Replacing The Battery
1. Identify location A and B on the diagram to access battery,
press pin A towards B, and pull out the battery holder.
2. Remove the old battery, then insert the newbattery into the battery
holder with the + side facing upwards. Lithium battery (Cr2025)
3. Push the battery holderback into its place until it locks firmly in place.
Note:
To prevent leakage of fluid from the lithium battery, remove the battery when not using the remote control unit for long periodsof
time (one month or more). If the battery leaks fluid, carefully wipe it out of the battery case, thenchange with a new lithium battery.
Basic Operation
1. Power on /off
Press the “Power on /off” button on remote control to turn power on. Press button again to turn off the unit.
2. PLAY/PAUSE
On normal play disc mode, press “PLAY/PAUSE” button to pause. Press button again to continue playing.
3. STOP
In play mode, press “STOP” button to stop play. Press “PLAY” button to resume playing.
4. DISC IN /OUT
Press the “EJECT” button to eject disc. Insert disc into disc slot until unit automatically retrieves disc.
5. MUTE Control
Press “MUTE” button on remote control to turn off the sound. Pressing it again will resume play at the previous volume level.
Note: Some functions do not work during mute operation.
6. Function mode switch:
Press “MODE” button to toggle through different audio/video sources.
Note: If no source is available, radio will not toggle through modes.
7. Press “I< or >I ” In DVD mode, short-press for previous/next item, long-press for fast forward/fast back; In TV mode, short-press
for previous/next channel, long-press for manual search forward up/down; In FM mode, short-press to adjust radio frequency,
long-press for manual search forward up/down.
8. OSD:
Press the “OSD” remote control key, the screen will display elapsed time, remaining time, title, chapter, section time,
time remaining chapters.
- 9 -
www.quantumaudio.net
