stabilise,then test.
USER’S MANUAL
AUTO BATTERY TESTER
8
3.2 Tester Startup
Tester automatically starts up after the clamps are correctly connected, and
displays the BAT TOOL startup interface. After 2seconds, it automatically
enters the battery test program.
BATTERY TOOL
Ver 1.00
3.1.2 Connecting the Analyzer Before Testing
Before the test,please use the wire brush and alkaline cleaner clean battery
pole column,as well as grease and dust have error on test results.
At the start of the test,to ensure that all of the car electronics has closed
the door closed,and the ignition key is turned off.
The red test cli p to the battery positive electrode, the black test cli p to
battery cathode. again. Tester has an automatic protection function, if the
red and black cli p is negative, screen is not brig ht,but it will not have any
adverse effects on tester and the motor load.
In order to ensure a good connection, please waggle a few times to test
cli ps..
Tester require two cli ps polar to contact with the battery polarity is good,
but with bad connection,the tester will not be able to boot. If this happens,
please clean the terminal after properly connected
AUTO BATTERY TESTER 9
USER’S MANUAL
3.3 Battery Test
Enter the main menu, there are two sub-menus: ANALYZER and LANGAUGE,
as below, they can swift by pressing SCROLL button
MENU: 1.
ANALYZER
MENU: 2.
LANGAUGE
Use "SCROLL" to choose battery's in actual position.
After confirmation, put "ENTER" button.
3.3.1 Out off Vehicle & In Vehicle
OUT OF
VEHICLE
USER’S MANUAL
AUTO BATTERY TESTER
10
In Vehicle: battery connect with engine or vehicle electric.
Out off vehicle: disconnect the battery connection
Use "SCROLL" to choose the types of battery, it has CCA,DIN, JIS, EN, IEC,
GB, SAE, MCA, BCI, CA. And then put "ENTER" button.
Follow the battery actually marked Rating System standards and select the
input rated capacity battery rated by SCROLL button.
BA100 battery tester will test each battery according to the selected system
and rating.
Use SCROLL key to select according to the actual system standard and
rating marked on the battery. See in the below picture,the arrow indicated
location.
IN
VEHICLE
3.3.2 Battery System Standard and Rating
STANDARD
CCA
AUTO BATTERY TESTER 11
USER’S MANUAL
CCA: Cold start current value of the most common specifications developed
by the SAE & BCI, is the most common starting battery rated O ° F (-18 ° C).
BCI: International Battery Standards Committee.
CA: Effective starting current rating at O ° C.
MCA: Marine Battery Standard, Effective starting current rating at O ° C.
JIS: Japanese Industrial Standard display a combination of numbers and
letters on the battery, like 55D23,80D26.
DIN: German automotive industry standards committee.
EN: The European Automobile Manufacturers Association
standards.
SAE: American Society of Engineers Standards.
GB: China National Standard.
Rating range as following:
Table des matières
Manuels Équipement de test populaires d'autres marques
SMART
SMART KANAAD SBT XTREME 3G Series Manuel utilisateur
Agilent Technologies
Agilent Technologies BERT Serial Manuel utilisateur
Agilent Technologies
Agilent Technologies N3280A Manuel utilisateur
Vernier
Vernier Go Direct Voltage Manuel utilisateur
Lifeloc
Lifeloc R.A.D.A.R. Manuel utilisateur
Fluke
Fluke T5-600 Instructions d'utilisation et d'installation
