Quantifi Photonics BERT 1005 Series Manuel utilisateur

Bit Error Rate Tester | BERT 1005

Quantifi Photonics Ltd. Version 2.04 2

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form,

be it electronically, mechanically, or by any other means such as photocopying, recording or otherwise,

without the prior written permission of Quantifi Photonics Ltd. (Quantifi Photonics).

Information provided by Quantifi Photonics is believed to be accurate and reliable.

However, no responsibility is assumed by Quantifi Photonics for its use nor for any infringements of

patents or other rights of third parties that may result from its use. No license is granted by implication

or otherwise under any patent rights of Quantifi Photonics.

The information contained in this publication is subject to change without notice.

Trademarks

Quantifi Photonics’ trademarks have been identified as such. However, the presence or absence of such

identification does not affect the legal status of any trademark.

LabVIEW™, MATLAB® and Python® are trademarks of National Instruments, The MathWorks Inc., and the

Python Software Foundation, respectively. Neither Quantifi Photonics nor any software programs or

other goods or services offered by Quantifi Photonics are affiliated with, endorsed by, or sponsored by

National Instruments, The MathWorks Inc., and the Python Software Foundation.

Units of Measurement

Units of measurement in this publication conform to SI standards and practices.

EU Authorized Representative

Certification Company

Veluwezoom 42

1327 AH ALMERE

The Netherlands

+31 (0)36 202 40 37

[email protected]

Version: 2.04

Bit Error Rate Tester | BERT 1005 
Quantifi Photonics Ltd. Version 2.04 3 
Contents 
1Conventions............................................................................................................................7 
2Safety information.............................................................................................................. 8 
 Optical laser radiation precautions..........................................................................................................................8 
 Electrostatic discharge precautions........................................................................................................................8 
 Electromagnetic compatibility....................................................................................................................................8 
3Introducing the BERT 1005 –Bit error rate tester................................................... 9 
 BERT 1005 PXIe module overview & features......................................................................................................9 
 BERT 1005 MATRIQ instrument overview & features......................................................................................9 
 BERT 1005 error detector RF input and the pattern generator RF output .......................................... 10 
 Status LEDs..........................................................................................................................................................................11 
4Connecting optical fibers................................................................................................12 
 Cleaning and connecting optical fibers.................................................................................................................12 
 Connector care .................................................................................................................................................................13 
 Cable selection..................................................................................................................................................................13 
4.3.1 Use a torque wrench......................................................................................................................................13 
4.3.2 Make a connection .........................................................................................................................................14 
4.3.3 Separate a connection..................................................................................................................................14 
5Handling the BERT 1005 ..................................................................................................15 
 BERT 1005 PXIe module installation........................................................................................................................15 
 BERT 1005 PXIe module uninstallation.................................................................................................................. 16 
 BERT 1005 MATRIQ instrument installation ........................................................................................................17 
6Software installation for the BERT 1005....................................................................18 
 Cohesion Installer information for PXIe modules..............................................................................................18 
6.1.1 Installation overview ......................................................................................................................................18 
6.1.2 Installation process.........................................................................................................................................18 
 Quantifi Photonics PXIe system utility applications.........................................................................................21 
6.2.1 Cohesion Manager utility.............................................................................................................................21 
6.2.2 Cohesion Firmware Updater utility ....................................................................................................... 22 
 Installing software for MATRIQ instruments..................................................................................................... 23 

Bit Error Rate Tester | BERT 1005 
Quantifi Photonics Ltd. Version 2.04 4 
6.3.1 Installing Cohesion Operator on client computer(s) ..................................................................... 23 
6.3.2 Checking MATRIQ firmware versions and other product information ................................ 25 
6.3.3 Upgrading a MATRIQ instrument with the latest firmware....................................................... 26 
6.3.4 Restoring factory settings on a MATRIQ instrument...........................................................................27 
7CohesionUI...........................................................................................................................28 
 Accessing CohesionUI for PXIe modules............................................................................................................. 28 
 Accessing CohesionUI for MATRIQ instruments ............................................................................................. 28 
 Home page........................................................................................................................................................................ 29 
 Modules list ....................................................................................................................................................................... 30 
7.4.1 Set and Actual values....................................................................................................................................31 
 Settings page.....................................................................................................................................................................31 
7.5.1 System controls for PXIe modules......................................................................................................... 32 
7.5.2 Network and Update settings controls for MATRIQ instruments........................................... 34 
7.5.3 Configuring the Network Interface settings for MATRIQ instruments................................. 34 
7.5.4 Setting the USB IP address for MATRIQ instruments.................................................................. 35 
7.5.5 Setting the Ethernet IP address for MATRIQ instruments......................................................... 35 
 SCPI Command Console (available on PXIe modules) ................................................................................. 36 
 Info panel............................................................................................................................................................................ 39 
8BERT 1005 control with CohesionUI ...........................................................................40 
 Module configuration .....................................................................................................................................................41 
8.1.1 Set up the data rate .......................................................................................................................................41 
8.1.2 Configure the trigger out signal ............................................................................................................. 42 
 Check channels status ................................................................................................................................................ 43 
 Error detection..................................................................................................................................................................44 
8.3.1 Error detection indicators...........................................................................................................................44 
8.3.2 Start / Stop error detection...................................................................................................................... 45 
8.3.3 Specify the pattern of the input signal................................................................................................ 45 
8.3.4 Invert the polarity of the test pattern................................................................................................... 45 
8.3.5 Configure the receiver equalization setting...................................................................................... 46 
8.3.6 Inject errors ...................................................................................................................................................... 46 
8.3.7 Specify the result display type .................................................................................................................47 
8.3.8 ED point mode..................................................................................................................................................47 
8.3.9 Eye scan............................................................................................................................................................. 48 
8.3.10 Bathtub scan ................................................................................................................................................... 49 
 Chart operations ..............................................................................................................................................................51 
 Pulse pattern generation............................................................................................................................................ 52 
8.5.1 Set up the transmitter de-emphasis .................................................................................................... 52 
8.5.2 Set the cross-point level............................................................................................................................. 54 

Bit Error Rate Tester | BERT 1005 
Quantifi Photonics Ltd. Version 2.04 5 
8.5.3 Invert the generated pattern ................................................................................................................... 55 
8.5.4 Enable / Disable pattern generation.................................................................................................... 55 
9Programming guide .........................................................................................................56 
 Programming conventions ........................................................................................................................................ 56 
9.1.1 Index addressing of modules (slot, source) and units (channel).............................................. 56 
 Common system command summary..................................................................................................................57 
 Common system command descriptions............................................................................................................57 
 Specific command summary.................................................................................................................................... 58 
 Specific command descriptions..............................................................................................................................60 
9.5.1 Slot commands...............................................................................................................................................60 
9.5.2 Configuration commands........................................................................................................................... 61 
 BERT 1005 PXIe Multi Chassis mode operation................................................................................................78 
9.6.1 NI-MAX application Multi Chassis mode .............................................................................................78 
9.6.2 SCPI Multi Chassis commands................................................................................................................79 
 SCPI Command Console (available on MATRIQ instruments)..................................................................80 
10 Example: Control of the BERT 1005 with SCPI .......................................................82 
 NI-MAX application........................................................................................................................................................ 84 
 NI-VISA application........................................................................................................................................................ 85 
 Python® 2.7 code example..........................................................................................................................................86 
 MATLAB® code example ..............................................................................................................................................87 
 LabVIEW™ application.................................................................................................................................................. 88 
10.5.1 Soft Panels........................................................................................................................................................ 88 
10.5.2 LabVIEW™ Virtual Instruments (VIs) ...................................................................................................... 89 
11 Maintenance.......................................................................................................................90 
 Annual calibration schedule...................................................................................................................................... 90 
12 Technical support...............................................................................................................91 
 Contacting the Technical Support Group............................................................................................................ 91 
 Transportation.................................................................................................................................................................. 91 
13 Warranty ..............................................................................................................................92 
 General information...................................................................................................................................................... 92 
 Liability ................................................................................................................................................................................ 92 
 Exclusions........................................................................................................................................................................... 92 
 Certification ...................................................................................................................................................................... 93 

Bit Error Rate Tester | BERT 1005

Quantifi Photonics Ltd. Version 2.04 6

Service and repairs ....................................................................................................................................................... 93

Bit Error Rate Tester | BERT 1005

Quantifi Photonics Ltd. Version 2.04 7

1Conventions

Before using the product described in this manual, take note of the following conventions:

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Do not proceed unless the required conditions are met and understood.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Do not proceed unless the required conditions are met and understood.

Indicates a potentially hazardous situation which, if not avoided, may result in component damage.

Do not proceed unless the required conditions are met and understood.

Refers to information about this product that you should not overlook.

Indicates some information that requires your attention or some extra information for the current

topic.

Bit Error Rate Tester | BERT 1005

Quantifi Photonics Ltd. Version 2.04 8

2Safety information

Before using the BERT 1005 product, ensure that the following safety information has been read and

understood.

Optical laser radiation precautions

Do not install or terminate fibers while the light source is active. Care must be taken to ensure

that the instrument has been turned OFF before inspecting the end face(s) of the instrument,

or any optical patch cords connected to this instrument. Never look directly into a live fiber;

ensure that your eyes are protected at all times.

The use of controls, adjustments, and procedures other than those specified herein may result

in exposure to hazardous situations involving optical radiation.

Electrostatic discharge precautions

The BERT 1005 product is sensitive to electrostatic discharge (ESD). Store the unused product in

the original protective electrostatic packaging that the product was shipped in.

Ensure that a wrist strap and grounding table mat is used when unpacking or handling the BERT 1005

product. Proper grounding and ESD management practices should always be followed to ensure that no

ESD damage is caused to the BERT product.

Electromagnetic compatibility

•For electromagnetic compatibility, this instrument is a Class A product. It is intended for use

in an industrial environment. There may be potential difficulties in ensuring electromagnetic

compatibility in other environments, due to conducted as well as radiated disturbances.

•Wherever the symbol is printed on the unit, refer to the instructions provided in the

device documentation for related safety information. Ensure that the required conditions

are met and understood before using the product.

Bit Error Rate Tester | BERT 1005

Quantifi Photonics Ltd. Version 2.04 9

3Introducing the BERT 1005 –Bit error rate tester

The BERT 1005 product is a 4-channel pattern generator and error detector for the design,

characterization, and production of optical transceivers and opto-electrical components at data rates

up to 14.5 Gb/s.

BERT 1005 PXIe module overview & features

BERT 1005 MATRIQ instrument overview & features

Status LEDs for error detector

Error detector RF input

Status LEDs for pattern generator

Pattern generator RF output

Divided clock output

Ethernet port

Ventilation fan (DO NOT OBSTRUCT)

Power supply port

USB type B port

IP address LCD screen

On / Off push button

Fastening screws

Status LEDs for error detector

RF harness

Error detector RF input

Status LEDs for pattern generator

Pattern generator RF output

Divided clock output

Model identifier label

Fastening clip

PXIe headers

BERT PXIe module information

Bit Error Rate Tester | BERT 1005

Quantifi Photonics Ltd. Version 2.04 10

•You must use the external power supply that has been supplied by Quantifi Photonics

with the unit. Any attempt to use a different external power supply may cause product

damage and will void your warranty.

•The external power supply that has been used with the unit can only be used with that

unit. Do not use it with any other product.

BERT 1005 error detector RF input and the pattern generator RF output

Error detector channel 1 (Positive)

Pattern generator channel 1 (Positive)

Error detector channel 1 (Negative)

Pattern generator channel 1 (Negative)

Error detector channel 2 (Positive)

Pattern generator channel 2 (Positive)

Error detector channel 2 (Negative)

Pattern generator channel 2 (Negative)

Error detector channel 3 (Positive)

Pattern generator channel 3 (Positive)

Error detector channel 3 (Negative)

Pattern generator channel 3 (Negative)

Error detector channel 4 (Positive)

Pattern generator channel 4 (Positive)

Error detector channel 4 (Negative)

Pattern generator channel 4 (Negative)

Table des matières

Autres manuels Quantifi Photonics Équipement de test

Quantifi Photonics

Quantifi Photonics SLED 1000 Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur