Questyle Audio QP2R Manuel utilisateur

www.questyleaudio.com

Contents
02
03
05
05
06
06
06
07
07
08
08
08
09
09
10
13
13
14
14
16
18
21
26
27
28
Getting Started
QP2R Overview
Power Management
Charge QP2R Battery
Insert/Remove Micro SD Card
Update Firmware
Connect QP2R to Computer
Transfer Music Files
Play Music Files
How to Use QP2R
Native Playback of Music Files
Main Menu Description
Icons in Status Bar
Operation Instructions
Settings
QP2R USB DAC
QP2R USB DAC Feature
Instructions
PC System Requirements
USB DAC Driver Installation
DSD Setup on JRiver Media Center
Foobar Setup
Setup on Mac OS X
Specifications
Miscellaneous

02
Thank you for buying Questyle Audio QP2R High-res Portable Audio Player.
Read this User Manual to find out how to use QP2R.
Getting Started
In the Box:
QP2R
Cloth bag
QP2R Quick Start Guide
USB type C cable
Optical cable connector
Silicone disc for the steering wheel
Silicone patch for the OK button
1pc
1pc
1pc
1pc
1pc
1pc
1pc
Optical cable
connector
Cloth bag QP2R Quick Start Guide
Silicone disc for
the steering wheel
Silicone patch
for the OK button
USB type C
cable
➁
表面
保护用
➁
表面
保护用

QP2R Overview
Stepping volume control knob
Back
Next/ Fast forward
OK/Pause/Play
IPS display screen
Previous/ Fast backward
Favorite /Add to
/Loop /Delete
Steering wheel
(Up/Down/Left/Right)
03
① Stepping volume control knob: rotate the knob to adjust volume. You can go
to “Settings”-“Volume lock” and toggle it “On” to make the volume control inactive
while the screen is off.
② Favorites/Loop/Add to/Delete button: with a song playing, click this button to
add the song to Favorites/Playlists, or to Loop/Delete it.
③ Back button: click it to move to the previous menu. (Press and hold it to go back
to the main menu.)
④ Steering wheel: scroll the wheel to move up, down, left or right.
⑤ OK/Pause/Play button: click it to confirm selections or to play/pause a song, or
to wake the screen.(Press and hold it to disconnect QP2R from the USB connection
to your computer.)
⑥ Previous/Fast backward button: click it to move to the previous track, or to the
left/up selections. Press and hold it to go backward fast.
⑦ Next/Fast forward button: click it to move to next track, or to the right/down
selections. Press and hold it to go forward fast.

R- R+ L+ L-
04
⑧ 3.5mm headphone jack/Optical output jack: it is used to plug in a 3.5mm
headphone, or to output optical signals while QP2R is connected to other
devices.(You can use the included optical cable connector.)
⑨ 2.5mm balanced headphone jack: it is used to plug in a 2.5mm balanced
headphone. (Refer to the Balanced Pinmap to get detailed specifications for
headphones.)
⑩ Micro SD card slot: it is used to insert in a micro SD card (Max. 200G).
USB type C port: it is used to connect QP2R to your computer, or to charge
QP2R battery. Please use the included USB type C cable.
BIAS indicator: it shows the “Standard” BIAS indicated by orange light, and the
“High” BIAS by red light.
Power button: press this button to turn on/off the screen, press and hold the
button to turn on/off QP2R.
11
12
13
3.5mm headphone jack
/ Optical output
2.5mm balanced headphone jack
Previous track
Play/Pause
Next track
BIAS indicator
(Red/Amber)
Power button
Micro SD card slot
USB type C port
Balanced Pinmap

1) Turn on/off QP2R
press and hold the Power button to turn on/off QP2R.
2) Turn on/off the screen
① When the screen is on, press the Power button to turn it off.
②When the screen is off, press the Power button to turn it on.
3) Reset
If QP2R fails to work unexpectedly, you can press and hold the Power button for 10
seconds to force QP2R to shutdown, then restart QP2R.
Connect QP2R to an adapter or a computer with the included USB type C cable
and charge QP2R battery.
- QP2R battery will be fully charged in about 4 hours via a 5V/2A adapter. It will
take a little longer to be fully charged via a computer.
- QP2R can work while charging, which will extend the charging time.
NOTE:
① The USB type C port for charging and data transfer follows the USB 2.0
communication protocol. Fast charging is not allowed. Do not connect QP2R to a
fast charger, otherwise, the failure caused by fast charging will not be covered in
free warranty.
② Do not use any other USB cable except the included USB cable.
Power Management
Charge QP2R Battery
05

Insert/Remove Micro SD Card
1) Copy file “DAP003GL.upt” to your micro SD card and insert it into the card slot.
2) Start QP2R and select “Settings” - “Update firmware” - “Begin”.
3) After update, the display will show “Update is finished”.
Update Firmware
Connect QP2R to your computer with the included USB type C cable.
Connect QP2R to Computer
NOTE
① Insert your micro SD card very gently to avoid damage.
②Do not remove the micro SD card while it is in use, otherwise it may result in
corrupting/deleting data or failure, even damage to the micro SD card.
③ If the the micro SD card can’t be recognized or if it is malfunctioning, please
format the SD card before using it. The FAT32 format is recommended.
06
Micro SD card slot
USB type C port
Insert your micro SD card into the card slot with its face down. Remove the inserted
card by pressing it. ( As shown in the picture. )

Connect QP2R to your computer via the included USB type C cable, and you will
see a computer-QP2R connection (as shown below) on the QP2R screen.
Meanwhile, there will be a new removable storage device named QP2R shown on
your computer, and you can transfer music files to the QP2R. If the connection isn’t
shown on the QP2R screen, please go to “Settings”-“USB ”-“Memory”.
NOTE
In the computer-QP2R connection, you can press the OK button of QP2R to
disconnect the USB connection.
Transfer Music Files
1. Turn on QP2R and go to “Playlists”.
2. Select any music file on the lists and play it.
Play Music Files
07

How to Use QP2R
NOTE:
①With headphone single-ended out, headphone balanced out or line out, QP2R
supports the native playback of audio files sampling at PCM 32kHz-384kHz and
DSD64-DSD256.
②With optical or S/PDIF out, QP2R supports the native playback of audio files
sampling at PCM 32kHz-PCM384kHz (PCM384 will be converted to PCM192),
files of DSD64-DSD128 will be converted to PCM88.2kHz. Files of DSD256 will
not be supported in this case.
Native Playback of Music Files
Select language when you start QP2R for the first time, then view the main menu
items including “Playing”, “Category”, “Playlists”, “Browse files” and “Settings”.
NOTE:
When you select “Playing” but without a music file playing now, it will navigate to
the sub categories under “Category”. When you select “Category” for the first time,
you need to update the library.
Main Menu Description
status bar
Now Playing
By Category
Playlists
Browse Files
Settings
08
QP2R can play music files on Internal memory and micro SD card. It supports
3.5mm headphone single-ended out, 2.5mm headphone balanced out, line out,
optical and S/PDIF out.

:Gain: (L: low gain, M: middle gain, H: high gain)
:Volume
:Battery
:Micro SD card
:Play mode: Order/Single/Loop/Shuffle
Icons in Status Bar
1) Playing: when you see the Playing screen, you can scroll the steering wheel
to view “Playing”, “Lyrics” and “Song information”.
Click and you will see icons for Favorites/Loop/Add to/Delete, then you can add
the playing song to “Favorites”, or set the play mode, or “Delete” it.
2) Category: you can play music files by the category of Track, Album, Artist,
Genre, or DSD. Select a category and navigate to a music file and then press the
OK button to play it.
Operation Instructions
20
09
Table des matières
Autres manuels Questyle Audio Lecteur multimédia

















