Quanmax HPC-1000 Manuel utilisateur

-1000

User’s Manua

HPC-1000

10.1” Home Automation Panel PC with

Intel® Atom N270 + Intel® 945GSE/ ICH7-M

User’s Guide

-1000

User’s Manua

Contact Info: Quanmax Inc.

5F, No. 415, Ti-Ding Blvd. Sec. 2, NeiHu District,

Taipei, Taiwan 114

Tel: +886-2-2799-2789

Fax: +886-2-2799-7399

Visit our site at: www.quanmax.com

The information in this user’s guide is provided for reference only. Quanmax does not assume any

liability arising out of the application or use of the information or products described herein. This user’s

guide may contain or reference information and products protected by copyrights or patents and does

not convey any license under the patent rights of Quanmax, nor the rights of others.

Quanmax is a registered trademark of Quanmax. All trademarks, registered trademarks, and trade

user’s guide contains information proprietary to Quanmax. Customers may reprint and use this user’s

guide in other publications. Customers may alter this user’s guide and publish it only after they remove

the Quanmax name, cover, and logo.

Quanmax reserves the right to make changes without notice in product or component design as

warranted by evolution in user needs or progress in engineering or manufacturing technology.

Changes which affect the operation of the unit will be documented in the next revision of this user’s

guide.

Revision Date Edited by Changes

1.0 10/29/2009 SLee Initial Release

1.01 11/18/2009 SLee FCC Compliance Statement Update

1.02 12/08/2009 SLee Add Wall & Desktop Mounting Kits

1.03 12/16/2009 SLee Update Power Rating, RS232/422/485

Content

-1000

User’s Manua

Content

Content.......................................................................................................................3

Figures.......................................................................................................................4

Tables.........................................................................................................................5

Safety Instructions......................................................................................................6

　Before You Begin..................................................................................6

　When Working Inside a Computer........................................................6

　Preventing Electrostatic Discharge.......................................................7

　Instructions for Lithium Battery .............................................................8

　Voltage Ratings.....................................................................................8

Preface.......................................................................................................................9

　How to Use This Guide.........................................................................9

　Unpacking.............................................................................................9

　Regulatory Compliance Statements......................................................9

　Warranty Policy...................................................................................10

　Maintaining Your Computer................................................................. 11

Chapter 1 Introduction...........................................................................................14

　Overview.............................................................................................14

　Product Specifications ........................................................................15

　System Tour........................................................................................16

　External Connectors ...........................................................................17

　Mechanical Dimensions......................................................................19

Chapter 2 Getting Started......................................................................................20

　Power Connection Turning on the system ..........................................20

　VESA Mounting...................................................................................20

　Wall Mount Kit.....................................................................................21

　Desktop Stand ....................................................................................22

　Operating System and Drivers............................................................22

　Maintenance and Prevention..............................................................23

Figures

-1000

User’s Manua

Figures

Figure 1 Mechanical Layout - Front and Side ............................................16

Figure 2 Mechanical Layout - I/O Panel.....................................................16

Figure 3 Mechanical Dimensions...............................................................19

Figure 4 Turning on the system..................................................................20

Figure 5 Mounting hole locations on the HPC-1000...................................20

Figure 6 Wall Mounting Demonstrations....................................................21

Figure 7 Install Desktop Stand...................................................................22

Tables

-1000

User’s Manua

Tables

Table 1 Specifications ................................................................................15

Table 2 USB (USB2.0 Port 0, 1 Type A Connector)....................................17

Table 3 LAN (10/100/1000 Ethernet RJ-45 Connector)..............................17

Table 4 Digital I/Os (DB9 Female Connector)............................................17

Table 5 COM1 (RS-232/422/485 DB-9 Connector)....................................17

Table 6 KB/MS (PS/2 KB/MS Mini-DIN Connector)....................................18

Table 7 DVI-I (DVI-I Connector).................................................................18

Safety Instructions

-1000

User’s Manua

Safety Instructions

Before You Begin

Before handling the product, read the instructions and safety guidelines on the

following pages to prevent damage to the product and to ensure your own personal

safety. Refer to the “Advisories” section in the Preface for advisory conventions used

in this user’s guide, including the distinction between Warnings, Cautions, Important

Notes, and Notes.

Always use caution when handling/operating a computer. Only qualified,

experienced, authorized electronics service personnel should access the

interior of a computer. The power supplies produce high voltages and

energy hazards, which can cause bodily harm.

Use extreme caution when installing or removing components. Refer to the

installation instructions in this user’s guide for precautions and procedures.

If you have any questions, please contact Quanmax Post-Sales Technical

Support.

WARNING

High voltages are present inside the chassis when the unit’s power cord is plugged into

an electrical outlet. Turn off system power, turn off the power supply, and then

disconnect the power cord from its source before removing the chassis cover. Turning off

the system power switch does not remove power to components.

When Working Inside a Computer

Before taking covers off a computer, perform the following steps:

1. Turn off the computer and any peripherals.

2. Disconnect the computer and peripherals from their power sources or

subsystems to prevent electric shock or system board damage. This does not

apply when hot swapping parts.

3. Follow the guidelines provided in “Preventing Electrostatic Discharge” on the

following page.

4. Disconnect any telephone or telecommunications lines from the computer.

In addition, take note of these safety guidelines when appropriate:

Safety Instructions

-1000

User’s Manua

To help avoid possible damage to system boards, wait five seconds after

turning off the computer before removing a component, removing a system

board, or disconnecting a peripheral device from the computer.

When you disconnect a cable, pull on its connector or on its strain-relief loop,

not on the cable itself. Some cables have a connector with locking tabs. If you

are disconnecting this type of cable, press in on the locking tabs before

disconnecting the cable. As you pull connectors apart, keep them evenly

aligned to avoid bending any connector pins. Also, before connecting a cable,

make sure both connectors are correctly oriented and aligned.

CAUTION

Do not attempt to service the system yourself except as explained in this user’s guide.

Follow installation and troubleshooting instructions closely.

Preventing Electrostatic Discharge

Static electricity can harm system boards. Perform service at an ESD workstation

and follow proper ESD procedure to reduce the risk of damage to components.

Quanmax strongly encourages you to follow proper ESD procedure, which can

include wrist straps and smocks, when servicing equipment.

You can also take the following steps to prevent damage from electrostatic

discharge (ESD):

When unpacking a static-sensitive component from its shipping carton, do not

remove the component’s antistatic packing material until you are ready to install

the component in a computer. Just before unwrapping the antistatic packaging,

be sure you are at an ESD workstation or grounded. This will discharge any

static electricity that may have built up in your body.

When transporting a sensitive component, first place it in an antistatic container

or packaging.

Handle all sensitive components at an ESD workstation. If possible, use

antistatic floor pads and workbench pads.

Handle components and boards with care. Don’t touch the components or

contacts on a board. Hold a board by its edges or by its metal mounting bracket.

Do not handle or store system boards near strong electrostatic, electromagnetic,

magnetic, or radioactive fields.

Safety Instructions

-1000

User’s Manua

Instructions for Lithium Battery

WARNING

Danger of explosion when battery is replaced with incorrect type. Only replace

with the same or equivalent type recommended by the manufacturer.

Do not dispose of lithium batteries in domestic waste. Dispose of the battery

according to the local regulations dealing with the disposal of these special

materials (e.g. to the collecting points for disposal of batteries)

Voltage Ratings

The external power adaptor of the HPC-1000 has the following voltage ratings:

Input: 100-240 VAC, 50-60 Hz

Output: 30W, +12Vdc, 2.5A

Power Supplies:

Touch Electronic Co. Ltd / SA06-30S12R-W

Preface

-1000

User’s Manua

Preface

How to Use This Guide

This guide is designed to be used as step-by-step instructions for installation, and as

a reference for operation, troubleshooting, and upgrades.

NOTE

Driver downloads and additional information are available under Downloads on our web

site: www.quanmax.com.

Unpacking

When unpacking, follow these steps:

1. After opening the box, save it and the packing material for possible future

shipment.

2. Remove all items from the box. If any items listed on the purchase order

are missing, notify Quanmax customer service immediately.

3. Inspect the product for damage. If there is damage, notify Quanmax

customer service immediately. Refer to “Warranty Policy” for the return

procedure.

Regulatory Compliance Statements

This section provides the FCC compliance statement for Class B devices.

FCC Compliance Statement:

This equipment has been tested and found to comply with limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reason able protection against harmful interference in residential installations. This

equipment generates, uses, and can radiate radiofrequency energy, and if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

Preface

-1000

User’s Manua

interference will not occur in a particular installation. If this equipment does cause

interference to radio or television equipment reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Quanmax could void the user's

authority to operate the equipment.

NOTE

The assembler of a personal computer system may be required to test the system

and/or make necessary modifications if a system is found to cause harmful

interference or to be noncompliant with the appropriate standards for its intended use.

Warranty Policy

Limited Warranty

Quanmax Inc.’s detailed Limited Warranty policy can be found under Support at

www.quanmax.com. Please consult your distributor for warranty verification.

The limited warranty is void if the product has been subjected to alteration, neglect,

misuse, or abuse; if any repairs have been attempted by anyone other than

Quanmax or its authorized agent; or if the failure is caused by accident, acts of God,

or other causes beyond the control of Quanmax or the manufacturer. Neglect,

misuse, and abuse shall include any installation, operation, or maintenance of the

product other than in accordance with the user’s guide.

No agent, dealer, distributor, service company, or other party is authorized to change,

modify, or extend the terms of this Limited Warranty in any manner whatsoever.

Quanmax reserves the right to make changes or improvements in any product

without incurring any obligation to similarly alter products previously purchased.

Return Procedure

For any Limited Warranty return, please contact Support at www.quanmax.com and

Table des matières

Autres manuels Quanmax Écran tactile

Quanmax

Quanmax QBOX-200S Manuel utilisateur

Quanmax

Quanmax OPC-1700 Manuel utilisateur

Quanmax

Quanmax KPC-1530 Manuel utilisateur

Quanmax

Quanmax KPC-1200 Manuel utilisateur

Quanmax

Quanmax HPC-1050 Manuel utilisateur

Quanmax

Quanmax KPC-1900 Series Manuel utilisateur

Quanmax

Quanmax KPC-1250 Manuel utilisateur

Quanmax

Quanmax KPC-1900 Series Manuel utilisateur

Quanmax

Quanmax KPC-15B0 Manuel utilisateur

Quanmax

Quanmax OPC-1850 Manuel utilisateur

Quanmax

Quanmax OPC-1560 Manuel utilisateur

Quanmax

Quanmax KPC-1920 Manuel utilisateur

Quanmax

Quanmax TOUCH TOY Instructions d'installation et d'entretien

Quanmax

Quanmax PPC-1850 Series Manuel utilisateur

Quanmax

Quanmax KPC-1770 Series Manuel utilisateur

Quanmax

Quanmax KPC-1760 Manuel utilisateur

Quanmax

Quanmax HPC-1010 Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur